{"id":206,"date":"2026-07-24T06:13:54","date_gmt":"2026-07-24T06:13:54","guid":{"rendered":"https:\/\/5speedtransmission.com\/?post_type=product&p=206"},"modified":"2026-07-24T06:13:54","modified_gmt":"2026-07-24T06:13:54","slug":"heavy-duty-series-roller-chains","status":"publish","type":"product","link":"https:\/\/5speedtransmission.com\/sv\/produkt\/heavy-duty-series-roller-chains\/","title":{"rendered":"Rullkedjor i kraftig serie"},"content":{"rendered":"
\n
\n
\n

H-serien<\/p>\n

och BH\/BHF Icke-standard<\/p>\n<\/div>\n

\n

9,525 till 76,2 mm<\/p>\n

Tonh\u00f6jdsomr\u00e5de<\/p>\n<\/div>\n

\n

Upp till 1 650 kN<\/p>\n

Triplex brottlast<\/p>\n<\/div>\n

\n

ISO 9001<\/p>\n

Certifierad kvalitet<\/p>\n<\/div>\n<\/div>\n

Heavy Duty Roller Chain – Product Overview<\/h2>\n
\n
\n

Koreas st\u00e4ndiga makt rullkedjor i kraftig serie<\/a> are an uprated variant of the standard short pitch roller chain range, designed for applications where the operating load, shock loading severity, or duty cycle exceeds what the standard A series can comfortably handle at the same pitch. The heavy duty designation refers to thicker link plates – typically 25% to 40% heavier than the standard A series plate at the same pitch – combined with larger diameter pins and in some sizes an increased inner width, all while maintaining the same pitch so that the chain can run on standard pitch sprockets without any modification to the sprocket or drive configuration.<\/p>\n

EP H-serien t\u00e4cker kedjestorlekar *35H till 240H i simplex (enkeltr\u00e5dig, suffix -1), duplex (tv\u00e5tr\u00e5dig, suffix -2) och triplex (tretr\u00e5dig, suffix -3) konfigurationer. H-suffixet \u00e4r branschstandardbeteckningen f\u00f6r kraftiga plattgeometrier: en 35H-kedja har samma stigning p\u00e5 9,525 mm och samma rulldiameter som en standard 35-kedja, men l\u00e4nkplattorna \u00e4r tjockare, vilket ger den en h\u00f6gre dragh\u00e5llfasthet och en l\u00e4ngre utmattningslivsl\u00e4ngd vid upprepad belastning. Detta \u00e4r viktigt i applikationer som huvuddrev f\u00f6r jordbrukssk\u00f6rdare, timmerd\u00e4ck, huvuddrev f\u00f6r f\u00f6rpackningsmaskiner och allm\u00e4nna industriella drivningar som startar och stoppar under belastning, upplever vibrationer fr\u00e5n kopplade maskiner eller m\u00e5ste hantera de st\u00f6ttoppar som genereras n\u00e4r kedjan pl\u00f6tsligt lossnar fr\u00e5n slack under lastv\u00e4ndning.<\/p>\n

Beyond the standard H series, Korea Ever-Power manufactures a comprehensive range of non-standard heavy duty chains under the BH and BHF designations. These are chains developed for specific OEM applications where neither the standard A series nor the standard H series geometry exactly matches the sprocket tooth form or structural requirement of the original equipment. The BH range includes straight side plate variants (where the inner and outer plates are the same flat profile rather than the usual waisted figure-eight shape), flanged plate variants for guide track applications, and combination chains with mixed roller and bush positions for specific machine functions. Bush chains within both the H series and the BH range are marked with an asterisk (*) – for these chains the d1 dimension in the specification table refers to the external diameter of the bush rather than an outer roller diameter, because no separate outer roller is fitted.<\/p>\n

Korea Ever-Powers produktionslinje f\u00f6r tunga kedjor anv\u00e4nder samma kallformnings- och v\u00e4rmebehandlingsprocesser som A-serien, med genomh\u00e4rdade st\u00e5lstift, s\u00e4tth\u00e4rdade bussningar och v\u00e4rmebehandlade plattor. De tyngre plattsektionerna i H-serien kr\u00e4ver l\u00e4ngre v\u00e4rmebehandlingscykler f\u00f6r att uppn\u00e5 enhetliga k\u00e4rnegenskaper, och de st\u00f6rre stiftdiametrarna kr\u00e4ver noggrannare dimensionskontroll vid slipning f\u00f6r att bibeh\u00e5lla korrekt spelrum mellan stift och bussning f\u00f6r god sm\u00f6rjfilmsretention. F\u00f6rsp\u00e4nning appliceras p\u00e5 varje monterad H-seriekedja f\u00f6re stigningsm\u00e4tning f\u00f6r att eliminera installationsf\u00f6rl\u00e4ngning, p\u00e5 samma s\u00e4tt som i standard A-serien. Kopplingsl\u00e4nkar i H-serien anv\u00e4nder saxsprint eller saxsprintsretention snarare \u00e4n fj\u00e4derkl\u00e4mman som anv\u00e4nds i l\u00e4ttare standardkedjor, vilket \u00e5terspeglar den h\u00f6gre skarvbelastningen vid tung drift.<\/p>\n<\/div>\n

