{"id":206,"date":"2026-07-24T06:13:54","date_gmt":"2026-07-24T06:13:54","guid":{"rendered":"https:\/\/5speedtransmission.com\/?post_type=product&p=206"},"modified":"2026-07-24T06:13:54","modified_gmt":"2026-07-24T06:13:54","slug":"heavy-duty-series-roller-chains","status":"publish","type":"product","link":"https:\/\/5speedtransmission.com\/pt\/produto\/heavy-duty-series-roller-chains\/","title":{"rendered":"Correntes de rolos da s\u00e9rie Heavy Duty"},"content":{"rendered":"
\n
\n
\n

S\u00e9rie H<\/p>\n

e BH \/ BHF N\u00e3o Padr\u00e3o<\/p>\n<\/div>\n

\n

9,525 a 76,2 mm<\/p>\n

Faixa de arremesso<\/p>\n<\/div>\n

\n

At\u00e9 1.650 kN<\/p>\n

Carga de ruptura triplex<\/p>\n<\/div>\n

\n

ISO 9001<\/p>\n

Qualidade Certificada<\/p>\n<\/div>\n<\/div>\n

Heavy Duty Roller Chain – Product Overview<\/h2>\n
\n
\n

Coreia Ever-Power correntes de rolos da s\u00e9rie para servi\u00e7o pesado<\/a> are an uprated variant of the standard short pitch roller chain range, designed for applications where the operating load, shock loading severity, or duty cycle exceeds what the standard A series can comfortably handle at the same pitch. The heavy duty designation refers to thicker link plates – typically 25% to 40% heavier than the standard A series plate at the same pitch – combined with larger diameter pins and in some sizes an increased inner width, all while maintaining the same pitch so that the chain can run on standard pitch sprockets without any modification to the sprocket or drive configuration.<\/p>\n

A s\u00e9rie EP H abrange correntes nos tamanhos *35H a 240H nas configura\u00e7\u00f5es simplex (um \u00fanico fio, sufixo -1), duplex (dois fios, sufixo -2) e triplex (tr\u00eas fios, sufixo -3). O sufixo H \u00e9 a designa\u00e7\u00e3o padr\u00e3o da ind\u00fastria para a geometria de placa refor\u00e7ada: uma corrente 35H tem o mesmo passo de 9,525 mm e o mesmo di\u00e2metro de rolete que uma corrente 35 padr\u00e3o, mas as placas dos elos s\u00e3o mais espessas, o que lhe confere maior resist\u00eancia \u00e0 tra\u00e7\u00e3o e maior vida \u00fatil sob cargas repetidas. Isso \u00e9 importante em aplica\u00e7\u00f5es como acionamentos principais de colheitadeiras agr\u00edcolas, acionamentos de plataformas de toras, acionamentos principais de m\u00e1quinas de embalagem e acionamentos industriais em geral que iniciam e param sob carga, sofrem vibra\u00e7\u00e3o de m\u00e1quinas acopladas ou precisam suportar os picos de choque gerados quando a folga da corrente \u00e9 liberada repentinamente durante a invers\u00e3o de carga.<\/p>\n

Beyond the standard H series, Korea Ever-Power manufactures a comprehensive range of non-standard heavy duty chains under the BH and BHF designations. These are chains developed for specific OEM applications where neither the standard A series nor the standard H series geometry exactly matches the sprocket tooth form or structural requirement of the original equipment. The BH range includes straight side plate variants (where the inner and outer plates are the same flat profile rather than the usual waisted figure-eight shape), flanged plate variants for guide track applications, and combination chains with mixed roller and bush positions for specific machine functions. Bush chains within both the H series and the BH range are marked with an asterisk (*) – for these chains the d1 dimension in the specification table refers to the external diameter of the bush rather than an outer roller diameter, because no separate outer roller is fitted.<\/p>\n

A linha de produ\u00e7\u00e3o de correntes de servi\u00e7o pesado da Korea Ever-Power utiliza os mesmos processos de conforma\u00e7\u00e3o a frio e tratamento t\u00e9rmico da s\u00e9rie A, com pinos de a\u00e7o-liga temperados em toda a sua extens\u00e3o, buchas cementadas e placas tratadas termicamente. As se\u00e7\u00f5es de placa mais espessas da s\u00e9rie H exigem ciclos de tratamento t\u00e9rmico mais longos para atingir propriedades uniformes do n\u00facleo, e os di\u00e2metros maiores dos pinos requerem um controle dimensional mais preciso na retifica\u00e7\u00e3o para manter a folga correta entre pino e bucha, garantindo uma boa reten\u00e7\u00e3o da pel\u00edcula lubrificante. Uma pr\u00e9-carga \u00e9 aplicada a cada corrente da s\u00e9rie H montada antes da medi\u00e7\u00e3o do passo para eliminar o alongamento durante a instala\u00e7\u00e3o, da mesma forma que na linha padr\u00e3o da s\u00e9rie A. Os elos de conex\u00e3o da s\u00e9rie H utilizam pinos de chaveta ou pinos bipartidos em vez da presilha de mola usada em correntes padr\u00e3o mais leves, refletindo a maior carga nas juntas em servi\u00e7os pesados.<\/p>\n<\/div>\n

