{"id":206,"date":"2026-07-24T06:13:54","date_gmt":"2026-07-24T06:13:54","guid":{"rendered":"https:\/\/5speedtransmission.com\/?post_type=product&p=206"},"modified":"2026-07-24T06:13:54","modified_gmt":"2026-07-24T06:13:54","slug":"heavy-duty-series-roller-chains","status":"publish","type":"product","link":"https:\/\/5speedtransmission.com\/fr\/produit\/heavy-duty-series-roller-chains\/","title":{"rendered":"Cha\u00eenes \u00e0 rouleaux de la s\u00e9rie renforc\u00e9e"},"content":{"rendered":"
\n
\n
\n

S\u00e9rie H<\/p>\n

et BH \/ BHF Non-Standard<\/p>\n<\/div>\n

\n

9,525 \u00e0 76,2 mm<\/p>\n

Gamme de hauteur<\/p>\n<\/div>\n

\n

Jusqu'\u00e0 1 650 kN<\/p>\n

Charge de rupture du triplex<\/p>\n<\/div>\n

\n

ISO 9001<\/p>\n

Qualit\u00e9 certifi\u00e9e<\/p>\n<\/div>\n<\/div>\n

Heavy Duty Roller Chain – Product Overview<\/h2>\n
\n
\n

La Cor\u00e9e toujours puissante cha\u00eenes \u00e0 rouleaux de la s\u00e9rie renforc\u00e9e<\/a> are an uprated variant of the standard short pitch roller chain range, designed for applications where the operating load, shock loading severity, or duty cycle exceeds what the standard A series can comfortably handle at the same pitch. The heavy duty designation refers to thicker link plates – typically 25% to 40% heavier than the standard A series plate at the same pitch – combined with larger diameter pins and in some sizes an increased inner width, all while maintaining the same pitch so that the chain can run on standard pitch sprockets without any modification to the sprocket or drive configuration.<\/p>\n

La s\u00e9rie EP H propose des cha\u00eenes de tailles 35H \u00e0 240H, en configurations simplex (un brin, suffixe -1), duplex (deux brins, suffixe -2) et triplex (trois brins, suffixe -3). Le suffixe H est la d\u00e9signation standard du secteur pour la g\u00e9om\u00e9trie renforc\u00e9e des maillons\u00a0: une cha\u00eene 35H poss\u00e8de le m\u00eame pas de 9,525\u00a0mm et le m\u00eame diam\u00e8tre de rouleau qu\u2019une cha\u00eene 35 standard, mais ses maillons sont plus \u00e9pais, ce qui lui conf\u00e8re une r\u00e9sistance \u00e0 la traction et une dur\u00e9e de vie en fatigue sup\u00e9rieures sous charges r\u00e9p\u00e9t\u00e9es. Ceci est crucial pour des applications telles que les transmissions principales de moissonneuses-batteuses, les transmissions de plateaux de chargement de grumes, les transmissions principales de machines d\u2019emballage et les transmissions industrielles g\u00e9n\u00e9rales qui d\u00e9marrent et s\u2019arr\u00eatent sous charge, subissent des vibrations dues aux machines coupl\u00e9es ou doivent absorber les chocs g\u00e9n\u00e9r\u00e9s par la reprise brutale de la cha\u00eene lors d\u2019une inversion de charge.<\/p>\n

Beyond the standard H series, Korea Ever-Power manufactures a comprehensive range of non-standard heavy duty chains under the BH and BHF designations. These are chains developed for specific OEM applications where neither the standard A series nor the standard H series geometry exactly matches the sprocket tooth form or structural requirement of the original equipment. The BH range includes straight side plate variants (where the inner and outer plates are the same flat profile rather than the usual waisted figure-eight shape), flanged plate variants for guide track applications, and combination chains with mixed roller and bush positions for specific machine functions. Bush chains within both the H series and the BH range are marked with an asterisk (*) – for these chains the d1 dimension in the specification table refers to the external diameter of the bush rather than an outer roller diameter, because no separate outer roller is fitted.<\/p>\n