\"Korea<\/div>\n<\/div>\n
\n

M\u00e5ttnyckel:<\/strong> P = Stigning | d1 = Rulldiameter max (bussningskedja: utv\u00e4ndig bussningsdiameter) | b1 = Inre bredd mellan plattorna min | d2 = Stiftdiameter max | L = Stiftl\u00e4ngd max | Lc = Stiftl\u00e4ngd anslutningsl\u00e4nk max | h2 = Inre plattdjup max | T = Platttjocklek max | Pt = Tv\u00e4rg\u00e5ende stigning (duplex\/triplex) | Q = Min. dragh\u00e5llfasthet kN\/lbf | Q0 = Genomsnittlig dragh\u00e5llfasthet kN | q = Vikt kg\/m | * = Bussningskedja | F = Raka (platta) sidopl\u00e5tar<\/p>\n<\/div>\n

H Series Simplex – Single Strand (suffix -1)<\/h2>\n

Kraftig plattgeometri. Samma stigning som motsvarande i ANSI A-serien. Tjockare plattor och st\u00f6rre stift ger h\u00f6gre dragh\u00e5llfasthet och utmattningsbest\u00e4ndighet vid st\u00f6tbelastning. Kedjor markerade med * \u00e4r busskedjor.<\/p>\n

\"drivkedjans<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI-nr.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nT-max<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
EP-*35H-1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n13.3<\/td>\n14.3<\/td>\n9.00<\/td>\n1.50<\/td>\n7.9\/1795<\/td>\n10.8<\/td>\n0.41<\/td>\n<\/tr>\n
40H-1<\/strong><\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.00<\/td>\n2.03<\/td>\n14.1\/3205<\/td>\n19.1<\/td>\n0.82<\/td>\n<\/tr>\n
50H-1<\/strong><\/td>\n15.875<\/td>\n10.16<\/td>\n9.40<\/td>\n5.08<\/td>\n22.1<\/td>\n23.4<\/td>\n15.09<\/td>\n2.42<\/td>\n22.2\/5045<\/td>\n30.2<\/td>\n1.25<\/td>\n<\/tr>\n
60H-1<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.00<\/td>\n3.25<\/td>\n31.8\/7227<\/td>\n42.7<\/td>\n1.87<\/td>\n<\/tr>\n
80H-1<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n36.2<\/td>\n37.7<\/td>\n24.00<\/td>\n4.00<\/td>\n56.7\/12886<\/td>\n71.4<\/td>\n3.10<\/td>\n<\/tr>\n
100H-1<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n43.6<\/td>\n46.9<\/td>\n30.00<\/td>\n4.80<\/td>\n88.5\/20114<\/td>\n112.4<\/td>\n4.52<\/td>\n<\/tr>\n
120H-1<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n53.5<\/td>\n57.5<\/td>\n35.70<\/td>\n5.60<\/td>\n127.0\/28864<\/td>\n160.9<\/td>\n6.60<\/td>\n<\/tr>\n
140H-1<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n57.6<\/td>\n62.2<\/td>\n41.00<\/td>\n6.40<\/td>\n172.4\/39182<\/td>\n217.3<\/td>\n8.30<\/td>\n<\/tr>\n
160H-1<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n68.2<\/td>\n73.0<\/td>\n47.80<\/td>\n7.20<\/td>\n226.8\/51545<\/td>\n285.8<\/td>\n10.30<\/td>\n<\/tr>\n
180H-1<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n75.9<\/td>\n81.6<\/td>\n53.60<\/td>\n8.00<\/td>\n281.0\/63863<\/td>\n341.8<\/td>\n14.83<\/td>\n<\/tr>\n
200H-1<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n86.6<\/td>\n93.5<\/td>\n60.00<\/td>\n9.50<\/td>\n353.8\/80409<\/td>\n444.5<\/td>\n19.16<\/td>\n<\/tr>\n
240H-1<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n109.6<\/td>\n115.9<\/td>\n72.30<\/td>\n12.70<\/td>\n510.3\/115977<\/td>\n622.5<\/td>\n30.40<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Duplex – Two Strand (suffix -2)<\/h2>\n