\"Produto<\/div>\n<\/div>\n
\n

Legenda da dimens\u00e3o:<\/strong> P = Passo | d1 = Di\u00e2metro m\u00e1ximo do rolete (corrente de buchas: di\u00e2metro externo da bucha) | b1 = Largura interna m\u00ednima entre as placas | d2 = Di\u00e2metro m\u00e1ximo do pino | L = Comprimento m\u00e1ximo do pino | Lc = Comprimento m\u00e1ximo do pino do elo de conex\u00e3o | h2 = Profundidade m\u00e1xima da placa interna | T = Espessura m\u00e1xima da placa | Pt = Passo transversal (duplex\/triplex) | Q = Resist\u00eancia m\u00ednima \u00e0 tra\u00e7\u00e3o kN\/lbf | Q0 = Resist\u00eancia m\u00e9dia \u00e0 tra\u00e7\u00e3o kN | q = Peso kg\/m | * = Corrente de buchas | F = Placas laterais retas (planas)<\/p>\n<\/div>\n

H Series Simplex – Single Strand (suffix -1)<\/h2>\n

Geometria de placa refor\u00e7ada. Mesmo passo que o equivalente da s\u00e9rie ANSI A. Placas mais espessas e pinos maiores proporcionam maior resist\u00eancia \u00e0 tra\u00e7\u00e3o e vida \u00fatil \u00e0 fadiga sob cargas de impacto. Correntes marcadas com * s\u00e3o correntes com bucha.<\/p>\n

\"dimens\u00e3o-da-corrente-de-transmiss\u00e3o-1\"<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI n\u00ba.<\/th>\nP (mm)<\/th>\nd1 m\u00e1x.<\/th>\nb1 min<\/th>\nd2 m\u00e1x.<\/th>\nL m\u00e1x.<\/th>\nLc m\u00e1x.<\/th>\nh2 m\u00e1x.<\/th>\nT m\u00e1x.<\/th>\nQ m\u00ednimo (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
EP-*35H-1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n13.3<\/td>\n14.3<\/td>\n9.00<\/td>\n1.50<\/td>\n7.9\/1795<\/td>\n10.8<\/td>\n0.41<\/td>\n<\/tr>\n
40H-1<\/strong><\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.00<\/td>\n2.03<\/td>\n14.1\/3205<\/td>\n19.1<\/td>\n0.82<\/td>\n<\/tr>\n
50H-1<\/strong><\/td>\n15.875<\/td>\n10.16<\/td>\n9.40<\/td>\n5.08<\/td>\n22.1<\/td>\n23.4<\/td>\n15.09<\/td>\n2.42<\/td>\n22.2\/5045<\/td>\n30.2<\/td>\n1.25<\/td>\n<\/tr>\n
60H-1<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.00<\/td>\n3.25<\/td>\n31.8\/7227<\/td>\n42.7<\/td>\n1.87<\/td>\n<\/tr>\n
80H-1<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n36.2<\/td>\n37.7<\/td>\n24.00<\/td>\n4.00<\/td>\n56.7\/12886<\/td>\n71.4<\/td>\n3.10<\/td>\n<\/tr>\n
100H-1<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n43.6<\/td>\n46.9<\/td>\n30.00<\/td>\n4.80<\/td>\n88.5\/20114<\/td>\n112.4<\/td>\n4.52<\/td>\n<\/tr>\n
120H-1<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n53.5<\/td>\n57.5<\/td>\n35.70<\/td>\n5.60<\/td>\n127.0\/28864<\/td>\n160.9<\/td>\n6.60<\/td>\n<\/tr>\n
140H-1<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n57.6<\/td>\n62.2<\/td>\n41.00<\/td>\n6.40<\/td>\n172.4\/39182<\/td>\n217.3<\/td>\n8.30<\/td>\n<\/tr>\n
160H-1<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n68.2<\/td>\n73.0<\/td>\n47.80<\/td>\n7.20<\/td>\n226.8\/51545<\/td>\n285.8<\/td>\n10.30<\/td>\n<\/tr>\n
180H-1<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n75.9<\/td>\n81.6<\/td>\n53.60<\/td>\n8.00<\/td>\n281.0\/63863<\/td>\n341.8<\/td>\n14.83<\/td>\n<\/tr>\n
200H-1<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n86.6<\/td>\n93.5<\/td>\n60.00<\/td>\n9.50<\/td>\n353.8\/80409<\/td>\n444.5<\/td>\n19.16<\/td>\n<\/tr>\n
240H-1<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n109.6<\/td>\n115.9<\/td>\n72.30<\/td>\n12.70<\/td>\n510.3\/115977<\/td>\n622.5<\/td>\n30.40<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Duplex – Two Strand (suffix -2)<\/h2>\n

