{"id":206,"date":"2026-07-24T06:13:54","date_gmt":"2026-07-24T06:13:54","guid":{"rendered":"https:\/\/5speedtransmission.com\/?post_type=product&p=206"},"modified":"2026-07-24T06:13:54","modified_gmt":"2026-07-24T06:13:54","slug":"heavy-duty-series-roller-chains","status":"publish","type":"product","link":"https:\/\/5speedtransmission.com\/sk\/produkt\/heavy-duty-series-roller-chains\/","title":{"rendered":"Val\u010dekov\u00e9 re\u0165aze pre vysok\u00e9 za\u0165a\u017eenie"},"content":{"rendered":"
\n
\n
\n

S\u00e9ria H<\/p>\n

a BH \/ BHF ne\u0161tandardn\u00e9<\/p>\n<\/div>\n

\n

9,525 a\u017e 76,2 mm<\/p>\n

Rozsah t\u00f3nu<\/p>\n<\/div>\n

\n

Do 1 650 kN<\/p>\n

Triplexn\u00e9 medzn\u00e9 za\u0165a\u017eenie<\/p>\n<\/div>\n

\n

ISO 9001<\/p>\n

Certifikovan\u00e1 kvalita<\/p>\n<\/div>\n<\/div>\n

Heavy Duty Roller Chain – Product Overview<\/h2>\n
\n
\n

K\u00f3rea Ever-Power \u0165a\u017ek\u00fdch s\u00e9ri\u00ed val\u010dekov\u00fdch re\u0165az\u00ed<\/a> are an uprated variant of the standard short pitch roller chain range, designed for applications where the operating load, shock loading severity, or duty cycle exceeds what the standard A series can comfortably handle at the same pitch. The heavy duty designation refers to thicker link plates – typically 25% to 40% heavier than the standard A series plate at the same pitch – combined with larger diameter pins and in some sizes an increased inner width, all while maintaining the same pitch so that the chain can run on standard pitch sprockets without any modification to the sprocket or drive configuration.<\/p>\n

Rad EP H pokr\u00fdva re\u0165aze ve\u013ekosti *35H a\u017e 240H v simplexn\u00fdch (jednovl\u00e1knov\u00fdch, pr\u00edpona -1), duplexn\u00fdch (dvojvl\u00e1knov\u00fdch, pr\u00edpona -2) a triplexn\u00fdch (trojvl\u00e1knov\u00fdch, pr\u00edpona -3) konfigur\u00e1ci\u00e1ch. Pr\u00edpona H je \u0161tandardn\u00e9 ozna\u010denie pre geometriu dosiek pre vysok\u00e9 za\u0165a\u017eenie: re\u0165az 35H m\u00e1 rovnak\u00fd rozstup 9,525 mm a rovnak\u00fd priemer val\u010dekov ako \u0161tandardn\u00e1 re\u0165az 35, ale \u010dl\u00e1nkov\u00e9 dosky s\u00fa hrub\u0161ie, \u010do jej dod\u00e1va vy\u0161\u0161iu pevnos\u0165 v \u0165ahu a dlh\u0161iu \u00fanavov\u00fa \u017eivotnos\u0165 pri opakovanom za\u0165a\u017een\u00ed. To je d\u00f4le\u017eit\u00e9 v aplik\u00e1ci\u00e1ch, ako s\u00fa hlavn\u00e9 pohony po\u013enohospod\u00e1rskych kombajnov, pohony zdv\u00edhac\u00edch plo\u0161in, hlavn\u00e9 pohony baliacich strojov a v\u0161eobecn\u00e9 priemyseln\u00e9 pohony, ktor\u00e9 sa sp\u00fa\u0161\u0165aj\u00fa a zastavuj\u00fa pod za\u0165a\u017een\u00edm, s\u00fa vystaven\u00e9 vibr\u00e1ci\u00e1m zo spriahnut\u00fdch strojov alebo musia zvl\u00e1da\u0165 r\u00e1zov\u00e9 \u0161pi\u010dky vznikaj\u00face pri n\u00e1hlom uvo\u013enen\u00ed re\u0165aze po\u010das sp\u00e4tn\u00e9ho za\u0165a\u017eenia.<\/p>\n

Beyond the standard H series, Korea Ever-Power manufactures a comprehensive range of non-standard heavy duty chains under the BH and BHF designations. These are chains developed for specific OEM applications where neither the standard A series nor the standard H series geometry exactly matches the sprocket tooth form or structural requirement of the original equipment. The BH range includes straight side plate variants (where the inner and outer plates are the same flat profile rather than the usual waisted figure-eight shape), flanged plate variants for guide track applications, and combination chains with mixed roller and bush positions for specific machine functions. Bush chains within both the H series and the BH range are marked with an asterisk (*) – for these chains the d1 dimension in the specification table refers to the external diameter of the bush rather than an outer roller diameter, because no separate outer roller is fitted.<\/p>\n

V\u00fdrobn\u00e1 linka na vysokov\u00fdkonn\u00e9 re\u0165aze Korea Ever-Power vyu\u017e\u00edva rovnak\u00e9 procesy tv\u00e1rnenia za studena a tepeln\u00e9ho spracovania ako s\u00e9ria A, s kalen\u00fdmi \u010dapmi z legovanej ocele, kalen\u00fdmi puzdrami a tepelne spracovan\u00fdmi doskami. \u0164a\u017e\u0161ie profily dosiek v s\u00e9rii H vy\u017eaduj\u00fa dlh\u0161ie cykly tepeln\u00e9ho spracovania na dosiahnutie jednotn\u00fdch vlastnost\u00ed jadra a v\u00e4\u010d\u0161ie priemery \u010dapov vy\u017eaduj\u00fa presnej\u0161iu rozmerov\u00fa kontrolu pri br\u00fasen\u00ed, aby sa zachovala spr\u00e1vna v\u00f4\u013ea medzi \u010dapom a puzdrom pre dobr\u00e9 udr\u017eanie mazacieho filmu. Pred meran\u00edm rozstupu sa na ka\u017ed\u00fa zmontovan\u00fa re\u0165az s\u00e9rie H aplikuje predp\u00e4tie, aby sa eliminovalo pred\u013a\u017eenie pri in\u0161tal\u00e1cii, rovnak\u00fdm sp\u00f4sobom ako v \u0161tandardnom rade s\u00e9rie A. Spojovacie \u010dl\u00e1nky v s\u00e9rii H pou\u017e\u00edvaj\u00fa z\u00e1vla\u010dku alebo z\u00e1vla\u010dku namiesto pru\u017einovej svorky pou\u017e\u00edvanej v \u013eah\u0161\u00edch \u0161tandardn\u00fdch re\u0165aziach, \u010do odr\u00e1\u017ea vy\u0161\u0161ie za\u0165a\u017eenie spoja v n\u00e1ro\u010dnej prev\u00e1dzke.<\/p>\n<\/div>\n

