{"id":218,"date":"2026-07-24T07:31:08","date_gmt":"2026-07-24T07:31:08","guid":{"rendered":"https:\/\/5speedtransmission.com\/?post_type=product&p=218"},"modified":"2026-07-24T07:31:08","modified_gmt":"2026-07-24T07:31:08","slug":"anti-backbend-chains-for-pushing-window","status":"publish","type":"product","link":"https:\/\/5speedtransmission.com\/id\/produk\/anti-backbend-chains-for-pushing-window\/","title":{"rendered":"Rantai Anti-Tekuk Punggung untuk Mendorong Jendela"},"content":{"rendered":"
\n
\n
\n

9 Model<\/p>\n

06BF \/ 08BF \/ 415BF \/ 16AF<\/p>\n<\/div>\n

\n

9,525 hingga 25,4 mm<\/p>\n

Rentang Nada<\/p>\n<\/div>\n

\n

Dorong dan Tarik<\/p>\n

Dorongan Kaku \/ Tarikan Fleksibel<\/p>\n<\/div>\n

\n

ISO 9001<\/p>\n

Kualitas Tersertifikasi<\/p>\n<\/div>\n<\/div>\n

Anti-Backbend Push Chain – Product Overview<\/h2>\n
\n
\n

Kekuatan Abadi rantai anti-tekuk punggung untuk mendorong jendela<\/a> are a specialised family of roller chains designed to transmit both push and pull forces along the chain axis without buckling. A conventional roller chain is fully flexible in both directions – it can be pulled under tension but will buckle immediately if a compressive (push) force is applied. An anti-backbend chain is engineered with extended outer link plates and an interlocking plate geometry that prevents the chain from bending backward beyond the straight position, effectively turning the chain into a rigid push rod when loaded in compression while retaining normal articulation in the pulling direction.<\/p>\n

The anti-backbend function is achieved through the plate geometry. The outer link plates in the EP push chain range are formed with a stepped or extended profile that bears against the adjacent inner link plates when the chain is in the straight (tensioned or compressed) configuration. This contact between plates prevents back-articulation – the chain cannot bend in the direction that would be compressive buckling. As the chain is fed out from the sprocket in the push direction, the interlocked plates form a rigid column capable of transmitting the compressive load through the chain length to the driven component. When the chain is retracted, the plates separate and the chain becomes fully flexible again, allowing it to coil or store in a compact magazine behind the sprocket.<\/p>\n

The primary application of EP anti-backbend push chains is in window actuator systems – automatic openers for roof lights, skylights, clerestory windows, industrial ventilation louvres, smoke control ventilators, and architectural glazing systems. In these applications, the window actuator motor drives a sprocket that feeds the chain out through a guide tube to push the window open, then retracts the chain to pull the window closed. The chain must be rigid enough in the push direction to push the window open against its own weight, wind pressure, and any sealing resistance, while flexible enough in the pull direction to store compactly in the actuator housing.<\/p>\n

The EP range covers nine models from EP-06BF34 at 9.525 mm pitch through EP-16AF101 at 25.400 mm pitch. Models marked with an asterisk (*) are bush chains – the d1 dimension in the specification table is the external diameter of the bush rather than an outer roller. The H and h dimensions in the specification table describe the outer link plate profile: H is the overall plate height (including the anti-backbend extension plate) and h is the standard plate depth within the chain height, both of which affect the guide tube or channel dimensions required to support the chain in service.<\/p>\n

 <\/p>\n<\/div>\n

\"Rantai<\/p>\n<\/div>\n<\/div>\n
\n

Keterangan dimensi:<\/strong> P = Jarak antar rol (mm) | d1 maks = Diameter rol maks (rantai bushing: diameter bushing luar) | b1 min = Lebar dalam antar pelat min | d2 maks = Diameter pin maks | L maks = Panjang pin maks | H maks = Tinggi pelat keseluruhan maks (profil pelat anti-tekuk balik luar) | h maks = Kedalaman pelat standar maks | t\/T maks = Ketebalan pelat dalam\/luar maks | Q min = Kekuatan tarik min. kN\/lbf | q = Berat kg\/m | * = Rantai bushing (d1 adalah diameter bushing luar)<\/p>\n<\/div>\n