Correntes duplex refor\u00e7adas dobram a capacidade de carga com o mesmo passo. Pt = passo transversal entre os centros dos fios. Dispon\u00edveis em passos de 60H a 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI n\u00ba.<\/th>\nP (mm)<\/th>\nd1 m\u00e1x.<\/th>\nb1 min<\/th>\nd2 m\u00e1x.<\/th>\nL m\u00e1x.<\/th>\nLc m\u00e1x.<\/th>\nh2 m\u00e1x.<\/th>\nT m\u00e1x.<\/th>\nPt (mm)<\/th>\nQ m\u00ednimo (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
60H-2<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n55.3<\/td>\n57.1<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n63.6\/14455<\/td>\n84.5<\/td>\n3.71<\/td>\n<\/tr>\n
80H-2<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n68.8<\/td>\n70.3<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n113.4\/25773<\/td>\n145.3<\/td>\n6.15<\/td>\n<\/tr>\n
100H-2<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n82.7<\/td>\n86.0<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n177.0\/40227<\/td>\n225.9<\/td>\n9.03<\/td>\n<\/tr>\n
120H-2<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n102.4<\/td>\n106.4<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n254.0\/57727<\/td>\n322.7<\/td>\n13.13<\/td>\n<\/tr>\n
140H-2<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n109.8<\/td>\n114.4<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n344.8\/78364<\/td>\n437.7<\/td>\n16.60<\/td>\n<\/tr>\n
160H-2<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n130.1<\/td>\n134.9<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n453.6\/103091<\/td>\n571.6<\/td>\n20.20<\/td>\n<\/tr>\n
180H-2<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n146.5<\/td>\n155.6<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n562\/127726<\/td>\n680.0<\/td>\n29.20<\/td>\n<\/tr>\n
200H-2<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n164.9<\/td>\n171.8<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n707.6\/160818<\/td>\n894.9<\/td>\n38.11<\/td>\n<\/tr>\n
240H-2<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n212.6<\/td>\n223.1<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1000\/227270<\/td>\n1200.0<\/td>\n60.50<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Triplex – Three Strand (suffix -3)<\/h2>\n

Correntes triplex de alta resist\u00eancia triplicam a capacidade de carga. Pt \u00e9 aplicado entre cada par de fios adjacentes. Dispon\u00edvel em passos de 60H a 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI n\u00ba.<\/th>\nP (mm)<\/th>\nd1 m\u00e1x.<\/th>\nb1 min<\/th>\nd2 m\u00e1x.<\/th>\nL m\u00e1x.<\/th>\nLc m\u00e1x.<\/th>\nh2 m\u00e1x.<\/th>\nT m\u00e1x.<\/th>\nPt (mm)<\/th>\nQ m\u00ednimo (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
60H-3<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n81.4<\/td>\n83.2<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n95.4\/21682<\/td>\n113.9<\/td>\n5.54<\/td>\n<\/tr>\n
80H-3<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n101.4<\/td>\n102.9<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n170.1\/38659<\/td>\n203.5<\/td>\n9.42<\/td>\n<\/tr>\n
100H-3<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n121.8<\/td>\n125.1<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n265.5\/60341<\/td>\n314.8<\/td>\n12.96<\/td>\n<\/tr>\n
120H-3<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n151.2<\/td>\n155.2<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n381.0\/86591<\/td>\n444.7<\/td>\n19.64<\/td>\n<\/tr>\n
140H-3<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n162.0<\/td>\n166.6<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n517.2\/117545<\/td>\n598.4<\/td>\n24.90<\/td>\n<\/tr>\n
160H-3<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n192.0<\/td>\n196.8<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n680.4\/154636<\/td>\n787.3<\/td>\n30.10<\/td>\n<\/tr>\n
180H-3<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n215.7<\/td>\n224.8<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n843\/191589<\/td>\n1011.0<\/td>\n44.10<\/td>\n<\/tr>\n
200H-3<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n243.2<\/td>\n250.1<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n1061.4\/241227<\/td>\n1228.2<\/td>\n57.06<\/td>\n<\/tr>\n
240H-3<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n313.8<\/td>\n324.3<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1500\/340905<\/td>\n1650.0<\/td>\n91.00<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Correntes refor\u00e7adas n\u00e3o padronizadas (s\u00e9ries BH \/ BHF)<\/h2>\n