\"Val\u010dekov\u00e1<\/div>\n<\/div>\n
\n

K\u013e\u00fa\u010d k rozmerom:<\/strong> P = Rozstup | d1 = Maxim\u00e1lny priemer val\u010deka (puzdrov\u00e1 re\u0165az: vonkaj\u0161\u00ed priemer puzdra) | b1 = Minim\u00e1lna vn\u00fatorn\u00e1 \u0161\u00edrka medzi doskami | d2 = Maxim\u00e1lny priemer \u010dapu | L = Maxim\u00e1lna d\u013a\u017eka \u010dapu | Lc = Maxim\u00e1lna d\u013a\u017eka \u010dapu spojovacieho \u010dl\u00e1nku | h2 = Maxim\u00e1lna h\u013abka vn\u00fatornej dosky | T = Maxim\u00e1lna hr\u00fabka dosky | Pt = Prie\u010dny rozstup (duplex\/triplex) | Q = Minim\u00e1lna pevnos\u0165 v \u0165ahu kN\/lbf | Q0 = Priemern\u00e1 pevnos\u0165 v \u0165ahu kN | q = Hmotnos\u0165 kg\/m | * = Puzdrov\u00e1 re\u0165az | F = Rovn\u00e9 (ploch\u00e9) bo\u010dn\u00e9 dosky<\/p>\n<\/div>\n

H Series Simplex – Single Strand (suffix -1)<\/h2>\n

Geometria dosiek pre vysok\u00e9 za\u0165a\u017eenie. Rovnak\u00fd rozstup ako ekvivalent s\u00e9rie ANSI A. Hrub\u0161ie dosky a v\u00e4\u010d\u0161ie \u010dapy poskytuj\u00fa vy\u0161\u0161iu pevnos\u0165 v \u0165ahu a \u00fanavov\u00fa \u017eivotnos\u0165 pri r\u00e1zovom za\u0165a\u017een\u00ed. Re\u0165aze ozna\u010den\u00e9 * s\u00fa puzdrov\u00e9 re\u0165aze.<\/p>\n

\"rozmer-hnacej-re\u0165aze-1\"<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u010c\u00edslo ISO\/ANSI<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nMaxim\u00e1lna hodnota Lc<\/th>\nh2 max<\/th>\nT max<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
EP-*35H-1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n13.3<\/td>\n14.3<\/td>\n9.00<\/td>\n1.50<\/td>\n7.9\/1795<\/td>\n10.8<\/td>\n0.41<\/td>\n<\/tr>\n
40H-1<\/strong><\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.00<\/td>\n2.03<\/td>\n14.1\/3205<\/td>\n19.1<\/td>\n0.82<\/td>\n<\/tr>\n
50H-1<\/strong><\/td>\n15.875<\/td>\n10.16<\/td>\n9.40<\/td>\n5.08<\/td>\n22.1<\/td>\n23.4<\/td>\n15.09<\/td>\n2.42<\/td>\n22.2\/5045<\/td>\n30.2<\/td>\n1.25<\/td>\n<\/tr>\n
60H-1<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.00<\/td>\n3.25<\/td>\n31.8\/7227<\/td>\n42.7<\/td>\n1.87<\/td>\n<\/tr>\n
80H-1<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n36.2<\/td>\n37.7<\/td>\n24.00<\/td>\n4.00<\/td>\n56.7\/12886<\/td>\n71.4<\/td>\n3.10<\/td>\n<\/tr>\n
100H-1<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n43.6<\/td>\n46.9<\/td>\n30.00<\/td>\n4.80<\/td>\n88.5\/20114<\/td>\n112.4<\/td>\n4.52<\/td>\n<\/tr>\n
120H-1<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n53.5<\/td>\n57.5<\/td>\n35.70<\/td>\n5.60<\/td>\n127.0\/28864<\/td>\n160.9<\/td>\n6.60<\/td>\n<\/tr>\n
140H-1<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n57.6<\/td>\n62.2<\/td>\n41.00<\/td>\n6.40<\/td>\n172.4\/39182<\/td>\n217.3<\/td>\n8.30<\/td>\n<\/tr>\n
160H-1<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n68.2<\/td>\n73.0<\/td>\n47.80<\/td>\n7.20<\/td>\n226.8\/51545<\/td>\n285.8<\/td>\n10.30<\/td>\n<\/tr>\n
180H-1<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n75.9<\/td>\n81.6<\/td>\n53.60<\/td>\n8.00<\/td>\n281.0\/63863<\/td>\n341.8<\/td>\n14.83<\/td>\n<\/tr>\n
200H-1<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n86.6<\/td>\n93.5<\/td>\n60.00<\/td>\n9.50<\/td>\n353.8\/80409<\/td>\n444.5<\/td>\n19.16<\/td>\n<\/tr>\n
240H-1<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n109.6<\/td>\n115.9<\/td>\n72.30<\/td>\n12.70<\/td>\n510.3\/115977<\/td>\n622.5<\/td>\n30.40<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Duplex – Two Strand (suffix -2)<\/h2>\n