La ligne de production de cha\u00eenes renforc\u00e9es Korea Ever-Power utilise les m\u00eames proc\u00e9d\u00e9s de formage \u00e0 froid et de traitement thermique que la s\u00e9rie A, avec des axes en acier alli\u00e9 tremp\u00e9, des bagues c\u00e9ment\u00e9es et des plaques trait\u00e9es thermiquement. Les sections de plaques plus \u00e9paisses de la s\u00e9rie H n\u00e9cessitent des cycles de traitement thermique plus longs pour obtenir des propri\u00e9t\u00e9s de noyau uniformes, et les diam\u00e8tres d'axe plus importants exigent un contr\u00f4le dimensionnel plus pr\u00e9cis lors de la rectification afin de maintenir le jeu axe-bague optimal pour une bonne lubrification. Une pr\u00e9charge est appliqu\u00e9e \u00e0 chaque cha\u00eene assembl\u00e9e de la s\u00e9rie H avant la mesure du pas afin d'\u00e9liminer l'allongement d\u00fb \u00e0 l'installation, de la m\u00eame mani\u00e8re que pour la gamme standard de la s\u00e9rie A. Les maillons de jonction de la s\u00e9rie H sont retenus par une goupille fendue ou une goupille de s\u00e9curit\u00e9 plut\u00f4t que par un clip \u00e0 ressort comme sur les cha\u00eenes standard plus l\u00e9g\u00e8res, ce qui refl\u00e8te les contraintes plus \u00e9lev\u00e9es sur les articulations en service intensif.<\/p>\n<\/div>\n

\"Cha\u00eene<\/div>\n<\/div>\n
\n

L\u00e9gende des dimensions\u00a0:<\/strong> P = Pas | d1 = Diam\u00e8tre max. des rouleaux (cha\u00eene \u00e0 douilles : diam\u00e8tre ext\u00e9rieur de la douille) | b1 = Largeur int\u00e9rieure min. entre les plaques | d2 = Diam\u00e8tre max. des axes | L = Longueur max. des axes | Lc = Longueur max. des axes de connexion | h2 = Profondeur max. des plaques int\u00e9rieures | T = \u00c9paisseur max. des plaques | Pt = Pas transversal (duplex\/triplex) | Q = R\u00e9sistance \u00e0 la traction min. kN\/lbf | Q0 = R\u00e9sistance \u00e0 la traction moyenne kN | q = Poids kg\/m | * = Cha\u00eene \u00e0 douilles | F = Plaques lat\u00e9rales droites (plates)<\/p>\n<\/div>\n

H Series Simplex – Single Strand (suffix -1)<\/h2>\n

G\u00e9om\u00e9trie des plaques renforc\u00e9e. Pas identique \u00e0 celui des cha\u00eenes de la s\u00e9rie ANSI A. Des plaques plus \u00e9paisses et des axes plus larges offrent une r\u00e9sistance \u00e0 la traction et une dur\u00e9e de vie en fatigue sup\u00e9rieures sous charges de choc. Les cha\u00eenes marqu\u00e9es d'un ast\u00e9risque (*) sont des cha\u00eenes \u00e0 douilles.<\/p>\n

\"dimension<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
N\u00b0 ISO\/ANSI<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nT max<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
EP-*35H-1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n13.3<\/td>\n14.3<\/td>\n9.00<\/td>\n1.50<\/td>\n7.9\/1795<\/td>\n10.8<\/td>\n0.41<\/td>\n<\/tr>\n
40H-1<\/strong><\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.00<\/td>\n2.03<\/td>\n14.1\/3205<\/td>\n19.1<\/td>\n0.82<\/td>\n<\/tr>\n
50H-1<\/strong><\/td>\n15.875<\/td>\n10.16<\/td>\n9.40<\/td>\n5.08<\/td>\n22.1<\/td>\n23.4<\/td>\n15.09<\/td>\n2.42<\/td>\n22.2\/5045<\/td>\n30.2<\/td>\n1.25<\/td>\n<\/tr>\n
60H-1<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.00<\/td>\n3.25<\/td>\n31.8\/7227<\/td>\n42.7<\/td>\n1.87<\/td>\n<\/tr>\n
80H-1<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n36.2<\/td>\n37.7<\/td>\n24.00<\/td>\n4.00<\/td>\n56.7\/12886<\/td>\n71.4<\/td>\n3.10<\/td>\n<\/tr>\n
100H-1<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n43.6<\/td>\n46.9<\/td>\n30.00<\/td>\n4.80<\/td>\n88.5\/20114<\/td>\n112.4<\/td>\n4.52<\/td>\n<\/tr>\n
120H-1<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n53.5<\/td>\n57.5<\/td>\n35.70<\/td>\n5.60<\/td>\n127.0\/28864<\/td>\n160.9<\/td>\n6.60<\/td>\n<\/tr>\n
140H-1<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n57.6<\/td>\n62.2<\/td>\n41.00<\/td>\n6.40<\/td>\n172.4\/39182<\/td>\n217.3<\/td>\n8.30<\/td>\n<\/tr>\n
160H-1<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n68.2<\/td>\n73.0<\/td>\n47.80<\/td>\n7.20<\/td>\n226.8\/51545<\/td>\n285.8<\/td>\n10.30<\/td>\n<\/tr>\n
180H-1<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n75.9<\/td>\n81.6<\/td>\n53.60<\/td>\n8.00<\/td>\n281.0\/63863<\/td>\n341.8<\/td>\n14.83<\/td>\n<\/tr>\n
200H-1<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n86.6<\/td>\n93.5<\/td>\n60.00<\/td>\n9.50<\/td>\n353.8\/80409<\/td>\n444.5<\/td>\n19.16<\/td>\n<\/tr>\n
240H-1<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n109.6<\/td>\n115.9<\/td>\n72.30<\/td>\n12.70<\/td>\n510.3\/115977<\/td>\n622.5<\/td>\n30.40<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Duplex – Two Strand (suffix -2)<\/h2>\n