Correntes refor\u00e7adas n\u00e3o padronizadas, produzidas de acordo com a numera\u00e7\u00e3o EP para aplica\u00e7\u00f5es espec\u00edficas de fabricantes de equipamentos originais (OEM). Inclui variantes com placa lateral reta (marcadas com F), variantes com placa flangeada e modelos combinados. * indica corrente com bucha; d1 para estas \u00e9 o di\u00e2metro externo da bucha. F indica placas laterais retas (planas).<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
N\u00ba da cadeia EP<\/th>\nP (mm)<\/th>\nd1 m\u00e1x.<\/th>\nb1 min<\/th>\nd2 m\u00e1x.<\/th>\nL m\u00e1x.<\/th>\nLc m\u00e1x.<\/th>\nh2 m\u00e1x.<\/th>\nt\/T<\/th>\nQ m\u00ednimo (kN\/lbf)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
EP-04BH<\/td>\n6.000<\/td>\n4.00<\/td>\n2.80<\/td>\n1.85<\/td>\n8.4<\/td>\n9.4<\/td>\n5.0<\/td>\n0.90<\/td>\n5.00\/1136<\/td>\n0.14<\/td>\n<\/tr>\n
EP-*06BH<\/td>\n9.525<\/td>\n6.35<\/td>\n5.72<\/td>\n3.28<\/td>\n14.4<\/td>\n15.4<\/td>\n8.2<\/td>\n1.60<\/td>\n11.25\/2557<\/td>\n0.51<\/td>\n<\/tr>\n
*35HF1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n14.6<\/td>\n15.6<\/td>\n9.0<\/td>\n1.80<\/td>\n9.00\/2023<\/td>\n0.47<\/td>\n<\/tr>\n
EP-08AHF1<\/td>\n12.700<\/td>\n7.95<\/td>\n10.00<\/td>\n3.96<\/td>\n21.0<\/td>\n22.2<\/td>\n12.0<\/td>\n2.03<\/td>\n13.80\/3136<\/td>\n0.88<\/td>\n<\/tr>\n
EP-08BH<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n18.8<\/td>\n19.9<\/td>\n11.8<\/td>\n2.03<\/td>\n20.60\/4682<\/td>\n0.79<\/td>\n<\/tr>\n
41HF1<\/td>\n12.700<\/td>\n7.77<\/td>\n6.25<\/td>\n3.58<\/td>\n16.7<\/td>\n18.0<\/td>\n9.9<\/td>\n2.03<\/td>\n9.00\/2023<\/td>\n0.59<\/td>\n<\/tr>\n
EP-*C40HF3<\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.0<\/td>\n2.03<\/td>\n20.00\/4496<\/td>\n0.94<\/td>\n<\/tr>\n
EP-*C08BHF8<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n19.9<\/td>\n21.0<\/td>\n11.8<\/td>\n2.42\/2.03<\/td>\n25.00\/5620<\/td>\n1.04<\/td>\n<\/tr>\n
EP-10BH<\/td>\n15.875<\/td>\n10.16<\/td>\n9.65<\/td>\n5.08<\/td>\n20.2<\/td>\n21.6<\/td>\n14.7<\/td>\n1.85<\/td>\n25.00\/5681<\/td>\n1.03<\/td>\n<\/tr>\n
EP-10BHF1<\/td>\n15.875<\/td>\n10.16<\/td>\n6.45<\/td>\n5.08<\/td>\n18.0<\/td>\n19.8<\/td>\n14.7<\/td>\n2.10<\/td>\n23.60\/5305<\/td>\n1.05<\/td>\n<\/tr>\n
EP-12BH<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.2<\/td>\n26.8<\/td>\n16.0<\/td>\n2.42<\/td>\n40.00\/9091<\/td>\n1.45<\/td>\n<\/tr>\n
EP-12BHF1<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.0<\/td>\n27.2<\/td>\n16.5<\/td>\n2.50<\/td>\n44.00\/10000<\/td>\n1.46<\/td>\n<\/tr>\n
EP-12BHF2<\/td>\n19.050<\/td>\n12.07<\/td>\n13.30<\/td>\n6.10<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.72<\/td>\n<\/tr>\n
EP-12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n13.50<\/td>\n5.72<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.71<\/td>\n<\/tr>\n
EP-12BV<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n24.5<\/td>\n26.5<\/td>\n16.0<\/td>\n2.42<\/td>\n36.00\/8182<\/td>\n1.43<\/td>\n<\/tr>\n
EP-60HV<\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.0<\/td>\n3.25<\/td>\n40.00\/9090<\/td>\n2.00<\/td>\n<\/tr>\n
EP-12AHF7<\/td>\n19.050<\/td>\n11.91<\/td>\n9.50<\/td>\n5.94<\/td>\n25.9<\/td>\n27.7<\/td>\n18.0<\/td>\n3.25<\/td>\n49.00\/11015<\/td>\n1.78<\/td>\n<\/tr>\n
EP-12AHF101<\/td>\n19.050<\/td>\n11.91<\/td>\n9.40<\/td>\n5.94<\/td>\n26.3<\/td>\n28.1<\/td>\n18.0<\/td>\n3.25<\/td>\n53.00\/11914<\/td>\n1.81<\/td>\n<\/tr>\n
EP-12BHF5<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n6.10<\/td>\n25.2<\/td>\n26.8<\/td>\n17.9<\/td>\n2.42<\/td>\n40.00\/8992<\/td>\n1.60<\/td>\n<\/tr>\n
EP-*C12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.72<\/td>\n29.3<\/td>\n31.2<\/td>\n20.0<\/td>\n4.00\/3.00<\/td>\n31.40\/7059<\/td>\n2.38<\/td>\n<\/tr>\n
EP-16BH<\/td>\n25.400<\/td>\n15.88<\/td>\n17.02<\/td>\n8.90<\/td>\n35.7<\/td>\n38.9<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n3.11<\/td>\n<\/tr>\n
EP-16BHF3<\/td>\n25.400<\/td>\n15.88<\/td>\n12.70<\/td>\n8.90<\/td>\n31.6<\/td>\n35.0<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n2.90<\/td>\n<\/tr>\n
EP-*C20AHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.05<\/td>\n10.32<\/td>\n43.6<\/td>\n46.9<\/td>\n30.0<\/td>\n6.00\/4.80<\/td>\n146.00\/32821<\/td>\n5.40<\/td>\n<\/tr>\n
EP-20BH<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n26.4<\/td>\n6.00\/4.80<\/td>\n95.00\/21356<\/td>\n4.52<\/td>\n<\/tr>\n
EP-20BHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n29.2<\/td>\n6.00\/4.80<\/td>\n100.00\/33720<\/td>\n5.09<\/td>\n<\/tr>\n
EP-24BH<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n58.6<\/td>\n63.4<\/td>\n36.2<\/td>\n7.50\/6.00<\/td>\n225.00\/51136<\/td>\n9.00<\/td>\n<\/tr>\n
EP-24BHF2<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n57.8<\/td>\n62.2<\/td>\n37.0<\/td>\n7.20\/6.00<\/td>\n225.40\/51226<\/td>\n9.06<\/td>\n<\/tr>\n
EP-24BHF5<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n64.6<\/td>\n69.1<\/td>\n36.2<\/td>\n9.00\/7.50<\/td>\n270.00\/61344<\/td>\n10.60<\/td>\n<\/tr>\n
EP-28BH<\/td>\n44.450<\/td>\n27.94<\/td>\n30.99<\/td>\n15.90<\/td>\n69.6<\/td>\n75.0<\/td>\n36.7<\/td>\n8.50\/7.20<\/td>\n200.00\/44960<\/td>\n9.99<\/td>\n<\/tr>\n
EP-32AHF1<\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n15.90<\/td>\n75.4<\/td>\n80.3<\/td>\n47.8<\/td>\n9.00<\/td>\n222.40\/49996<\/td>\n13.36<\/td>\n<\/tr>\n
EP-32BH<\/td>\n50.800<\/td>\n29.21<\/td>\n30.99<\/td>\n17.81<\/td>\n72.0<\/td>\n77.2<\/td>\n42.0<\/td>\n8.00<\/td>\n250.00\/56200<\/td>\n11.26<\/td>\n<\/tr>\n
EP-32BHF1<\/td>\n50.800<\/td>\n29.21<\/td>\n31.55<\/td>\n17.81<\/td>\n69.9<\/td>\n74.7<\/td>\n48.2<\/td>\n8.00\/7.15<\/td>\n350.00\/78680<\/td>\n13.20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