Kraftiga duplexkedjor f\u00f6rdubblar lastkapaciteten vid samma stigning. Pt = tv\u00e4rg\u00e5ende stigning mellan tr\u00e5darnas mittpunkter. Finns i stigningsstorlekar fr\u00e5n 60H till 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI-nr.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nT-max<\/th>\nPt (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
60H-2<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n55.3<\/td>\n57.1<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n63.6\/14455<\/td>\n84.5<\/td>\n3.71<\/td>\n<\/tr>\n
80H-2<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n68.8<\/td>\n70.3<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n113.4\/25773<\/td>\n145.3<\/td>\n6.15<\/td>\n<\/tr>\n
100H-2<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n82.7<\/td>\n86.0<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n177.0\/40227<\/td>\n225.9<\/td>\n9.03<\/td>\n<\/tr>\n
120H-2<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n102.4<\/td>\n106.4<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n254.0\/57727<\/td>\n322.7<\/td>\n13.13<\/td>\n<\/tr>\n
140H-2<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n109.8<\/td>\n114.4<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n344.8\/78364<\/td>\n437.7<\/td>\n16.60<\/td>\n<\/tr>\n
160H-2<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n130.1<\/td>\n134.9<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n453.6\/103091<\/td>\n571.6<\/td>\n20.20<\/td>\n<\/tr>\n
180H-2<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n146.5<\/td>\n155.6<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n562\/127726<\/td>\n680.0<\/td>\n29.20<\/td>\n<\/tr>\n
200H-2<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n164.9<\/td>\n171.8<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n707.6\/160818<\/td>\n894.9<\/td>\n38.11<\/td>\n<\/tr>\n
240H-2<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n212.6<\/td>\n223.1<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1000\/227270<\/td>\n1200.0<\/td>\n60.50<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Triplex – Three Strand (suffix -3)<\/h2>\n

Kraftiga triplexkedjor med trippel belastningskapacitet. Pt appliceras mellan varje intilliggande tr\u00e5dpar. Finns i stigning 60H till 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI-nr.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nT-max<\/th>\nPt (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
60H-3<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n81.4<\/td>\n83.2<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n95.4\/21682<\/td>\n113.9<\/td>\n5.54<\/td>\n<\/tr>\n
80H-3<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n101.4<\/td>\n102.9<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n170.1\/38659<\/td>\n203.5<\/td>\n9.42<\/td>\n<\/tr>\n
100H-3<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n121.8<\/td>\n125.1<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n265.5\/60341<\/td>\n314.8<\/td>\n12.96<\/td>\n<\/tr>\n
120H-3<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n151.2<\/td>\n155.2<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n381.0\/86591<\/td>\n444.7<\/td>\n19.64<\/td>\n<\/tr>\n
140H-3<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n162.0<\/td>\n166.6<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n517.2\/117545<\/td>\n598.4<\/td>\n24.90<\/td>\n<\/tr>\n
160H-3<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n192.0<\/td>\n196.8<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n680.4\/154636<\/td>\n787.3<\/td>\n30.10<\/td>\n<\/tr>\n
180H-3<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n215.7<\/td>\n224.8<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n843\/191589<\/td>\n1011.0<\/td>\n44.10<\/td>\n<\/tr>\n
200H-3<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n243.2<\/td>\n250.1<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n1061.4\/241227<\/td>\n1228.2<\/td>\n57.06<\/td>\n<\/tr>\n
240H-3<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n313.8<\/td>\n324.3<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1500\/340905<\/td>\n1650.0<\/td>\n91.00<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Icke-standardiserade kraftiga kedjor (BH\/BHF-serien)<\/h2>\n