\"Rantai<\/p>\n

Spesifikasi Rantai Dorong Anti-Tekuk Punggung<\/h2>\n

Semua dimensi dalam mm. Model yang ditandai * adalah rantai semak. Q min = kekuatan tarik minimum; q = berat per meter. H dan h adalah kolom dimensi pelat dari gambar spesifikasi (H = tinggi pelat keseluruhan, h = kedalaman pelat bagian dalam).<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Model EP<\/th>\nP (mm)<\/th>\nd1 maks (mm)<\/th>\nb1 menit (mm)<\/th>\nd2 maks (mm)<\/th>\nL maks (mm)<\/th>\nH maks (mm)<\/th>\nh maks (mm)<\/th>\nt\/T maks (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
EP-06BF34<\/td>\n9.525<\/td>\n6.35<\/td>\n3.80<\/td>\n3.28<\/td>\n10.00<\/td>\n12.38<\/td>\n7.88<\/td>\n1.04<\/td>\n7.0\/1574<\/td>\n0.47<\/td>\n<\/tr>\n
EP-*06CF22<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n11.60<\/td>\n12.86<\/td>\n8.38<\/td>\n1.30<\/td>\n7.9\/1776<\/td>\n0.51<\/td>\n<\/tr>\n
EP-*06CF30<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n13.90<\/td>\n13.05<\/td>\n8.55<\/td>\n2.03\/1.25<\/td>\n7.9\/1776<\/td>\n0.71<\/td>\n<\/tr>\n
EP-*P9.525F1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n11.60<\/td>\n13.00<\/td>\n8.55<\/td>\n1.30<\/td>\n7.9\/1776<\/td>\n0.57<\/td>\n<\/tr>\n
EP-08BF6<\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n16.60<\/td>\n17.00<\/td>\n11.00<\/td>\n1.50<\/td>\n13.8\/3102<\/td>\n0.91<\/td>\n<\/tr>\n
EP-415BF4<\/td>\n12.700<\/td>\n7.75<\/td>\n4.88<\/td>\n4.09<\/td>\n16.40<\/td>\n17.00<\/td>\n11.00<\/td>\n1.3\/3.1<\/td>\n12.0\/2698<\/td>\n1.07<\/td>\n<\/tr>\n
EP-P12.7F4<\/td>\n12.700<\/td>\n7.50<\/td>\n5.50<\/td>\n4.45<\/td>\n15.60<\/td>\n14.30<\/td>\n8.50<\/td>\n2.03<\/td>\n15.0\/3372<\/td>\n0.99<\/td>\n<\/tr>\n
EP-08BF20<\/td>\n12.700<\/td>\n8.51<\/td>\n7.75<\/td>\n4.45<\/td>\n16.70<\/td>\n16.50<\/td>\n10.50<\/td>\n1.60<\/td>\n18.0\/4046<\/td>\n1.04<\/td>\n<\/tr>\n
EP-08BF208<\/td>\n12.700<\/td>\n8.51<\/td>\n7.75<\/td>\n4.45<\/td>\n17.00<\/td>\n16.50<\/td>\n10.50<\/td>\n1.60<\/td>\n10.0\/2248<\/td>\n1.06<\/td>\n<\/tr>\n
EP-16AF101<\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n32.70<\/td>\n26.90<\/td>\n14.80<\/td>\n3.25<\/td>\n56.7\/12746<\/td>\n3.45<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

\"\"<\/p>\n

\n

Anti-Backbend Push Chain – Key Technical Features<\/h2>\n
\n
\n

Geometri Pelat Anti-Tekuk Balik<\/h3>\n

The extended outer link plates bear against adjacent inner link plates when the chain is in the straight configuration, blocking back-articulation and preventing compressive buckling. The chain is fully rigid in the push direction and normally flexible in the pull direction. This dual behaviour – rigid rod when pushed, flexible chain when pulled – enables a single chain to both push a load open and pull it closed from the same actuator without a separate push mechanism.<\/p>\n<\/div>\n