Duplexn\u00e9 re\u0165aze pre vysok\u00e9 za\u0165a\u017eenie zdvojn\u00e1sobuj\u00fa nosnos\u0165 pri rovnakom rozstupe. Pt = prie\u010dny rozstup medzi stredmi prame\u0148ov. Dostupn\u00e9 v rozstupoch od 60H do 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u010c\u00edslo ISO\/ANSI<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nMaxim\u00e1lna hodnota Lc<\/th>\nh2 max<\/th>\nT max<\/th>\nBod (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
60H-2<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n55.3<\/td>\n57.1<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n63.6\/14455<\/td>\n84.5<\/td>\n3.71<\/td>\n<\/tr>\n
80H-2<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n68.8<\/td>\n70.3<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n113.4\/25773<\/td>\n145.3<\/td>\n6.15<\/td>\n<\/tr>\n
100H-2<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n82.7<\/td>\n86.0<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n177.0\/40227<\/td>\n225.9<\/td>\n9.03<\/td>\n<\/tr>\n
120H-2<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n102.4<\/td>\n106.4<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n254.0\/57727<\/td>\n322.7<\/td>\n13.13<\/td>\n<\/tr>\n
140H-2<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n109.8<\/td>\n114.4<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n344.8\/78364<\/td>\n437.7<\/td>\n16.60<\/td>\n<\/tr>\n
160H-2<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n130.1<\/td>\n134.9<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n453.6\/103091<\/td>\n571.6<\/td>\n20.20<\/td>\n<\/tr>\n
180H-2<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n146.5<\/td>\n155.6<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n562\/127726<\/td>\n680.0<\/td>\n29.20<\/td>\n<\/tr>\n
200H-2<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n164.9<\/td>\n171.8<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n707.6\/160818<\/td>\n894.9<\/td>\n38.11<\/td>\n<\/tr>\n
240H-2<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n212.6<\/td>\n223.1<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1000\/227270<\/td>\n1200.0<\/td>\n60.50<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Triplex – Three Strand (suffix -3)<\/h2>\n

Vysokopevnostn\u00e9 triplexn\u00e9 re\u0165aze s trojn\u00e1sobnou nosnos\u0165ou. Pt sa aplikuje medzi ka\u017ed\u00fd susedn\u00fd p\u00e1r prame\u0148ov. Dostupn\u00e9 v rozstupoch od 60H do 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u010c\u00edslo ISO\/ANSI<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nMaxim\u00e1lna hodnota Lc<\/th>\nh2 max<\/th>\nT max<\/th>\nBod (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
60H-3<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n81.4<\/td>\n83.2<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n95.4\/21682<\/td>\n113.9<\/td>\n5.54<\/td>\n<\/tr>\n
80H-3<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n101.4<\/td>\n102.9<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n170.1\/38659<\/td>\n203.5<\/td>\n9.42<\/td>\n<\/tr>\n
100H-3<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n121.8<\/td>\n125.1<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n265.5\/60341<\/td>\n314.8<\/td>\n12.96<\/td>\n<\/tr>\n
120H-3<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n151.2<\/td>\n155.2<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n381.0\/86591<\/td>\n444.7<\/td>\n19.64<\/td>\n<\/tr>\n
140H-3<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n162.0<\/td>\n166.6<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n517.2\/117545<\/td>\n598.4<\/td>\n24.90<\/td>\n<\/tr>\n
160H-3<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n192.0<\/td>\n196.8<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n680.4\/154636<\/td>\n787.3<\/td>\n30.10<\/td>\n<\/tr>\n
180H-3<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n215.7<\/td>\n224.8<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n843\/191589<\/td>\n1011.0<\/td>\n44.10<\/td>\n<\/tr>\n
200H-3<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n243.2<\/td>\n250.1<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n1061.4\/241227<\/td>\n1228.2<\/td>\n57.06<\/td>\n<\/tr>\n
240H-3<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n313.8<\/td>\n324.3<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1500\/340905<\/td>\n1650.0<\/td>\n91.00<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Ne\u0161tandardn\u00e9 re\u0165aze pre vysok\u00e9 za\u0165a\u017eenie (s\u00e9ria BH \/ BHF)<\/h2>\n