Icke-standardiserade kraftiga kedjor tillverkade med EP-kedjenumrering f\u00f6r specifika OEM-applikationer. Inkluderar raka sidoplattvarianter (m\u00e4rkta F), fl\u00e4nsade plattvarianter och kombinationsdesigner. * betecknar bussningskedja; d1 f\u00f6r dessa \u00e4r bussningens ytterdiameter. F betecknar raka (platta) sidoplattor.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
EP-kedja nr.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nt\/T<\/th>\nQ min (kN\/lbf)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
EP-04BH<\/td>\n6.000<\/td>\n4.00<\/td>\n2.80<\/td>\n1.85<\/td>\n8.4<\/td>\n9.4<\/td>\n5.0<\/td>\n0.90<\/td>\n5.00\/1136<\/td>\n0.14<\/td>\n<\/tr>\n
EP-*06BH<\/td>\n9.525<\/td>\n6.35<\/td>\n5.72<\/td>\n3.28<\/td>\n14.4<\/td>\n15.4<\/td>\n8.2<\/td>\n1.60<\/td>\n11.25\/2557<\/td>\n0.51<\/td>\n<\/tr>\n
*35HF1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n14.6<\/td>\n15.6<\/td>\n9.0<\/td>\n1.80<\/td>\n9.00\/2023<\/td>\n0.47<\/td>\n<\/tr>\n
EP-08AHF1<\/td>\n12.700<\/td>\n7.95<\/td>\n10.00<\/td>\n3.96<\/td>\n21.0<\/td>\n22.2<\/td>\n12.0<\/td>\n2.03<\/td>\n13.80\/3136<\/td>\n0.88<\/td>\n<\/tr>\n
EP-08BH<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n18.8<\/td>\n19.9<\/td>\n11.8<\/td>\n2.03<\/td>\n20.60\/4682<\/td>\n0.79<\/td>\n<\/tr>\n
41HF1<\/td>\n12.700<\/td>\n7.77<\/td>\n6.25<\/td>\n3.58<\/td>\n16.7<\/td>\n18.0<\/td>\n9.9<\/td>\n2.03<\/td>\n9.00\/2023<\/td>\n0.59<\/td>\n<\/tr>\n
EP-*C40HF3<\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.0<\/td>\n2.03<\/td>\n20.00\/4496<\/td>\n0.94<\/td>\n<\/tr>\n
EP-*C08BHF8<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n19.9<\/td>\n21.0<\/td>\n11.8<\/td>\n2.42\/2.03<\/td>\n25.00\/5620<\/td>\n1.04<\/td>\n<\/tr>\n
EP-10BH<\/td>\n15.875<\/td>\n10.16<\/td>\n9.65<\/td>\n5.08<\/td>\n20.2<\/td>\n21.6<\/td>\n14.7<\/td>\n1.85<\/td>\n25.00\/5681<\/td>\n1.03<\/td>\n<\/tr>\n
EP-10BHF1<\/td>\n15.875<\/td>\n10.16<\/td>\n6.45<\/td>\n5.08<\/td>\n18.0<\/td>\n19.8<\/td>\n14.7<\/td>\n2.10<\/td>\n23.60\/5305<\/td>\n1.05<\/td>\n<\/tr>\n
EP-12BH<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.2<\/td>\n26.8<\/td>\n16.0<\/td>\n2.42<\/td>\n40.00\/9091<\/td>\n1.45<\/td>\n<\/tr>\n
EP-12BHF1<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.0<\/td>\n27.2<\/td>\n16.5<\/td>\n2.50<\/td>\n44.00\/10000<\/td>\n1.46<\/td>\n<\/tr>\n
EP-12BHF2<\/td>\n19.050<\/td>\n12.07<\/td>\n13.30<\/td>\n6.10<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.72<\/td>\n<\/tr>\n
EP-12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n13.50<\/td>\n5.72<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.71<\/td>\n<\/tr>\n
EP-12BV<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n24.5<\/td>\n26.5<\/td>\n16.0<\/td>\n2.42<\/td>\n36.00\/8182<\/td>\n1.43<\/td>\n<\/tr>\n
EP-60HV<\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.0<\/td>\n3.25<\/td>\n40.00\/9090<\/td>\n2.00<\/td>\n<\/tr>\n
EP-12AHF7<\/td>\n19.050<\/td>\n11.91<\/td>\n9.50<\/td>\n5.94<\/td>\n25.9<\/td>\n27.7<\/td>\n18.0<\/td>\n3.25<\/td>\n49.00\/11015<\/td>\n1.78<\/td>\n<\/tr>\n
EP-12AHF101<\/td>\n19.050<\/td>\n11.91<\/td>\n9.40<\/td>\n5.94<\/td>\n26.3<\/td>\n28.1<\/td>\n18.0<\/td>\n3.25<\/td>\n53.00\/11914<\/td>\n1.81<\/td>\n<\/tr>\n
EP-12BHF5<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n6.10<\/td>\n25.2<\/td>\n26.8<\/td>\n17.9<\/td>\n2.42<\/td>\n40.00\/8992<\/td>\n1.60<\/td>\n<\/tr>\n
EP-*C12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.72<\/td>\n29.3<\/td>\n31.2<\/td>\n20.0<\/td>\n4.00\/3.00<\/td>\n31.40\/7059<\/td>\n2.38<\/td>\n<\/tr>\n
EP-16BH<\/td>\n25.400<\/td>\n15.88<\/td>\n17.02<\/td>\n8.90<\/td>\n35.7<\/td>\n38.9<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n3.11<\/td>\n<\/tr>\n
EP-16BHF3<\/td>\n25.400<\/td>\n15.88<\/td>\n12.70<\/td>\n8.90<\/td>\n31.6<\/td>\n35.0<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n2.90<\/td>\n<\/tr>\n
EP-*C20AHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.05<\/td>\n10.32<\/td>\n43.6<\/td>\n46.9<\/td>\n30.0<\/td>\n6.00\/4.80<\/td>\n146.00\/32821<\/td>\n5.40<\/td>\n<\/tr>\n
EP-20BH<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n26.4<\/td>\n6.00\/4.80<\/td>\n95.00\/21356<\/td>\n4.52<\/td>\n<\/tr>\n
EP-20BHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n29.2<\/td>\n6.00\/4.80<\/td>\n100.00\/33720<\/td>\n5.09<\/td>\n<\/tr>\n
EP-24BH<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n58.6<\/td>\n63.4<\/td>\n36.2<\/td>\n7.50\/6.00<\/td>\n225.00\/51136<\/td>\n9.00<\/td>\n<\/tr>\n
EP-24BHF2<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n57.8<\/td>\n62.2<\/td>\n37.0<\/td>\n7.20\/6.00<\/td>\n225.40\/51226<\/td>\n9.06<\/td>\n<\/tr>\n
EP-24BHF5<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n64.6<\/td>\n69.1<\/td>\n36.2<\/td>\n9.00\/7.50<\/td>\n270.00\/61344<\/td>\n10.60<\/td>\n<\/tr>\n
EP-28BH<\/td>\n44.450<\/td>\n27.94<\/td>\n30.99<\/td>\n15.90<\/td>\n69.6<\/td>\n75.0<\/td>\n36.7<\/td>\n8.50\/7.20<\/td>\n200.00\/44960<\/td>\n9.99<\/td>\n<\/tr>\n
EP-32AHF1<\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n15.90<\/td>\n75.4<\/td>\n80.3<\/td>\n47.8<\/td>\n9.00<\/td>\n222.40\/49996<\/td>\n13.36<\/td>\n<\/tr>\n
EP-32BH<\/td>\n50.800<\/td>\n29.21<\/td>\n30.99<\/td>\n17.81<\/td>\n72.0<\/td>\n77.2<\/td>\n42.0<\/td>\n8.00<\/td>\n250.00\/56200<\/td>\n11.26<\/td>\n<\/tr>\n
EP-32BHF1<\/td>\n50.800<\/td>\n29.21<\/td>\n31.55<\/td>\n17.81<\/td>\n69.9<\/td>\n74.7<\/td>\n48.2<\/td>\n8.00\/7.15<\/td>\n350.00\/78680<\/td>\n13.20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