\"\"<\/p>\n

\n

Quando escolher a S\u00e9rie Heavy Duty em vez da S\u00e9rie A padr\u00e3o<\/h2>\n
\n
\n

Partidas e paradas frequentes sob carga<\/h3>\n

Cada ciclo de partida e parada introduz um pulso de choque de tra\u00e7\u00e3o na corrente, \u00e0 medida que o lado frouxo \u00e9 subitamente tensionado. As placas mais espessas da s\u00e9rie H possuem uma \u00e1rea de se\u00e7\u00e3o transversal maior e, portanto, um limite de fadiga mais elevado sob ciclos de tra\u00e7\u00e3o repetidos. Aplica\u00e7\u00f5es que realizam mais de 20 partidas e paradas por hora sob carga devem especificar a s\u00e9rie H como requisito m\u00ednimo.<\/p>\n<\/div>\n

\n

Impacto de m\u00e1quinas acopladas<\/h3>\n

Prensas de pist\u00e3o, prensas de estampagem, britadores de mand\u00edbulas e usinas de cana geram pulsos de choque agudos em suas correntes de transmiss\u00e3o. O fator de servi\u00e7o para essas aplica\u00e7\u00f5es normalmente atinge de 1,5 a 2,0 na s\u00e9rie A padr\u00e3o, tornando a s\u00e9rie H a escolha correta sem a necessidade de um passo maior ou mais fios.<\/p>\n<\/div>\n

\n

Acionamentos pesados \u200b\u200bagr\u00edcolas<\/h3>\n

Os acionamentos principais de colheitadeiras, os agitadores de palha e os acionamentos do tambor de debulha combinam altas cargas intermitentes com o impacto da ingest\u00e3o da colheita. A s\u00e9rie H \u00e9 amplamente especificada como equipamento OEM para esses acionamentos porque as placas mais espessas prolongam a vida \u00fatil em condi\u00e7\u00f5es de campo onde a substitui\u00e7\u00e3o da corrente \u00e9 cara e inconveniente.<\/p>\n<\/div>\n

\n

Ambiente de alta vibra\u00e7\u00e3o<\/h3>\n

Peneiras vibrat\u00f3rias, alimentadores vibrat\u00f3rios, transportadores vibrat\u00f3rios e britadores transmitem vibra\u00e7\u00f5es de alta frequ\u00eancia para a corrente de transmiss\u00e3o atrav\u00e9s da roda dentada e do eixo. Trincas por fadiga nas placas de liga\u00e7\u00e3o iniciam-se mais facilmente na borda do furo do pino sob tens\u00e3o alternada. A placa mais espessa da s\u00e9rie H distribui essa tens\u00e3o por uma \u00e1rea maior, resistindo ao in\u00edcio de trincas.<\/p>\n<\/div>\n

\n

Mesmas engrenagens, maior capacidade.<\/h3>\n

A s\u00e9rie H utiliza o mesmo passo que a s\u00e9rie A equivalente, portanto, encaixa nas mesmas rodas dentadas sem qualquer modifica\u00e7\u00e3o no layout da transmiss\u00e3o. Quando uma corrente padr\u00e3o da s\u00e9rie A apresentar vida \u00fatil insuficiente, a atualiza\u00e7\u00e3o para a s\u00e9rie H requer apenas a substitui\u00e7\u00e3o da corrente, sem necessidade de redesenho dos centros das rodas dentadas, eixos ou prote\u00e7\u00f5es.<\/p>\n<\/div>\n