Ne\u0161tandardn\u00e9 vysokov\u00fdkonn\u00e9 re\u0165aze vyr\u00e1ban\u00e9 pod\u013ea \u010d\u00edslovania re\u0165az\u00ed EP pre \u0161pecifick\u00e9 aplik\u00e1cie OEM. Zah\u0155\u0148a varianty s rovn\u00fdmi bo\u010dn\u00fdmi doskami (ozna\u010den\u00e9 F), varianty s pr\u00edrubov\u00fdmi doskami a kombinovan\u00e9 prevedenia. * ozna\u010duje re\u0165az s puzdrom; d1 pre tieto je vonkaj\u0161\u00ed priemer puzdra. F ozna\u010duje rovn\u00e9 (ploch\u00e9) bo\u010dn\u00e9 dosky.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u010c\u00edslo re\u0165azca EP<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nMaxim\u00e1lna hodnota Lc<\/th>\nh2 max<\/th>\nt\/T<\/th>\nQ min (kN\/lbf)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
EP-04BH<\/td>\n6.000<\/td>\n4.00<\/td>\n2.80<\/td>\n1.85<\/td>\n8.4<\/td>\n9.4<\/td>\n5.0<\/td>\n0.90<\/td>\n5.00\/1136<\/td>\n0.14<\/td>\n<\/tr>\n
EP-*06BH<\/td>\n9.525<\/td>\n6.35<\/td>\n5.72<\/td>\n3.28<\/td>\n14.4<\/td>\n15.4<\/td>\n8.2<\/td>\n1.60<\/td>\n11.25\/2557<\/td>\n0.51<\/td>\n<\/tr>\n
*35HF1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n14.6<\/td>\n15.6<\/td>\n9.0<\/td>\n1.80<\/td>\n9.00\/2023<\/td>\n0.47<\/td>\n<\/tr>\n
EP-08AHF1<\/td>\n12.700<\/td>\n7.95<\/td>\n10.00<\/td>\n3.96<\/td>\n21.0<\/td>\n22.2<\/td>\n12.0<\/td>\n2.03<\/td>\n13.80\/3136<\/td>\n0.88<\/td>\n<\/tr>\n
EP-08BH<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n18.8<\/td>\n19.9<\/td>\n11.8<\/td>\n2.03<\/td>\n20.60\/4682<\/td>\n0.79<\/td>\n<\/tr>\n
41HF1<\/td>\n12.700<\/td>\n7.77<\/td>\n6.25<\/td>\n3.58<\/td>\n16.7<\/td>\n18.0<\/td>\n9.9<\/td>\n2.03<\/td>\n9.00\/2023<\/td>\n0.59<\/td>\n<\/tr>\n
EP-*C40HF3<\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.0<\/td>\n2.03<\/td>\n20.00\/4496<\/td>\n0.94<\/td>\n<\/tr>\n
EP-*C08BHF8<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n19.9<\/td>\n21.0<\/td>\n11.8<\/td>\n2.42\/2.03<\/td>\n25.00\/5620<\/td>\n1.04<\/td>\n<\/tr>\n
EP-10BH<\/td>\n15.875<\/td>\n10.16<\/td>\n9.65<\/td>\n5.08<\/td>\n20.2<\/td>\n21.6<\/td>\n14.7<\/td>\n1.85<\/td>\n25.00\/5681<\/td>\n1.03<\/td>\n<\/tr>\n
EP-10BHF1<\/td>\n15.875<\/td>\n10.16<\/td>\n6.45<\/td>\n5.08<\/td>\n18.0<\/td>\n19.8<\/td>\n14.7<\/td>\n2.10<\/td>\n23.60\/5305<\/td>\n1.05<\/td>\n<\/tr>\n
EP-12BH<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.2<\/td>\n26.8<\/td>\n16.0<\/td>\n2.42<\/td>\n40.00\/9091<\/td>\n1.45<\/td>\n<\/tr>\n
EP-12BHF1<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.0<\/td>\n27.2<\/td>\n16.5<\/td>\n2.50<\/td>\n44.00\/10000<\/td>\n1.46<\/td>\n<\/tr>\n
EP-12BHF2<\/td>\n19.050<\/td>\n12.07<\/td>\n13.30<\/td>\n6.10<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.72<\/td>\n<\/tr>\n
EP-12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n13.50<\/td>\n5.72<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.71<\/td>\n<\/tr>\n
EP-12BV<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n24.5<\/td>\n26.5<\/td>\n16.0<\/td>\n2.42<\/td>\n36.00\/8182<\/td>\n1.43<\/td>\n<\/tr>\n
EP-60HV<\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.0<\/td>\n3.25<\/td>\n40.00\/9090<\/td>\n2.00<\/td>\n<\/tr>\n
EP-12AHF7<\/td>\n19.050<\/td>\n11.91<\/td>\n9.50<\/td>\n5.94<\/td>\n25.9<\/td>\n27.7<\/td>\n18.0<\/td>\n3.25<\/td>\n49.00\/11015<\/td>\n1.78<\/td>\n<\/tr>\n
EP-12AHF101<\/td>\n19.050<\/td>\n11.91<\/td>\n9.40<\/td>\n5.94<\/td>\n26.3<\/td>\n28.1<\/td>\n18.0<\/td>\n3.25<\/td>\n53.00\/11914<\/td>\n1.81<\/td>\n<\/tr>\n
EP-12BHF5<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n6.10<\/td>\n25.2<\/td>\n26.8<\/td>\n17.9<\/td>\n2.42<\/td>\n40.00\/8992<\/td>\n1.60<\/td>\n<\/tr>\n
EP-*C12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.72<\/td>\n29.3<\/td>\n31.2<\/td>\n20.0<\/td>\n4.00\/3.00<\/td>\n31.40\/7059<\/td>\n2.38<\/td>\n<\/tr>\n
EP-16BH<\/td>\n25.400<\/td>\n15.88<\/td>\n17.02<\/td>\n8.90<\/td>\n35.7<\/td>\n38.9<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n3.11<\/td>\n<\/tr>\n
EP-16BHF3<\/td>\n25.400<\/td>\n15.88<\/td>\n12.70<\/td>\n8.90<\/td>\n31.6<\/td>\n35.0<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n2.90<\/td>\n<\/tr>\n
EP-*C20AHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.05<\/td>\n10.32<\/td>\n43.6<\/td>\n46.9<\/td>\n30.0<\/td>\n6.00\/4.80<\/td>\n146.00\/32821<\/td>\n5.40<\/td>\n<\/tr>\n
EP-20BH<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n26.4<\/td>\n6.00\/4.80<\/td>\n95.00\/21356<\/td>\n4.52<\/td>\n<\/tr>\n
EP-20BHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n29.2<\/td>\n6.00\/4.80<\/td>\n100.00\/33720<\/td>\n5.09<\/td>\n<\/tr>\n
EP-24BH<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n58.6<\/td>\n63.4<\/td>\n36.2<\/td>\n7.50\/6.00<\/td>\n225.00\/51136<\/td>\n9.00<\/td>\n<\/tr>\n
EP-24BHF2<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n57.8<\/td>\n62.2<\/td>\n37.0<\/td>\n7.20\/6.00<\/td>\n225.40\/51226<\/td>\n9.06<\/td>\n<\/tr>\n
EP-24BHF5<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n64.6<\/td>\n69.1<\/td>\n36.2<\/td>\n9.00\/7.50<\/td>\n270.00\/61344<\/td>\n10.60<\/td>\n<\/tr>\n
EP-28BH<\/td>\n44.450<\/td>\n27.94<\/td>\n30.99<\/td>\n15.90<\/td>\n69.6<\/td>\n75.0<\/td>\n36.7<\/td>\n8.50\/7.20<\/td>\n200.00\/44960<\/td>\n9.99<\/td>\n<\/tr>\n
EP-32AHF1<\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n15.90<\/td>\n75.4<\/td>\n80.3<\/td>\n47.8<\/td>\n9.00<\/td>\n222.40\/49996<\/td>\n13.36<\/td>\n<\/tr>\n
EP-32BH<\/td>\n50.800<\/td>\n29.21<\/td>\n30.99<\/td>\n17.81<\/td>\n72.0<\/td>\n77.2<\/td>\n42.0<\/td>\n8.00<\/td>\n250.00\/56200<\/td>\n11.26<\/td>\n<\/tr>\n
EP-32BHF1<\/td>\n50.800<\/td>\n29.21<\/td>\n31.55<\/td>\n17.81<\/td>\n69.9<\/td>\n74.7<\/td>\n48.2<\/td>\n8.00\/7.15<\/td>\n350.00\/78680<\/td>\n13.20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