\"\"<\/p>\n

\n

N\u00e4r man ska v\u00e4lja Heavy Duty-serien framf\u00f6r standard A-serien<\/h2>\n
\n
\n

Frekventa start-stopp under belastning<\/h3>\n

Varje stopp-start-cykel introducerar en dragst\u00f6tpuls i kedjan n\u00e4r den slaka sidan pl\u00f6tsligt dras \u00e5t. De tjockare plattorna i H-serien har en h\u00f6gre tv\u00e4rsnittsarea och d\u00e4rmed en h\u00f6gre utmattningsgr\u00e4ns vid upprepade dragcykler. Applikationer som startar och stoppar mer \u00e4n 20 g\u00e5nger per timme under belastning b\u00f6r specificera H-serien som ett minimum.<\/p>\n<\/div>\n

\n

P\u00e5verkan fr\u00e5n kopplade maskiner<\/h3>\n

Kolvpressar, stanspressar, k\u00e4ftkrossar och r\u00f6rfr\u00e4sar genererar alla skarpa st\u00f6tpulser genom sina drivkedjor. Servicefaktorn f\u00f6r s\u00e5dana applikationer n\u00e5r vanligtvis 1,5 till 2,0 p\u00e5 standard A-serien, vilket g\u00f6r H-serien till det r\u00e4tta valet utan att kr\u00e4va en \u00f6verg\u00e5ng till en st\u00f6rre stigning eller fler tr\u00e5dar.<\/p>\n<\/div>\n

\n

Tunga jordbruksdrivna enheter<\/h3>\n

Huvuddrev f\u00f6r sk\u00f6rdetr\u00f6skor, halmskakare och tr\u00f6skverk kombinerar alla h\u00f6ga intermittenta belastningar med st\u00f6tar fr\u00e5n gr\u00f6da. H-serien specificeras i stor utstr\u00e4ckning som OEM-utrustning f\u00f6r dessa drev eftersom de tjockare plattorna f\u00f6rl\u00e4nger livsl\u00e4ngden i f\u00e4ltf\u00f6rh\u00e5llanden d\u00e4r kedjebyte \u00e4r dyrt och obekv\u00e4mt.<\/p>\n<\/div>\n

\n

Milj\u00f6 med h\u00f6g vibration<\/h3>\n

Vibrerande siktar, vibrerande matare, vibrerande transport\u00f6rer och krossar \u00f6verf\u00f6r alla h\u00f6gfrekventa vibrationer till drivkedjan genom kedjehjulet och axeln. Utmattningssprickor i l\u00e4nkplattor b\u00f6rjar l\u00e4ttast vid kanten av stifth\u00e5let under alternerande sp\u00e4nning. H-seriens tjockare platta f\u00f6rdelar denna sp\u00e4nning \u00f6ver ett st\u00f6rre omr\u00e5de och motverkar sprickbildning.<\/p>\n<\/div>\n

\n

Samma kedjehjul, h\u00f6gre kapacitet<\/h3>\n

H-serien anv\u00e4nder samma stigning som motsvarande A-serie, s\u00e5 den passar samma kedjehjul utan n\u00e5gon modifiering av drivlayouten. D\u00e4r en standardkedja i A-serien har visat sig ha otillr\u00e4cklig livsl\u00e4ngd kr\u00e4ver en uppgradering till H-serien endast ett kedjebyte, inte en omkonstruktion av kedjehjulets centrum, axlar eller skydd.<\/p>\n<\/div>\n