Les cha\u00eenes duplex renforc\u00e9es doublent la capacit\u00e9 de charge \u00e0 pas \u00e9gal. Pt = pas transversal entre les centres des brins. Disponibles avec des pas de 60H \u00e0 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
N\u00b0 ISO\/ANSI<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nT max<\/th>\nPt (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
60H-2<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n55.3<\/td>\n57.1<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n63.6\/14455<\/td>\n84.5<\/td>\n3.71<\/td>\n<\/tr>\n
80H-2<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n68.8<\/td>\n70.3<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n113.4\/25773<\/td>\n145.3<\/td>\n6.15<\/td>\n<\/tr>\n
100H-2<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n82.7<\/td>\n86.0<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n177.0\/40227<\/td>\n225.9<\/td>\n9.03<\/td>\n<\/tr>\n
120H-2<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n102.4<\/td>\n106.4<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n254.0\/57727<\/td>\n322.7<\/td>\n13.13<\/td>\n<\/tr>\n
140H-2<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n109.8<\/td>\n114.4<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n344.8\/78364<\/td>\n437.7<\/td>\n16.60<\/td>\n<\/tr>\n
160H-2<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n130.1<\/td>\n134.9<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n453.6\/103091<\/td>\n571.6<\/td>\n20.20<\/td>\n<\/tr>\n
180H-2<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n146.5<\/td>\n155.6<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n562\/127726<\/td>\n680.0<\/td>\n29.20<\/td>\n<\/tr>\n
200H-2<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n164.9<\/td>\n171.8<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n707.6\/160818<\/td>\n894.9<\/td>\n38.11<\/td>\n<\/tr>\n
240H-2<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n212.6<\/td>\n223.1<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1000\/227270<\/td>\n1200.0<\/td>\n60.50<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Triplex – Three Strand (suffix -3)<\/h2>\n

Cha\u00eenes triplex renforc\u00e9es, capacit\u00e9 de charge tripl\u00e9e. Le point de contact s'applique entre chaque paire de brins adjacents. Disponibles avec un pas de 60H \u00e0 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
N\u00b0 ISO\/ANSI<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nT max<\/th>\nPt (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
60H-3<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n81.4<\/td>\n83.2<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n95.4\/21682<\/td>\n113.9<\/td>\n5.54<\/td>\n<\/tr>\n
80H-3<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n101.4<\/td>\n102.9<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n170.1\/38659<\/td>\n203.5<\/td>\n9.42<\/td>\n<\/tr>\n
100H-3<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n121.8<\/td>\n125.1<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n265.5\/60341<\/td>\n314.8<\/td>\n12.96<\/td>\n<\/tr>\n
120H-3<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n151.2<\/td>\n155.2<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n381.0\/86591<\/td>\n444.7<\/td>\n19.64<\/td>\n<\/tr>\n
140H-3<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n162.0<\/td>\n166.6<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n517.2\/117545<\/td>\n598.4<\/td>\n24.90<\/td>\n<\/tr>\n
160H-3<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n192.0<\/td>\n196.8<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n680.4\/154636<\/td>\n787.3<\/td>\n30.10<\/td>\n<\/tr>\n
180H-3<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n215.7<\/td>\n224.8<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n843\/191589<\/td>\n1011.0<\/td>\n44.10<\/td>\n<\/tr>\n
200H-3<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n243.2<\/td>\n250.1<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n1061.4\/241227<\/td>\n1228.2<\/td>\n57.06<\/td>\n<\/tr>\n
240H-3<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n313.8<\/td>\n324.3<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1500\/340905<\/td>\n1650.0<\/td>\n91.00<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Cha\u00eenes robustes non standard (s\u00e9ries BH \/ BHF)<\/h2>\n