\"\"<\/p>\n

\n

Kedy si vybra\u0165 s\u00e9riu Heavy Duty pred \u0161tandardnou s\u00e9riou A<\/h2>\n
\n
\n

\u010cast\u00e9 \u0161tartovanie a zastavovanie pri za\u0165a\u017een\u00ed<\/h3>\n

Ka\u017ed\u00fd cyklus zastavenia a spustenia zav\u00e1dza do re\u0165aze r\u00e1zov\u00fd impulz v \u0165ahu, preto\u017ee uvo\u013enen\u00e1 strana sa n\u00e1hle napne. Hrub\u0161ie dosky v s\u00e9rii H maj\u00fa v\u00e4\u010d\u0161iu plochu prierezu, a teda vy\u0161\u0161iu medzu \u00fanavy pri opakovanom cyklickom nam\u00e1han\u00ed \u0165ahom. Aplik\u00e1cie, ktor\u00e9 sa sp\u00fa\u0161\u0165aj\u00fa a zastavuj\u00fa viac ako 20-kr\u00e1t za hodinu pod za\u0165a\u017een\u00edm, by mali \u0161pecifikova\u0165 minim\u00e1lne s\u00e9riu H.<\/p>\n<\/div>\n

\n

Vplyv spriahnut\u00fdch strojov<\/h3>\n

Vratn\u00e9 lisy, dierovacie lisy, \u010de\u013eus\u0165ov\u00e9 drvi\u010de a mlyny na cukrov\u00fa trstinu generuj\u00fa ostr\u00e9 r\u00e1zov\u00e9 impulzy prostredn\u00edctvom svojej hnacej re\u0165aze. Prev\u00e1dzkov\u00fd faktor pre tak\u00e9to aplik\u00e1cie zvy\u010dajne dosahuje 1,5 a\u017e 2,0 pri \u0161tandardnej s\u00e9rii A, v\u010faka \u010domu je s\u00e9ria H spr\u00e1vnou vo\u013ebou bez nutnosti prechodu na v\u00e4\u010d\u0161\u00ed rozstup alebo viac prame\u0148ov.<\/p>\n<\/div>\n

\n

Po\u013enohospod\u00e1rske \u0165a\u017ek\u00e9 pohony<\/h3>\n

Hlavn\u00e9 pohony kombajnov, vytriasadl\u00e1 a ml\u00e1tiace bubny kombinuj\u00fa vysok\u00e9 preru\u0161ovan\u00e9 za\u0165a\u017eenie s n\u00e1razmi z po\u017eitia plodiny. S\u00e9ria H je pre tieto pohony \u0161iroko \u0161pecifikovan\u00e1 ako origin\u00e1lne vybavenie, preto\u017ee hrub\u0161ie dosky predl\u017euj\u00fa \u017eivotnos\u0165 v po\u013en\u00fdch podmienkach, kde je v\u00fdmena re\u0165az\u00ed drah\u00e1 a nepraktick\u00e1.<\/p>\n<\/div>\n

\n

Prostredie s vysok\u00fdmi vibr\u00e1ciami<\/h3>\n

Vibra\u010dn\u00e9 sit\u00e1, vibra\u010dn\u00e9 pod\u00e1va\u010de, vibra\u010dn\u00e9 dopravn\u00edky a drvi\u010de pren\u00e1\u0161aj\u00fa vysokofrekven\u010dn\u00e9 vibr\u00e1cie do hnacej re\u0165aze cez ozuben\u00e9 koleso a hriade\u013e. \u00danavov\u00e9 trhliny v \u010dl\u00e1nkov\u00fdch dosk\u00e1ch vznikaj\u00fa naj\u013eah\u0161ie na okraji otvoru pre \u010dap pri striedavom nam\u00e1han\u00ed. Hrub\u0161ia doska s\u00e9rie H rozklad\u00e1 toto nam\u00e1hanie na v\u00e4\u010d\u0161iu plochu, \u010d\u00edm odol\u00e1va vzniku trhl\u00edn.<\/p>\n<\/div>\n

\n

Rovnak\u00e9 ozuben\u00e9 koles\u00e1, vy\u0161\u0161ia kapacita<\/h3>\n

S\u00e9ria H pou\u017e\u00edva rovnak\u00fd rozstup ako ekvivalent s\u00e9rie A, tak\u017ee je vhodn\u00e1 pre rovnak\u00e9 ozuben\u00e9 koles\u00e1 bez akejko\u013evek \u00fapravy rozlo\u017eenia pohonu. V pr\u00edpade, \u017ee sa zistilo, \u017ee \u0161tandardn\u00e1 re\u0165az s\u00e9rie A nem\u00e1 dostato\u010dn\u00fa \u017eivotnos\u0165, prechod na s\u00e9riu H vy\u017eaduje iba v\u00fdmenu re\u0165aze, nie prepracovanie stredov ozuben\u00fdch kolies, hriade\u013eov alebo ochrann\u00fdch krytov.<\/p>\n<\/div>\n

\n

Ne\u0161tandardn\u00e9 po\u017eiadavky OEM<\/h3>\n

Ne\u0161tandardn\u00e9 s\u00e9rie BH a BHF sa vyr\u00e1baj\u00fa ako n\u00e1hrada pre v\u00fdrobcov origin\u00e1lnych dielov (OEM), kde bol stroj p\u00f4vodne navrhnut\u00fd pod\u013ea vlastnej \u0161pecifik\u00e1cie re\u0165aze, ktor\u00fa nepokr\u00fdva \u0161tandardn\u00e1 s\u00e9ria H. K dispoz\u00edcii s\u00fa rovn\u00e9 bo\u010dn\u00e9 dosky (BHF), pr\u00edrubov\u00e9 dosky, \u0161ir\u0161ie vn\u00fatorn\u00e9 \u0161\u00edrky alebo kombinovan\u00e9 polohy val\u010dekov a puzdier. Pre cenov\u00fa ponuku poskytnite vzorku re\u0165aze alebo v\u00fdkres.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Aplik\u00e1cie<\/h2>\n
\n
\n