\n

Penyimpanan Ringkas dalam Posisi Terlipat<\/h3>\n

Saat aktuator jendela menarik kembali rantai, artikulasi rantai normal kembali dan rantai terlipat secara ringkas ke dalam wadah aktuator atau saluran penyimpanan di belakang sproket penggerak. Rumah aktuator dapat jauh lebih pendek daripada langkah pembukaan jendela maksimum, karena rantai disimpan dalam konfigurasi terlipat daripada tetap memanjang. EP-06BF34 dengan jarak antar mata rantai 9,525 mm dan EP-08BF6 dengan jarak antar mata rantai 12,700 mm adalah ukuran yang paling umum untuk aktuator jendela perumahan kompak dan komersial ringan.<\/p>\n<\/div>\n

\n

Panduan Kompatibilitas Saluran dan Tabung<\/h3>\n

Rantai anti-tekuk balik EP dirancang untuk beroperasi di dalam saluran atau tabung pemandu yang menopang rantai sepanjang panjang dorongnya, mencegah tekuk lateral di bawah beban tekan yang tinggi. Dimensi H dan h dalam tabel spesifikasi adalah parameter kunci untuk menentukan ukuran penampang saluran pemandu. H menunjukkan tinggi rantai keseluruhan termasuk ekstensi pelat anti-tekuk balik, dan h menunjukkan kedalaman pelat bagian dalam. Lubang saluran pemandu harus melewati H pada sumbu tinggi rantai dan b1 (ditambah tonjolan pin) pada sumbu lebar rantai agar memungkinkan pergerakan yang lancar tanpa hambatan.<\/p>\n<\/div>\n

\n

Varian Rantai Semak<\/h3>\n

Models marked * – EP-*06CF22, EP-*06CF30, and EP-*P9.525F1 – are bush chain (sleeve chain) variants where no separate outer roller is fitted. The d1 dimension for these models is the external diameter of the bush, not an outer roller. Bush chain variants are lighter than roller chain equivalents at the same pitch and are used where roller wear from sprocket engagement is not a concern due to the low cycle count of typical window actuator applications. The absence of the outer roller also reduces the overall chain height slightly.<\/p>\n<\/div>\n

\n

Low Maintenance – Low Cycle Application<\/h3>\n

Window actuator push chains operate at very low cycle rates – typically 1 to 10 open-close operations per day – and at very low speeds (0.01 to 0.1 m\/s chain speed). These characteristics mean that lubrication requirements are minimal and chain wear is negligible under normal operating conditions. The EP push chain range is supplied pre-lubricated and requires no additional lubrication for normal building ventilation applications. For industrial applications with higher cycle rates, periodic light mineral oil application to the joint areas is recommended.<\/p>\n<\/div>\n

\n

Opsi Tahan Korosi<\/h3>\n

Window actuator chains are frequently installed in humid, coastal, or chemically challenging environments – pool enclosures, conservatories, marine buildings, and industrial facilities with chemical atmospheres. EP push chains in the 06BF and 08BF series are available in stainless steel (SUS304 or SUS316L) on request for these environments. Nickel-plated carbon steel variants are also available for moderate corrosion resistance at lower cost. Please specify the required surface treatment or material grade when requesting a quotation.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Aplikasi<\/h2>\n
\n
\n

Jendela Atap, Jendela Langit-langit dan Jendela Atas<\/h3>\n

Rantai dorong EP-06BF34, EP-*06CF22, dan EP-08BF6 adalah spesifikasi standar untuk aktuator atap dan skylight bermotor di bangunan perumahan, komersial, dan institusional. Aktuator biasanya dipasang di ujung engsel atap, dan rantai mendorong sepanjang profil rangka untuk membuka panel kaca melawan gravitasi dan tekanan angin. Penyimpanan rantai yang dilipat dan ringkas memungkinkan rumah aktuator yang ramping yang sesuai dengan profil rangka sempit dari sistem atap modern.<\/p>\n<\/div>\n