\n

Icke-standardiserade OEM-krav<\/h3>\n

BH- och BHF-serierna, som inte \u00e4r standard, tillverkas f\u00f6r OEM-ers\u00e4ttning d\u00e4r maskinen ursprungligen konstruerades enligt en egenutvecklad kedjespecifikation som inte t\u00e4cks av standard H-serien. Raka sidopl\u00e5tar (BHF), fl\u00e4nsade plattor, bredare innerbredder eller kombinerade rull- och bussningspositioner finns tillg\u00e4ngliga. Bifoga en provkedja eller ritning f\u00f6r offert.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Applikationer<\/h2>\n
\n
\n

Jordbruksmaskiner<\/h3>\n

EP 40H till 100H simplexkedjor \u00e4r standardspecifikationen f\u00f6r sk\u00f6rdetr\u00f6skors huvuddrev, halmskakardrev och spannm\u00e5lsskruvdrev. 40H-1 \u00e4r den enskilt mest anv\u00e4nda tunga kedjan i jordbruksmaskiner v\u00e4rlden \u00f6ver. Den h\u00f6gre plattjockleken absorberar st\u00f6tbelastningen fr\u00e5n gr\u00f6da som intar och fr\u00e5n stenar som kommer in i matningsmekanismen, vilket ger en livsl\u00e4ngd p\u00e5 cirka 40% l\u00e4ngre \u00e4n motsvarande standardkedja 40 under samma f\u00f6rh\u00e5llanden.<\/p>\n<\/div>\n

\n

Press- och stansdrivare<\/h3>\n

Mekaniska pressar, stanspressar och stansmaskiner \u00f6verf\u00f6r en skarp st\u00f6tpuls genom drivkedjan i \u00f6gonblicket f\u00f6r stanskontakt och stansgenombrott. EP 80H-1, 100H-1 och 120H-1 simplex- och duplexkedjor specificeras vanligtvis f\u00f6r presshuvuddrivningar och sv\u00e4nghjulsdrivningar. Den tyngre plattsektionen motst\u00e5r utmattningssprickbildning som annars skulle utvecklas vid stifth\u00e5lets kant under upprepade belastningscykler med h\u00f6g amplitud.<\/p>\n<\/div>\n

\n

Gruvdrift och stenbrott<\/h3>\n

EP 120H till 240H-kedjor f\u00f6r drivkedjor f\u00f6r prim\u00e4rkrossar, vibrerande siktar och matarkedjor f\u00f6r plattor i gruv- och stenbrottsanl\u00e4ggningar. Duplex 120H-2 och 160H-2 \u00e4r standardstorleksintervallet f\u00f6r huvuddrivningar f\u00f6r k\u00e4ftkrossar. H-serien \u00e4r ocks\u00e5 specificerad f\u00f6r drivningar i kolberedning, d\u00e4r vatten och koldamm f\u00f6rorenar sm\u00f6rjmedlet och drivningen arbetar under variabel belastning fr\u00e5n fluktuationer i kolmatningshastigheten.<\/p>\n<\/div>\n

\n

Sockerindustrin<\/h3>\n

Sugar mill main drives and cane elevator drives use EP heavy duty chains in the 100H to 200H range. The juice environment is highly corrosive to steel chain, and the cane ingestion load is unpredictable – a stone or dense root clump entering the mill can momentarily spike the load to several times the rated running load. The H series provides the combination of corrosion resistance (through correct lubrication specification) and fatigue strength required for these demanding tropical mill conditions.<\/p>\n<\/div>\n<\/div>\n

\"Kvalitetstestning<\/p>\n

Matchande kedjehjul och andra kedjetyper<\/h2>\n
\n
\n

\"Ever-Power<\/p>\n

Matchande kedjehjul f\u00f6r alla EP-kedjestorlekar finns tillg\u00e4ngliga via v\u00e5r partnerwebbplats. sprocket-chain.net<\/a>Alla ANSI B29.1- och ISO 606-tandformer, simplex till 8-tr\u00e5dig, C45 kolst\u00e5l och legerat st\u00e5l, pilotborrning och nav med f\u00e4rdigt borrning.<\/p>\n

Visa matchande kedjehjul \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

\n

Andra kedjor<\/h3>\n
\n
\n

\"Korea<\/p>\n

Rostfria st\u00e5lkedjor<\/a><\/h3>\n

Rullkedjor i SUS304 och SUS316L f\u00f6r livsmedel, l\u00e4kemedel och korrosiva milj\u00f6er.<\/p>\n

Visa intervall<\/a><\/p>\n<\/div>\n

\n

\"Korea<\/p>\n

Jordbrukskedjor<\/a><\/h3>\n

CA-, CC- och S-serien f\u00f6r sk\u00f6rdetr\u00f6skor, balpressar och maskiner f\u00f6r gr\u00f6dhantering. ISO 487-standard.<\/p>\n

Visa intervall<\/a><\/p>\n<\/div>\n

\n

\"Korea<\/p>\n

Tekniska kedjor<\/a><\/h3>\n

WH-svetsade st\u00e5l-, gjutna och runda l\u00e4nkkedjor f\u00f6r cement, gruvdrift och transport av tunga anl\u00e4ggningar.<\/p>\n