Po\u013enohospod\u00e1rske stroje<\/h3>\n

Simplexn\u00e9 re\u0165aze EP 40H a\u017e 100H s\u00fa \u0161tandardnou \u0161pecifik\u00e1ciou pre hlavn\u00e9 pohony kombajnov, pohony vytriasadidiel a pohony \u0161nekov na obilie. Re\u0165az 40H-1 je celosvetovo najpou\u017e\u00edvanej\u0161ou vysokov\u00fdkonnou re\u0165azou v po\u013enohospod\u00e1rskych strojoch. Vy\u0161\u0161ia hr\u00fabka plechu absorbuje r\u00e1zov\u00e9 za\u0165a\u017eenie sp\u00f4soben\u00e9 zachyt\u00e1van\u00edm plod\u00edn a kame\u0148mi vstupuj\u00facimi do pod\u00e1vacieho mechanizmu, \u010d\u00edm sa \u017eivotnos\u0165 na poli zvy\u0161uje pribli\u017ene o 40% v porovnan\u00ed s ekvivalentnou \u0161tandardnou re\u0165azou 40 za rovnak\u00fdch podmienok.<\/p>\n<\/div>\n

\n

Pohony lisov a dierova\u010dov<\/h3>\n

Mechanick\u00e9 lisy, dierovacie lisy a raziace stroje pren\u00e1\u0161aj\u00fa ostr\u00fd r\u00e1zov\u00fd impulz cez hnaciu re\u0165az v momente kontaktu s razn\u00edkom a jeho prerazenia. Pre hlavn\u00e9 pohony lisov a zotrva\u010dn\u00edkov sa be\u017ene predpisuj\u00fa simplexn\u00e9 a duplexn\u00e9 re\u0165aze EP 80H-1, 100H-1 a 120H-1. \u0164a\u017e\u0161ia \u010das\u0165 plechu odol\u00e1va \u00fanavov\u00e9mu praskaniu, ktor\u00e9 by sa inak vytvorilo na okraji otvoru pre \u010dap pri opakovan\u00fdch cykloch nam\u00e1hania s vysokou amplit\u00fadou.<\/p>\n<\/div>\n

\n

\u0164a\u017eba a lom<\/h3>\n

Re\u0165aze EP 120H a\u017e 240H pre pohonn\u00e9 re\u0165aze prim\u00e1rnych drvi\u010dov, pohony vibra\u010dn\u00fdch s\u00edt a pohonn\u00e9 re\u0165aze pod\u00e1va\u010dov v bansk\u00fdch a lomov\u00fdch z\u00e1vodoch. Duplexn\u00e9 re\u0165aze 120H-2 a 160H-2 s\u00fa \u0161tandardn\u00fdm radom ve\u013ekost\u00ed pre hlavn\u00e9 pohony \u010de\u013eus\u0165ov\u00fdch drvi\u010dov. S\u00e9ria H je tie\u017e ur\u010den\u00e1 pre pohony \u00fapravn\u00ed uhlia, kde voda a uho\u013en\u00fd prach kontaminuj\u00fa mazivo a pohon pracuje s premenliv\u00fdm za\u0165a\u017een\u00edm v d\u00f4sledku kol\u00edsania r\u00fdchlosti pod\u00e1vania uhlia.<\/p>\n<\/div>\n

\n

Cukrovarn\u00edcky priemysel<\/h3>\n

Sugar mill main drives and cane elevator drives use EP heavy duty chains in the 100H to 200H range. The juice environment is highly corrosive to steel chain, and the cane ingestion load is unpredictable – a stone or dense root clump entering the mill can momentarily spike the load to several times the rated running load. The H series provides the combination of corrosion resistance (through correct lubrication specification) and fatigue strength required for these demanding tropical mill conditions.<\/p>\n<\/div>\n<\/div>\n

\"Testovanie<\/p>\n

Zodpovedaj\u00face ozuben\u00e9 koles\u00e1 a in\u00e9 typy re\u0165az\u00ed<\/h2>\n
\n
\n

\"Ozuben\u00e9<\/p>\n

Zodpovedaj\u00face ozuben\u00e9 koles\u00e1 pre ka\u017ed\u00fa ve\u013ekos\u0165 re\u0165aze EP s\u00fa k dispoz\u00edcii na na\u0161ej partnerskej str\u00e1nke. sprocket-chain.net<\/a>V\u0161etky tvary zubov pod\u013ea noriem ANSI B29.1 a ISO 606, od simplexn\u00fdch a\u017e po 8-prame\u0148ov\u00e9, z uhl\u00edkovej a legovanej ocele C45, s vodiacim otvorom a n\u00e1bojom s hotov\u00fdm otvorom.<\/p>\n

Zobrazi\u0165 zodpovedaj\u00face ozuben\u00e9 koles\u00e1 \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

\n

Ostatn\u00e9 re\u0165aze<\/h3>\n
\n
\n

\"Re\u0165aze<\/p>\n

Re\u0165aze z nehrdzavej\u00facej ocele<\/a><\/h3>\n

Val\u010dekov\u00e9 re\u0165aze SUS304 a SUS316L pre potravin\u00e1rsky, farmaceutick\u00fd a koroz\u00edvny priemysel.<\/p>\n

Rozsah zobrazenia<\/a><\/p>\n<\/div>\n

\n

\"Po\u013enohospod\u00e1rske<\/p>\n

Po\u013enohospod\u00e1rske re\u0165azce<\/a><\/h3>\n

S\u00e9rie CA, CC a S pre kombajny, lisy na bal\u00edky a stroje na manipul\u00e1ciu s plodinami. Norma ISO 487.<\/p>\n

Rozsah zobrazenia<\/a><\/p>\n<\/div>\n

\n

\"Zv\u00e1ran\u00e9<\/p>\n

In\u017einierske re\u0165azce<\/a><\/h3>\n

Zv\u00e1ran\u00e9 oce\u013eov\u00e9, liate a okr\u00fahle \u010dl\u00e1nkov\u00e9 re\u0165aze WH na prepravu cementu, v ban\u00edctve a \u0165a\u017ek\u00fdch strojov.<\/p>\n