\n

Sistem Ventilasi Asap dan Keselamatan Kebakaran<\/h3>\n

Ventilator asap otomatis dan sistem pembukaan ventilasi yang dipicu api menggunakan rantai dorong EP pada seri 08BF dan P12.7F karena kekuatan tarik dan daya dorongnya yang lebih tinggi. Dalam aplikasi ventilasi asap, aktuator harus dapat menahan ventilasi agar tetap tertutup rapat terhadap angin selama kondisi normal, kemudian membukanya dengan cepat dan menahannya agar tetap terbuka sepenuhnya terhadap beban angin selama kebakaran. Geometri penguncian anti-tekuk balik memberikan kekakuan struktural yang dibutuhkan untuk mempertahankan posisi terbuka di bawah beban angin lateral tanpa memerlukan perangkat penahan terbuka mekanis terpisah.<\/p>\n<\/div>\n

\n

Aktuator Ventilasi dan Kisi-kisi Industri<\/h3>\n

Rantai EP-08BF20, EP-P12.7F4, dan EP-16AF101 digunakan untuk penggerak kisi-kisi ventilasi bangunan industri, panel ventilasi bangunan pertanian, pembuka ventilasi atap rumah kaca, dan jendela bermotor format besar di pabrik dan gudang. EP-16AF101 dengan jarak antar mata rantai 25,4 mm dan kekuatan tarik minimum 56,7 kN adalah pilihan tepat untuk aplikasi aktuator industri dengan gaya tinggi di mana area jendela atau kisi-kisi besar, beban angin signifikan, atau beberapa ventilasi harus digerakkan dari satu rangkaian rantai.<\/p>\n<\/div>\n<\/div>\n

\"Produksi<\/p>\n

Mencocokkan Sproket dan Jenis Rantai Lainnya<\/h2>\n
\n
\n

\"Sproket<\/p>\n

Sproket penggerak yang sesuai untuk rantai dorong anti-tekuk balik EP, termasuk roda gigi pinion kelas aktuator dan rakitan poros sproket, tersedia melalui situs mitra kami. sprocket-chain.net<\/a>.<\/p>\n

Lihat Sproket yang Cocok \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\n
\n

Rantai Lainnya<\/h3>\n
\n
\n

\"Rantai<\/p>\n

Rantai Baja Tahan Karat<\/a><\/h3>\n

Rantai rol SUS304 dan SUS316L untuk lingkungan makanan, farmasi, dan korosif.<\/p>\n

Rentang Tampilan<\/a><\/p>\n<\/div>\n

\n

\"Rantai<\/p>\n

Rantai Pertanian<\/a><\/h3>\n

Seri CA, CC, dan S untuk mesin pemanen gabungan, mesin pengepak jerami, dan mesin pengolah hasil panen. Standar ISO 487.<\/p>\n

Rentang Tampilan<\/a><\/p>\n<\/div>\n

\n

\"Rantai<\/p>\n

Rantai Teknik<\/a><\/h3>\n

Rantai baja las, cor, dan rantai bulat WH untuk pengangkutan semen, pertambangan, dan alat berat.<\/p>\n

Rentang Tampilan<\/a><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/div>\n<\/div>\n