Visa intervall<\/a><\/p>\n<\/div>\n<\/div>\n

\"\"<\/div>\n<\/div>\n

Vanliga fr\u00e5gor<\/h2>\n
\n
\nVad \u00e4r skillnaden mellan H-serien och standard A-serien vid samma tonh\u00f6jd?<\/summary>\n
The H series uses thicker link plates than the standard A series at the same pitch. For example, a standard 60 (08A) chain has a plate thickness of 2.42 mm; the 60H chain has a plate thickness of 3.25 mm – approximately 34% thicker. The larger plate cross-section gives a higher minimum tensile strength (31.8 kN versus about 31.8 kN for the standard – the gain is primarily in fatigue life and plate thickness rather than tensile strength at the smaller sizes, becoming more pronounced at 80 and above where the H series clearly outperforms the standard chain). The pin diameter and roller diameter remain the same, so H series chains run on standard pitch sprockets without any modification.<\/div>\n<\/details>\n
\nKan jag anv\u00e4nda H-seriekedjor p\u00e5 mina befintliga A-seriedrev?<\/summary>\n
Ja, H-seriens kedjor k\u00f6rs p\u00e5 standard ANSI A-seriens kedjehjul utan n\u00e5gra modifieringar. Stigningen, rulldiametern och innerbredden p\u00e5 H-serien matchar A-seriens motsvarigheter med samma kedjenummer. Den enda dimensionen som skiljer sig \u00e4r plattjockleken, och detta har ingen effekt p\u00e5 kedjehjulets ingrepp eftersom kedjehjulets kuggform griper in i rullen och de inre plattorna snarare \u00e4n de yttre plattorna. De tjockare yttre plattorna sticker helt enkelt ut n\u00e5got l\u00e4ngre f\u00f6rbi kedjehjulets kugg, vilket ligger inom det normala konstruktionsavst\u00e5ndet.<\/div>\n<\/details>\n
\nVad betyder suffixkoderna p\u00e5 BH-seriekedjor (BH, BHF1, BHF2, etc.)?<\/summary>\n
The BH designation identifies these as heavy duty variants of the ISO B series roller chain geometry, produced by Ever-Power for specific OEM applications. The F in BHF stands for flat side plate (also called straight side plate) – a plate shape where the inner and outer plates are the same rectangular profile rather than the usual waisted figure-eight shape used in standard roller chains. The number after F identifies the specific plate profile variant (F1, F2, F3, F5 etc. are different proprietary plate dimensions used by different OEM machine manufacturers). The V suffix (as in 12BV or 60HV) identifies a chain with a specific plate profile used in high-speed applications. When ordering BH or BHF chains as replacements, always provide the complete EP chain number from the specification table and verify against a sample of the original chain.<\/div>\n<\/details>\n
\nSkiljer sig sm\u00f6rjningen f\u00f6r H-serien j\u00e4mf\u00f6rt med standardkedjor?<\/summary>\n
The lubrication requirements for H series chains are the same as for standard A series chains at the same pitch and speed – mineral oil applied at the pin-bush joint by drip oiler, bath, or spray system depending on chain speed. The lubrication method does not need to change when upgrading from A series to H series. What does sometimes change is the lubrication interval in severe applications: because the H series is typically specified for shock-loaded drives with more demanding duty cycles, more frequent oil replenishment may be required to maintain the oil film under high joint-load conditions. For drives with service factors above 1.5, consider a continuous drip oiler even at speeds below 1 m\/s.<\/div>\n<\/details>\n
\nVilka f\u00f6rbindningsl\u00e4nkar anv\u00e4nds f\u00f6r H-seriens kedjor?<\/summary>\n
H-seriens kedjor anv\u00e4nder saxsprintl\u00e4nkar (delade stift) snarare \u00e4n fj\u00e4derkl\u00e4mmor, vilket \u00e5terspeglar den h\u00f6gre belastningen p\u00e5 ledarna vid tunga applikationer. Saxsprintkopplingen \u00e4r s\u00e4krare vid st\u00f6tbelastning \u00e4n fj\u00e4derkl\u00e4mman, som kan lossna om kedjan vibrerar kraftigt. F\u00f6r kedjor 40H till 60H \u00e4r en tv\u00e5sprintig kopplingsl\u00e4nk standard. F\u00f6r 80H och upp\u00e5t finns en bultad kopplingsl\u00e4nk med sexkantsbultar och l\u00e5smuttrar tillg\u00e4nglig som ett alternativ till saxsprinten f\u00f6r applikationer d\u00e4r kopplingsl\u00e4nken m\u00e5ste tas bort och monteras tillbaka ofta. Byt alltid ut kopplingsl\u00e4nken vid varje kedjebyte oavsett dess synliga skick.<\/div>\n<\/details>\n
\nKan ni leverera icke-standardiserade BH- och BHF-kedjor som ers\u00e4ttning f\u00f6r befintliga maskiner?<\/summary>\n
Ja. BH- och BHF-serien \u00e4r specifikt avsedd som OEM-ers\u00e4ttning f\u00f6r maskiner som anv\u00e4nder kedjespecifikationer som inte \u00e4r standard. Om ditt kedjenummer visas i BH- eller BHF-tabellen ovan, ange EP-kedjenummer, antal i meter eller l\u00e4nkantal och om en f\u00f6rbindande l\u00e4nk beh\u00f6vs. Om din kedja inte visas i tabellen, skicka ett prov p\u00e5 minst 5 f\u00f6rbundna l\u00e4nkar f\u00f6r dimensionsm\u00e4tning s\u00e5 identifierar EP den som matchar b\u00e4st eller producerar en anpassad kedja enligt dina provdimensioner med en minsta orderkvantitet p\u00e5 10 meter. F\u00f6r br\u00e5dskande byten, ange: stigning (m\u00e4tt \u00f6ver 10 p\u00e5 varandra f\u00f6ljande stiftcentrum, dividerat med 10), rulldiameter eller bussningens ytterdiameter, innerbredd mellan plattorna, stiftdiameter och platttjocklek. Fotografier fr\u00e5n b\u00e5de yta och kant \u00e4r ocks\u00e5 anv\u00e4ndbara f\u00f6r att identifiera plattprofiltypen.<\/div>\n<\/details>\n<\/div>\n