Rozsah zobrazenia<\/a><\/p>\n<\/div>\n<\/div>\n

\"\"<\/div>\n<\/div>\n

\u010casto kladen\u00e9 ot\u00e1zky<\/h2>\n
\n
\nAk\u00fd je rozdiel medzi s\u00e9riou H a \u0161tandardnou s\u00e9riou A pri rovnakom rozstupe?<\/summary>\n
The H series uses thicker link plates than the standard A series at the same pitch. For example, a standard 60 (08A) chain has a plate thickness of 2.42 mm; the 60H chain has a plate thickness of 3.25 mm – approximately 34% thicker. The larger plate cross-section gives a higher minimum tensile strength (31.8 kN versus about 31.8 kN for the standard – the gain is primarily in fatigue life and plate thickness rather than tensile strength at the smaller sizes, becoming more pronounced at 80 and above where the H series clearly outperforms the standard chain). The pin diameter and roller diameter remain the same, so H series chains run on standard pitch sprockets without any modification.<\/div>\n<\/details>\n
\nM\u00f4\u017eem pou\u017ei\u0165 re\u0165aze s\u00e9rie H na moje existuj\u00face ozuben\u00e9 koles\u00e1 s\u00e9rie A?<\/summary>\n
\u00c1no, re\u0165aze s\u00e9rie H be\u017eia na \u0161tandardn\u00fdch ozuben\u00fdch koles\u00e1ch s\u00e9rie ANSI A bez akejko\u013evek \u00fapravy. Rozstup, priemer val\u010deka a vn\u00fatorn\u00e1 \u0161\u00edrka s\u00e9rie H zodpovedaj\u00fa ekvivalentom s\u00e9rie A s rovnak\u00fdm \u010d\u00edslom re\u0165aze. Jedin\u00fd rozmer, ktor\u00fd sa l\u00ed\u0161i, je hr\u00fabka dosky a to nem\u00e1 \u017eiadny vplyv na z\u00e1ber ozuben\u00e9ho kolesa, preto\u017ee tvar zuba ozuben\u00e9ho kolesa zaber\u00e1 s val\u010dekom a vn\u00fatorn\u00fdmi doskami, a nie s vonkaj\u0161\u00edmi doskami. Hrub\u0161ie vonkaj\u0161ie dosky jednoducho mierne pre\u010dnievaj\u00fa za zub ozuben\u00e9ho kolesa, \u010do je v r\u00e1mci norm\u00e1lnej kon\u0161truk\u010dnej v\u00f4le.<\/div>\n<\/details>\n
\n\u010co znamenaj\u00fa pr\u00edpony na re\u0165aziach s\u00e9rie BH (BH, BHF1, BHF2 at\u010f.)?<\/summary>\n
The BH designation identifies these as heavy duty variants of the ISO B series roller chain geometry, produced by Ever-Power for specific OEM applications. The F in BHF stands for flat side plate (also called straight side plate) – a plate shape where the inner and outer plates are the same rectangular profile rather than the usual waisted figure-eight shape used in standard roller chains. The number after F identifies the specific plate profile variant (F1, F2, F3, F5 etc. are different proprietary plate dimensions used by different OEM machine manufacturers). The V suffix (as in 12BV or 60HV) identifies a chain with a specific plate profile used in high-speed applications. When ordering BH or BHF chains as replacements, always provide the complete EP chain number from the specification table and verify against a sample of the original chain.<\/div>\n<\/details>\n
\nL\u00ed\u0161i sa mazanie pre s\u00e9riu H v porovnan\u00ed so \u0161tandardn\u00fdmi re\u0165azami?<\/summary>\n
The lubrication requirements for H series chains are the same as for standard A series chains at the same pitch and speed – mineral oil applied at the pin-bush joint by drip oiler, bath, or spray system depending on chain speed. The lubrication method does not need to change when upgrading from A series to H series. What does sometimes change is the lubrication interval in severe applications: because the H series is typically specified for shock-loaded drives with more demanding duty cycles, more frequent oil replenishment may be required to maintain the oil film under high joint-load conditions. For drives with service factors above 1.5, consider a continuous drip oiler even at speeds below 1 m\/s.<\/div>\n<\/details>\n
\nAk\u00e9 spojovacie \u010dl\u00e1nky sa pou\u017e\u00edvaj\u00fa pre re\u0165aze s\u00e9rie H?<\/summary>\n
Re\u0165aze s\u00e9rie H pou\u017e\u00edvaj\u00fa spojovacie \u010dl\u00e1nky so z\u00e1vla\u010dkou (rozdvojen\u00fdm \u010dapom) namiesto spojovac\u00edch \u010dl\u00e1nkov s pru\u017einov\u00fdmi svorkami, \u010do odr\u00e1\u017ea vy\u0161\u0161ie za\u0165a\u017eenie k\u013abov v n\u00e1ro\u010dn\u00fdch aplik\u00e1ci\u00e1ch. Spojka so z\u00e1vla\u010dkou je pri r\u00e1zovom za\u0165a\u017een\u00ed bezpe\u010dnej\u0161ia ako pru\u017einov\u00e1 svorka, ktor\u00e1 sa m\u00f4\u017ee uvo\u013eni\u0165, ak re\u0165az agres\u00edvne vibruje. Pre re\u0165aze od 40H do 60H je \u0161tandardom dvojz\u00e1vla\u010dkov\u00fd spojovac\u00ed \u010dl\u00e1nok. Pre re\u0165aze od 80H je ako alternat\u00edva k z\u00e1vla\u010dke k dispoz\u00edcii skrutkov\u00fd spojovac\u00ed \u010dl\u00e1nok so \u0161es\u0165hrann\u00fdmi skrutkami a poistn\u00fdmi maticami pre aplik\u00e1cie, kde je potrebn\u00e9 spojovac\u00ed \u010dl\u00e1nok \u010dasto odstra\u0148ova\u0165 a op\u00e4tovne montova\u0165. Pri ka\u017edej v\u00fdmene re\u0165aze v\u017edy vyme\u0148te spojovac\u00ed \u010dl\u00e1nok bez oh\u013eadu na jeho zjavn\u00fd stav.<\/div>\n<\/details>\n
\nViete doda\u0165 ne\u0161tandardn\u00e9 re\u0165aze BH a BHF ako n\u00e1hradu za existuj\u00face stroje?<\/summary>\n
\u00c1no. Rad BH a BHF je ur\u010den\u00fd \u0161peci\u00e1lne ako n\u00e1hrada za OEM pre stroje, ktor\u00e9 pou\u017e\u00edvaj\u00fa ne\u0161tandardn\u00e9 \u0161pecifik\u00e1cie re\u0165az\u00ed. Ak sa \u010d\u00edslo va\u0161ej re\u0165aze nach\u00e1dza v tabu\u013eke BH alebo BHF vy\u0161\u0161ie, uve\u010fte \u010d\u00edslo re\u0165aze EP, mno\u017estvo v metroch alebo po\u010det \u010dl\u00e1nkov a \u010di je potrebn\u00fd spojovac\u00ed \u010dl\u00e1nok. Ak sa va\u0161a re\u0165az v tabu\u013eke nenach\u00e1dza, po\u0161lite vzorku aspo\u0148 5 spojen\u00fdch \u010dl\u00e1nkov na rozmerov\u00fa kontrolu a EP identifikuje najbli\u017e\u0161iu zhodu alebo vyrob\u00ed re\u0165az na mieru s rozmermi va\u0161ej vzorky s minim\u00e1lnym objednan\u00fdm mno\u017estvom 10 metrov. V pr\u00edpade urgentn\u00fdch v\u00fdmen uve\u010fte: rozstup (meran\u00fd cez 10 po sebe id\u00facich stredov \u010dapov, delen\u00fd 10), priemer val\u010deka alebo vonkaj\u0161\u00ed priemer puzdra, vn\u00fatorn\u00fa \u0161\u00edrku medzi doskami, priemer \u010dapu a hr\u00fabku dosky. Fotografie z \u010delnej strany aj z hrany s\u00fa tie\u017e u\u017eito\u010dn\u00e9 na identifik\u00e1ciu typu profilu dosky.<\/div>\n<\/details>\n<\/div>\n