\n

Requisitos OEM n\u00e3o padronizados<\/h3>\n

As s\u00e9ries n\u00e3o padronizadas BH e BHF s\u00e3o produzidas para substitui\u00e7\u00e3o em equipamentos originais (OEM) que foram originalmente projetados com especifica\u00e7\u00f5es de corrente propriet\u00e1rias n\u00e3o contempladas pela s\u00e9rie H padr\u00e3o. Est\u00e3o dispon\u00edveis placas laterais retas (BHF), placas flangeadas, larguras internas maiores ou posi\u00e7\u00f5es combinadas de roletes e buchas. Forne\u00e7a uma amostra da corrente ou um desenho para or\u00e7amento.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Aplica\u00e7\u00f5es<\/h2>\n
\n
\n

Maquinaria agr\u00edcola<\/h3>\n

As correntes simplex EP 40H a 100H s\u00e3o a especifica\u00e7\u00e3o padr\u00e3o para transmiss\u00f5es principais de colheitadeiras, transmiss\u00f5es de separadores de palha e transmiss\u00f5es de roscas transportadoras de gr\u00e3os. A 40H-1 \u00e9 a corrente de servi\u00e7o pesado mais utilizada em m\u00e1quinas agr\u00edcolas em todo o mundo. A maior espessura da chapa absorve o impacto da ingest\u00e3o da colheita e da entrada de pedras no mecanismo de alimenta\u00e7\u00e3o, proporcionando uma vida \u00fatil em campo aproximadamente 40% maior do que a corrente padr\u00e3o 40 equivalente nas mesmas condi\u00e7\u00f5es.<\/p>\n<\/div>\n

\n

Unidades de prensa e perfura\u00e7\u00e3o<\/h3>\n

Prensas mec\u00e2nicas, prensas de pun\u00e7\u00e3o e m\u00e1quinas de estampagem transmitem um pulso de choque agudo atrav\u00e9s da corrente de transmiss\u00e3o no momento do contato e da perfura\u00e7\u00e3o do pun\u00e7\u00e3o. Correntes simples e duplas EP 80H-1, 100H-1 e 120H-1 s\u00e3o comumente especificadas para acionamentos principais de prensas e acionamentos de volante. A se\u00e7\u00e3o transversal mais espessa da chapa resiste \u00e0 fissura\u00e7\u00e3o por fadiga que, de outra forma, se desenvolveria na borda do furo do pino sob ciclos repetidos de tens\u00e3o de alta amplitude.<\/p>\n<\/div>\n

\n

Minera\u00e7\u00e3o e extra\u00e7\u00e3o de pedreiras<\/h3>\n

Correntes EP 120H a 240H para acionamento de britadores prim\u00e1rios, peneiras vibrat\u00f3rias e alimentadores de avental em instala\u00e7\u00f5es de minera\u00e7\u00e3o e pedreiras. Os modelos duplex 120H-2 e 160H-2 s\u00e3o os tamanhos padr\u00e3o para acionamentos principais de britadores de mand\u00edbulas. A s\u00e9rie H tamb\u00e9m \u00e9 especificada para acionamentos em usinas de beneficiamento de carv\u00e3o, onde a lubrifica\u00e7\u00e3o \u00e9 contaminada por \u00e1gua e poeira de carv\u00e3o e o acionamento opera sob carga vari\u00e1vel devido \u00e0 flutua\u00e7\u00e3o da taxa de alimenta\u00e7\u00e3o de carv\u00e3o.<\/p>\n<\/div>\n

\n

Ind\u00fastria A\u00e7ucareira<\/h3>\n

Sugar mill main drives and cane elevator drives use EP heavy duty chains in the 100H to 200H range. The juice environment is highly corrosive to steel chain, and the cane ingestion load is unpredictable – a stone or dense root clump entering the mill can momentarily spike the load to several times the rated running load. The H series provides the combination of corrosion resistance (through correct lubrication specification) and fatigue strength required for these demanding tropical mill conditions.<\/p>\n<\/div>\n<\/div>\n

\"Teste<\/p>\n

Combina\u00e7\u00e3o de rodas dentadas e outros tipos de correntes<\/h2>\n
\n
\n

\"Rodas<\/p>\n

As rodas dentadas compat\u00edveis com todos os tamanhos de corrente EP est\u00e3o dispon\u00edveis no site do nosso parceiro. sprocket-chain.net<\/a>Todos os formatos de dentes ANSI B29.1 e ISO 606, simplex a 8 fios, a\u00e7o carbono C45 e a\u00e7o liga, designs de cubo com furo piloto e furo acabado.<\/p>\n

Ver rodas dentadas compat\u00edveis \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

\n

Outras cadeias<\/h3>\n
\n
\n

\"Correntes<\/p>\n

Correntes de a\u00e7o inoxid\u00e1vel<\/a><\/h3>\n

Correntes de rolos em a\u00e7o inoxid\u00e1vel SUS304 e SUS316L para ambientes aliment\u00edcios, farmac\u00eauticos e corrosivos.<\/p>\n

Alcance de visualiza\u00e7\u00e3o<\/a><\/p>\n<\/div>\n

\n

\"Correntes<\/p>\n

Cadeias Agr\u00edcolas<\/a><\/h3>\n

S\u00e9ries CA, CC e S para colheitadeiras, enfardadeiras e m\u00e1quinas para manuseio de colheitas. Norma ISO 487.<\/p>\n