Pertanyaan yang Sering Diajukan<\/h2>\n
\n
\nBagaimana rantai anti-tekuk balik mentransmisikan gaya dorong tanpa menekuk?<\/summary>\n
A standard roller chain buckles immediately under any compressive load because the joints are free to articulate in both directions. An anti-backbend chain is prevented from bending in the reverse (back) direction by the geometry of the outer link plates, which are extended or stepped so that they physically bear against the inner link plates at the straight configuration. When a compressive load is applied – the motor pushes the chain – the chain cannot bend backward and instead transmits the compressive force along the chain length as a rigid column. The guide channel or tube surrounding the chain provides lateral support to prevent the chain from buckling sideways under load, completing the push force transmission path to the driven window or louvre.<\/div>\n<\/details>\n
\nBerapa dimensi saluran pemandu yang saya butuhkan untuk rantai tertentu?<\/summary>\n
The guide channel cross-section must clear the full chain profile. The minimum channel height clearance is the H max dimension from the specification table plus 0.5 mm running clearance on each side (H max + 1.0 mm total height). The minimum channel width clearance is the pin length L max plus 0.5 mm running clearance on each side (L max + 1.0 mm total width). For example, EP-08BF6 has H max 17.00 mm and L max 16.60 mm, requiring a channel of at least 18.0 mm height by 17.6 mm width. For applications with significant chain speed or vibration, increase the clearance to 1.0 mm on each side. The channel must be smooth-bore on the inner surfaces and straight along the push axis – any bow in the channel will cause the chain to bind under compressive load.<\/div>\n<\/details>\n
\nBerapakah gaya dorong maksimum yang dapat ditransmisikan oleh rantai tertentu?<\/summary>\n
Gaya dorong maksimum dibatasi oleh kekuatan tekuk kolom sistem rantai-dalam-pemandu, bukan oleh kekuatan tarik rantai. Kekuatan kolom bergantung pada panjang rantai yang tidak ditopang antara titik keluar pemandu dan titik beban (bingkai jendela), kekakuan penampang rantai, dan kondisi ujungnya. Untuk sebagian besar aplikasi aktuator jendela, panjang yang tidak ditopang sangat pendek (kurang dari 50 mm) dan titik keluar pemandu dekat dengan bingkai jendela, sehingga kekuatan kolom sangat tinggi relatif terhadap gaya dorong yang dibutuhkan. Jika panjang yang tidak ditopang lebih panjang, rantai dengan dimensi H yang lebih besar (profil pelat yang lebih tinggi) harus digunakan karena memiliki kekakuan penampang yang lebih besar. Hubungi EP dengan geometri aktuator Anda dan gaya dorong yang dibutuhkan untuk mendapatkan rekomendasi.<\/div>\n<\/details>\n
\nBisakah rantai pasokan EP memenuhi spesifikasi OEM aktuator yang ada?<\/summary>\n
Yes. The models in the specification table cover the most widely used anti-backbend chain specifications in the window actuator industry. For actuators from major OEM manufacturers such as Sommer, Geze, Tormax, Raico, and others, please supply the existing chain designation or a chain sample so EP can verify the dimensional match. Key dimensions to verify are pitch, roller or bush diameter, inner width (b1), pin diameter (d2), pin length (L), and overall plate height (H). EP can also produce custom anti-backbend chain configurations outside the standard table if the required quantity justifies a tooling investment – minimum order for custom configurations is typically 200 metres.<\/div>\n<\/details>\n
\nApa perbedaan antara EP-08BF20 dan EP-08BF208?<\/summary>\n
Baik EP-08BF20 maupun EP-08BF208 memiliki ukuran pitch (12.700 mm), diameter roller (8.51 mm), lebar dalam (7.75 mm), diameter pin (4.45 mm), dan tinggi pelat yang sama. Perbedaannya terletak pada kekuatan tarik minimum: EP-08BF20 memiliki kekuatan tarik 18.0 kN\/4046 lbf dan EP-08BF208 memiliki kekuatan tarik 10.0 kN\/2248 lbf. Hal ini mencerminkan perbedaan ketebalan pelat atau perlakuan material pelat antara kedua model tersebut. EP-08BF208 dirancang untuk aplikasi beban rendah atau untuk aktuator yang desain aslinya menggunakan spesifikasi pelat yang lebih ringan. EP-08BF20 adalah pilihan dengan kekuatan lebih tinggi untuk aplikasi yang membutuhkan kapasitas gaya dorong dan tarik yang lebih besar. Panjang pin EP-08BF208 (17,00 mm) juga sedikit lebih panjang daripada EP-08BF20 (16,70 mm), yang memengaruhi ukuran lebar saluran pemandu.<\/div>\n<\/details>\n
\nBerapa panjang rantai yang harus saya pesan dan bagaimana cara penyimpanan rantai tersebut?<\/summary>\n
The required chain length is the full push stroke of the actuator plus the storage length in the magazine plus the wrap around the drive sprocket plus a short tail for the chain anchor point. In practice, the actuator manufacturer specifies the chain length for their product as part of the system design – for OEM actuator replacement chains, simply order the length specified in the actuator service documentation. For new actuator designs, add approximately 20% to the maximum opening stroke to allow for sprocket wrap and storage tail. The chain stores in the magazine by normal chain articulation – the retracted chain folds back on itself at the sprocket exit with a bend radius equal to approximately 3 to 4 times the chain pitch, so the magazine depth must be at least this distance from the sprocket centreline.<\/div>\n<\/details>\n<\/div>\n