\u010co hovoria na\u0161i z\u00e1kazn\u00edci<\/h2>\n
\n
\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We upgraded our combine harvester main drive from standard 80 chain to EP 80H-1. The previous standard chains were needing replacement every harvest season. The 80H chains have now run for three full harvests with elongation at 1.6% – well within the 3% replacement threshold. The cost per season is significantly lower even though the EP 80H chain has a higher purchase price.”<\/p>\n

BK, in\u017einier vozov\u00e9ho parku<\/strong>
\nUkraine – Large Grain Farm<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our jaw crusher main drive uses 120H-2 duplex chains. We had a history of fatigue plate fractures with previous supplier chains approximately every 8 months. EP 120H-2 chains have been running for 19 months without any plate fracture or connecting link failure. The improvement is directly attributable to the consistent plate hardness across the batch – no soft spots.”<\/p>\n

AO, ved\u00faci \u00fadr\u017eby<\/strong>
\nSouth Africa – Aggregate Quarry<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We needed a 12BHF2 non-standard chain to replace the original OEM specification on our packaging machine elevator drive. EP confirmed the chain from our EP chain number, delivered 5 complete circuit lengths cut and fitted with connecting links within 9 working days. The chains matched the original dimensions exactly and fitted without adjustment.”<\/p>\n

PW, technick\u00fd mana\u017e\u00e9r<\/strong>
\nGermany – Food Packaging Plant<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our sugar mill drive specifies 160H-1 simplex chains for the cane elevator. The EP chains have been running through two grinding seasons in a highly corrosive juice environment with correct lubrication. Service life has exceeded our planned replacement interval and our maintenance team now standardises on EP H series across all mill drives.”<\/p>\n

RF, hlavn\u00fd in\u017einier<\/strong>
\nThailand – Sugar Mill<\/p>\n<\/div>\n<\/div>\n

\n
\n

Vy\u017eiadajte si cenov\u00fa ponuku na val\u010dekov\u00e9 re\u0165aze EP pre vysok\u00e9 za\u0165a\u017eenie<\/h3>\n

Uve\u010fte ozna\u010denie re\u0165aze (\u010d\u00edslo ANSI s\u00e9rie H s pr\u00edponou prame\u0148a alebo \u010d\u00edslo re\u0165aze EP-BH\/BHF), mno\u017estvo v metroch alebo po\u010det \u010dl\u00e1nkov a \u010di je potrebn\u00e1 \u0161pecifik\u00e1cia upevnenia alebo spojovacieho \u010dl\u00e1nku. Pre ne\u0161tandardn\u00e9 re\u0165aze BH\/BHF posta\u010duje na cenov\u00fa ponuku \u010d\u00edslo re\u0165aze EP z tabu\u013eky vy\u0161\u0161ie alebo vzorka rozmerov. N\u00e1\u0161 t\u00edm odpovie do jedn\u00e9ho pracovn\u00e9ho d\u0148a.<\/p>\n

Z\u00edskajte cenov\u00fa ponuku teraz<\/a>
\nV\u0161etky produkty pre hnacie re\u0165aze<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

Vysokoz\u00e1\u0165a\u017eov\u00e9 re\u0165aze s\u00e9rie H, ne\u0161tandardn\u00e9 vysokoz\u00e1\u0165a\u017eov\u00e9 re\u0165aze, simplex, duplex a triplex. Hrub\u0161ie dosky a v\u00e4\u010d\u0161ie \u010dapy ako \u0161tandardn\u00e1 s\u00e9ria A pri rovnakom rozstupe. Rozstup 9,525 mm a\u017e 76,2 mm. \u0164a\u017ek\u00e1 s\u00e9ria Ever-Power *35H a\u017e 240H plus ne\u0161tandardn\u00fd rad BH\/BHF.<\/p>","protected":false},"featured_media":122,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-206","product","type-product","status-publish","has-post-thumbnail","product_cat-driving-chains","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/5speedtransmission.com\/sk\/wp-json\/wp\/v2\/product\/206","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/5speedtransmission.com\/sk\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/5speedtransmission.com\/sk\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/sk\/wp-json\/wp\/v2\/comments?post=206"}],"wp:attachment":[{"href":"https:\/\/5speedtransmission.com\/sk\/wp-json\/wp\/v2\/media?parent=206"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/5speedtransmission.com\/sk\/wp-json\/wp\/v2\/product_brand?post=206"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/5speedtransmission.com\/sk\/wp-json\/wp\/v2\/product_cat?post=206"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/5speedtransmission.com\/sk\/wp-json\/wp\/v2\/product_tag?post=206"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}