Alcance de visualiza\u00e7\u00e3o<\/a><\/p>\n<\/div>\n

\n

\"Correntes<\/p>\n

Correntes de Engenharia<\/a><\/h3>\n

Correntes WH de a\u00e7o soldado, fundido e com elos redondos para transporte em cimento, minera\u00e7\u00e3o e instala\u00e7\u00f5es industriais pesadas.<\/p>\n

Alcance de visualiza\u00e7\u00e3o<\/a><\/p>\n<\/div>\n<\/div>\n

\"\"<\/div>\n<\/div>\n

Perguntas frequentes<\/h2>\n
\n
\nQual a diferen\u00e7a entre a s\u00e9rie H e a s\u00e9rie A padr\u00e3o com o mesmo passo?<\/summary>\n
The H series uses thicker link plates than the standard A series at the same pitch. For example, a standard 60 (08A) chain has a plate thickness of 2.42 mm; the 60H chain has a plate thickness of 3.25 mm – approximately 34% thicker. The larger plate cross-section gives a higher minimum tensile strength (31.8 kN versus about 31.8 kN for the standard – the gain is primarily in fatigue life and plate thickness rather than tensile strength at the smaller sizes, becoming more pronounced at 80 and above where the H series clearly outperforms the standard chain). The pin diameter and roller diameter remain the same, so H series chains run on standard pitch sprockets without any modification.<\/div>\n<\/details>\n
\nPosso usar correntes da s\u00e9rie H nas minhas engrenagens da s\u00e9rie A?<\/summary>\n
Sim, as correntes da s\u00e9rie H funcionam com rodas dentadas padr\u00e3o ANSI da s\u00e9rie A sem qualquer modifica\u00e7\u00e3o. O passo, o di\u00e2metro do rolete e a largura interna da s\u00e9rie H correspondem aos equivalentes da s\u00e9rie A com o mesmo n\u00famero de corrente. A \u00fanica dimens\u00e3o que difere \u00e9 a espessura da placa, e isso n\u00e3o afeta o engate da roda dentada, pois o formato do dente da roda dentada engata no rolete e nas placas internas, e n\u00e3o nas placas externas. As placas externas mais espessas simplesmente se projetam um pouco al\u00e9m do dente da roda dentada, o que est\u00e1 dentro da folga de projeto normal.<\/div>\n<\/details>\n
\nO que significam os c\u00f3digos de sufixo nas cadeias da s\u00e9rie BH (BH, BHF1, BHF2, etc.)?<\/summary>\n
The BH designation identifies these as heavy duty variants of the ISO B series roller chain geometry, produced by Ever-Power for specific OEM applications. The F in BHF stands for flat side plate (also called straight side plate) – a plate shape where the inner and outer plates are the same rectangular profile rather than the usual waisted figure-eight shape used in standard roller chains. The number after F identifies the specific plate profile variant (F1, F2, F3, F5 etc. are different proprietary plate dimensions used by different OEM machine manufacturers). The V suffix (as in 12BV or 60HV) identifies a chain with a specific plate profile used in high-speed applications. When ordering BH or BHF chains as replacements, always provide the complete EP chain number from the specification table and verify against a sample of the original chain.<\/div>\n<\/details>\n
\nA lubrifica\u00e7\u00e3o das correntes da s\u00e9rie H \u00e9 diferente em compara\u00e7\u00e3o com as correntes padr\u00e3o?<\/summary>\n
The lubrication requirements for H series chains are the same as for standard A series chains at the same pitch and speed – mineral oil applied at the pin-bush joint by drip oiler, bath, or spray system depending on chain speed. The lubrication method does not need to change when upgrading from A series to H series. What does sometimes change is the lubrication interval in severe applications: because the H series is typically specified for shock-loaded drives with more demanding duty cycles, more frequent oil replenishment may be required to maintain the oil film under high joint-load conditions. For drives with service factors above 1.5, consider a continuous drip oiler even at speeds below 1 m\/s.<\/div>\n<\/details>\n
\nQuais s\u00e3o os elos de liga\u00e7\u00e3o utilizados nas correntes da s\u00e9rie H?<\/summary>\n
As correntes da s\u00e9rie H utilizam elos de conex\u00e3o com pino de chaveta (pino bipartido) em vez de elos de conex\u00e3o com presilha de mola, refletindo a maior carga nas juntas em aplica\u00e7\u00f5es de servi\u00e7o pesado. O conector com pino de chaveta \u00e9 mais seguro sob cargas de impacto do que a presilha de mola, que pode se soltar se a corrente vibrar intensamente. Para correntes de 40H a 60H, um elo de conex\u00e3o com dois pinos de chaveta \u00e9 padr\u00e3o. Para correntes de 80H e superiores, um elo de conex\u00e3o aparafusado com parafusos sextavados e porcas de travamento est\u00e1 dispon\u00edvel como alternativa ao pino de chaveta para aplica\u00e7\u00f5es onde o elo de conex\u00e3o precisa ser removido e reinstalado com frequ\u00eancia. Sempre substitua o elo de conex\u00e3o a cada troca de corrente, independentemente de sua condi\u00e7\u00e3o aparente.<\/div>\n<\/details>\n
\nVoc\u00eas fornecem correntes BH e BHF n\u00e3o padronizadas para substitui\u00e7\u00e3o em m\u00e1quinas existentes?<\/summary>\n
Sim. As linhas BH e BHF s\u00e3o especificamente projetadas como substitutas OEM para m\u00e1quinas que utilizam especifica\u00e7\u00f5es de corrente n\u00e3o padronizadas. Se o n\u00famero da sua corrente constar na tabela BH ou BHF acima, forne\u00e7a o n\u00famero da corrente EP, a quantidade em metros ou o n\u00famero de elos e se \u00e9 necess\u00e1rio um elo de conex\u00e3o. Se a sua corrente n\u00e3o constar na tabela, envie uma amostra de pelo menos 5 elos conectados para medi\u00e7\u00e3o dimensional e a EP identificar\u00e1 a op\u00e7\u00e3o mais adequada ou produzir\u00e1 uma corrente personalizada de acordo com as dimens\u00f5es da sua amostra, com um pedido m\u00ednimo de 10 metros. Para substitui\u00e7\u00f5es urgentes, forne\u00e7a: passo (medido entre 10 centros de pinos consecutivos, dividido por 10), di\u00e2metro do rolete ou di\u00e2metro externo da bucha, largura interna entre as placas, di\u00e2metro do pino e espessura da placa. Fotografias da face e da borda tamb\u00e9m s\u00e3o \u00fateis para identificar o tipo de perfil da placa.<\/div>\n<\/details>\n<\/div>\n