Apa Kata Pelanggan Kami<\/h2>\n
\n
\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We manufacture electric window actuators for commercial and institutional buildings. EP-08BF6 chains are now our standard specification for mid-range actuators. The dimensional consistency batch to batch is excellent – our assembly line runs with zero fit adjustments. We have shipped over 3,000 actuator units using EP chains in the last 18 months with no field failures attributable to chain quality.”<\/p>\n

AM, Manajer Produksi<\/strong>
\nPoland – Window Actuator Manufacturer<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We specify EP-16AF101 for our heavy industrial ventilation louvre drives on factory buildings. The 56 kN tensile rating gives us comfortable safety margin for large louvre panels in high-wind locations. The chain has been running on a coastal cement works installation for 4 years with minimal wear. We apply light oil at the annual service visit and nothing more.”<\/p>\n

Kepada, Direktur Teknis<\/strong>
\nUK – Industrial Ventilation Specialist<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“EP-*06CF30 chains for our compact roof light actuators. The bush chain variant allows a slimmer guide channel than a roller chain equivalent, which is important for our slim-profile product line. EP verified the chain against our sample within 2 working days and delivered 500 metres of cut-to-length chains within the week. Exactly what we needed for a product launch deadline.”<\/p>\n

SL, Insinyur Desain<\/strong>
\nDenmark – Roof Light Manufacturer<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We supply smoke ventilator replacement chains to the UK market. EP-08BF20 covers the majority of the field installations we encounter. The chains arrive clearly labelled with batch and dimensional data on the delivery documentation, which our service engineers need for job records. A reliable supplier for a critical life safety application.”<\/p>\n

RP, Direktur Operasi<\/strong>
\nUK – Smoke Ventilation Service Company<\/p>\n<\/div>\n<\/div>\n

\n

\"\"<\/p>\n

\n

Minta Penawaran Harga untuk Rantai Dorong Anti-Tekuk Punggung EP<\/h3>\n

Cantumkan model rantai EP dari tabel spesifikasi, jumlah dalam meter, dan apakah diperlukan potongan siap pakai dengan mata rantai penghubung. Untuk penggantian aktuator OEM, berikan merek dan model aktuator atau contoh rantai yang ada. Varian baja tahan karat dan berlapis nikel tersedia berdasarkan permintaan. Tim kami akan merespons dalam satu hari kerja.<\/p>\n

Dapatkan Penawaran Sekarang<\/a>
\nSemua Produk Rantai Penggerak<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

Seri rantai dorong EP-06BF, EP-08BF, EP-415BF, EP-P12.7F, EP-08BF208, dan EP-16AF. Kaku dalam arah dorong, fleksibel dalam arah tarik. Jarak antar gigi 9,525 mm hingga 25,400 mm. Untuk aktuator jendela otomatis, penggerak jendela atap, sistem kisi-kisi, dan kontrol ventilasi arsitektur.<\/p>","protected":false},"featured_media":212,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-218","product","type-product","status-publish","has-post-thumbnail","product_cat-driving-chains","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/product\/218","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/comments?post=218"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/media\/212"}],"wp:attachment":[{"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/media?parent=218"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/product_brand?post=218"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/product_cat?post=218"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/5speedtransmission.com\/id\/wp-json\/wp\/v2\/product_tag?post=218"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}