Vad v\u00e5ra kunder s\u00e4ger<\/h2>\n
\n
\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We upgraded our combine harvester main drive from standard 80 chain to EP 80H-1. The previous standard chains were needing replacement every harvest season. The 80H chains have now run for three full harvests with elongation at 1.6% – well within the 3% replacement threshold. The cost per season is significantly lower even though the EP 80H chain has a higher purchase price.”<\/p>\n

BK, flottingenj\u00f6r<\/strong>
\nUkraine – Large Grain Farm<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our jaw crusher main drive uses 120H-2 duplex chains. We had a history of fatigue plate fractures with previous supplier chains approximately every 8 months. EP 120H-2 chains have been running for 19 months without any plate fracture or connecting link failure. The improvement is directly attributable to the consistent plate hardness across the batch – no soft spots.”<\/p>\n

AO, underh\u00e5llschef<\/strong>
\nSouth Africa – Aggregate Quarry<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We needed a 12BHF2 non-standard chain to replace the original OEM specification on our packaging machine elevator drive. EP confirmed the chain from our EP chain number, delivered 5 complete circuit lengths cut and fitted with connecting links within 9 working days. The chains matched the original dimensions exactly and fitted without adjustment.”<\/p>\n

PW, teknisk chef<\/strong>
\nGermany – Food Packaging Plant<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our sugar mill drive specifies 160H-1 simplex chains for the cane elevator. The EP chains have been running through two grinding seasons in a highly corrosive juice environment with correct lubrication. Service life has exceeded our planned replacement interval and our maintenance team now standardises on EP H series across all mill drives.”<\/p>\n

RF, chefsingenj\u00f6r<\/strong>
\nThailand – Sugar Mill<\/p>\n<\/div>\n<\/div>\n

\n
\n

Beg\u00e4r offert f\u00f6r EP-rullkedjor f\u00f6r kraftiga bel\u00e4ggningar<\/h3>\n

Ange kedjebeteckningen (H-seriens ANSI-nummer med tr\u00e5dsuffix, eller EP-BH\/BHF-kedjenummer), antal i meter eller l\u00e4nkantal, och om specifikation f\u00f6r f\u00e4ste eller f\u00f6rbindningsl\u00e4nk beh\u00f6vs. F\u00f6r icke-standardiserade BH\/BHF-kedjor r\u00e4cker EP-kedjenumret fr\u00e5n tabellen ovan eller ett m\u00e5ttprov f\u00f6r offert. V\u00e5rt team svarar inom en arbetsdag.<\/p>\n

F\u00e5 en offert nu<\/a>
\nAlla produkter inom drivkedjor<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

H-seriens kraftiga kedjor, icke-standardiserade kraftiga kedjor, simplex, duplex och triplex. Tjockare plattor och st\u00f6rre stift \u00e4n standard A-serien vid samma stigning. Stigning 9,525 mm till 76,2 mm. Ever-Power kraftiga serier *35H till 240H plus BH\/BHF icke-standardiserade sortiment.<\/p>","protected":false},"featured_media":122,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-206","product","type-product","status-publish","has-post-thumbnail","product_cat-driving-chains","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/5speedtransmission.com\/sv\/wp-json\/wp\/v2\/product\/206","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/5speedtransmission.com\/sv\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/5speedtransmission.com\/sv\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/sv\/wp-json\/wp\/v2\/comments?post=206"}],"wp:attachment":[{"href":"https:\/\/5speedtransmission.com\/sv\/wp-json\/wp\/v2\/media?parent=206"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/5speedtransmission.com\/sv\/wp-json\/wp\/v2\/product_brand?post=206"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/5speedtransmission.com\/sv\/wp-json\/wp\/v2\/product_cat?post=206"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/5speedtransmission.com\/sv\/wp-json\/wp\/v2\/product_tag?post=206"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}