O que dizem nossos clientes<\/h2>\n
\n
\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We upgraded our combine harvester main drive from standard 80 chain to EP 80H-1. The previous standard chains were needing replacement every harvest season. The 80H chains have now run for three full harvests with elongation at 1.6% – well within the 3% replacement threshold. The cost per season is significantly lower even though the EP 80H chain has a higher purchase price.”<\/p>\n

BK, Engenheiro de Frota<\/strong>
\nUkraine – Large Grain Farm<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our jaw crusher main drive uses 120H-2 duplex chains. We had a history of fatigue plate fractures with previous supplier chains approximately every 8 months. EP 120H-2 chains have been running for 19 months without any plate fracture or connecting link failure. The improvement is directly attributable to the consistent plate hardness across the batch – no soft spots.”<\/p>\n

AO, Superintendente de Manuten\u00e7\u00e3o<\/strong>
\nSouth Africa – Aggregate Quarry<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We needed a 12BHF2 non-standard chain to replace the original OEM specification on our packaging machine elevator drive. EP confirmed the chain from our EP chain number, delivered 5 complete circuit lengths cut and fitted with connecting links within 9 working days. The chains matched the original dimensions exactly and fitted without adjustment.”<\/p>\n

PW, Gerente de Engenharia<\/strong>
\nGermany – Food Packaging Plant<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our sugar mill drive specifies 160H-1 simplex chains for the cane elevator. The EP chains have been running through two grinding seasons in a highly corrosive juice environment with correct lubrication. Service life has exceeded our planned replacement interval and our maintenance team now standardises on EP H series across all mill drives.”<\/p>\n

RF, Engenheiro Chefe<\/strong>
\nThailand – Sugar Mill<\/p>\n<\/div>\n<\/div>\n

\n
\n

Solicite um or\u00e7amento para correntes de rolos EP Heavy Duty.<\/h3>\n

Forne\u00e7a a designa\u00e7\u00e3o da corrente (n\u00famero ANSI da s\u00e9rie H com sufixo de elo ou n\u00famero da corrente EP-BH\/BHF), a quantidade em metros ou o n\u00famero de elos e se \u00e9 necess\u00e1ria a especifica\u00e7\u00e3o do elo de fixa\u00e7\u00e3o ou de conex\u00e3o. Para correntes BH\/BHF n\u00e3o padronizadas, o n\u00famero da corrente EP da tabela acima ou uma amostra dimensional \u00e9 suficiente para a cota\u00e7\u00e3o. Nossa equipe responde em at\u00e9 um dia \u00fatil.<\/p>\n

Solicite um or\u00e7amento agora<\/a>
\nTodos os produtos da corrente de transmiss\u00e3o<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

Correntes refor\u00e7adas da s\u00e9rie H, correntes refor\u00e7adas n\u00e3o padronizadas, simplex, duplex e triplex. Placas mais espessas e pinos maiores do que a s\u00e9rie A padr\u00e3o com o mesmo passo. Passo de 9,525 mm a 76,2 mm. S\u00e9rie refor\u00e7ada Ever-Power *35H a 240H mais a gama n\u00e3o padronizada BH\/BHF.<\/p>","protected":false},"featured_media":122,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-206","product","type-product","status-publish","has-post-thumbnail","product_cat-driving-chains","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/5speedtransmission.com\/pt\/wp-json\/wp\/v2\/product\/206","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/5speedtransmission.com\/pt\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/5speedtransmission.com\/pt\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/pt\/wp-json\/wp\/v2\/comments?post=206"}],"wp:attachment":[{"href":"https:\/\/5speedtransmission.com\/pt\/wp-json\/wp\/v2\/media?parent=206"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/5speedtransmission.com\/pt\/wp-json\/wp\/v2\/product_brand?post=206"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/5speedtransmission.com\/pt\/wp-json\/wp\/v2\/product_cat?post=206"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/5speedtransmission.com\/pt\/wp-json\/wp\/v2\/product_tag?post=206"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}