Cha\u00eenes renforc\u00e9es non standard, fabriqu\u00e9es selon la num\u00e9rotation EP pour des applications OEM sp\u00e9cifiques. Inclut des variantes \u00e0 flasques droites (marqu\u00e9es F), \u00e0 flasques \u00e9vas\u00e9es et des mod\u00e8les combin\u00e9s. * indique une cha\u00eene \u00e0 douilles\u00a0; d1 correspond au diam\u00e8tre ext\u00e9rieur de la douille. F indique des flasques droites (plates).<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
EP Chain No.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nt\/T<\/th>\nQ min (kN\/lbf)<\/th>\nq (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
EP-04BH<\/td>\n6.000<\/td>\n4.00<\/td>\n2.80<\/td>\n1.85<\/td>\n8.4<\/td>\n9.4<\/td>\n5.0<\/td>\n0.90<\/td>\n5.00\/1136<\/td>\n0.14<\/td>\n<\/tr>\n
EP-*06BH<\/td>\n9.525<\/td>\n6.35<\/td>\n5.72<\/td>\n3.28<\/td>\n14.4<\/td>\n15.4<\/td>\n8.2<\/td>\n1.60<\/td>\n11.25\/2557<\/td>\n0.51<\/td>\n<\/tr>\n
*35HF1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n14.6<\/td>\n15.6<\/td>\n9.0<\/td>\n1.80<\/td>\n9.00\/2023<\/td>\n0.47<\/td>\n<\/tr>\n
EP-08AHF1<\/td>\n12.700<\/td>\n7.95<\/td>\n10.00<\/td>\n3.96<\/td>\n21.0<\/td>\n22.2<\/td>\n12.0<\/td>\n2.03<\/td>\n13.80\/3136<\/td>\n0.88<\/td>\n<\/tr>\n
EP-08BH<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n18.8<\/td>\n19.9<\/td>\n11.8<\/td>\n2.03<\/td>\n20.60\/4682<\/td>\n0.79<\/td>\n<\/tr>\n
41HF1<\/td>\n12.700<\/td>\n7.77<\/td>\n6.25<\/td>\n3.58<\/td>\n16.7<\/td>\n18.0<\/td>\n9.9<\/td>\n2.03<\/td>\n9.00\/2023<\/td>\n0.59<\/td>\n<\/tr>\n
EP-*C40HF3<\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.0<\/td>\n2.03<\/td>\n20.00\/4496<\/td>\n0.94<\/td>\n<\/tr>\n
EP-*C08BHF8<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n19.9<\/td>\n21.0<\/td>\n11.8<\/td>\n2.42\/2.03<\/td>\n25.00\/5620<\/td>\n1.04<\/td>\n<\/tr>\n
EP-10BH<\/td>\n15.875<\/td>\n10.16<\/td>\n9.65<\/td>\n5.08<\/td>\n20.2<\/td>\n21.6<\/td>\n14.7<\/td>\n1.85<\/td>\n25.00\/5681<\/td>\n1.03<\/td>\n<\/tr>\n
EP-10BHF1<\/td>\n15.875<\/td>\n10.16<\/td>\n6.45<\/td>\n5.08<\/td>\n18.0<\/td>\n19.8<\/td>\n14.7<\/td>\n2.10<\/td>\n23.60\/5305<\/td>\n1.05<\/td>\n<\/tr>\n
EP-12BH<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.2<\/td>\n26.8<\/td>\n16.0<\/td>\n2.42<\/td>\n40.00\/9091<\/td>\n1.45<\/td>\n<\/tr>\n
EP-12BHF1<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.0<\/td>\n27.2<\/td>\n16.5<\/td>\n2.50<\/td>\n44.00\/10000<\/td>\n1.46<\/td>\n<\/tr>\n
EP-12BHF2<\/td>\n19.050<\/td>\n12.07<\/td>\n13.30<\/td>\n6.10<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.72<\/td>\n<\/tr>\n
EP-12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n13.50<\/td>\n5.72<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.71<\/td>\n<\/tr>\n
EP-12BV<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n24.5<\/td>\n26.5<\/td>\n16.0<\/td>\n2.42<\/td>\n36.00\/8182<\/td>\n1.43<\/td>\n<\/tr>\n
EP-60HV<\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.0<\/td>\n3.25<\/td>\n40.00\/9090<\/td>\n2.00<\/td>\n<\/tr>\n
EP-12AHF7<\/td>\n19.050<\/td>\n11.91<\/td>\n9.50<\/td>\n5.94<\/td>\n25.9<\/td>\n27.7<\/td>\n18.0<\/td>\n3.25<\/td>\n49.00\/11015<\/td>\n1.78<\/td>\n<\/tr>\n
EP-12AHF101<\/td>\n19.050<\/td>\n11.91<\/td>\n9.40<\/td>\n5.94<\/td>\n26.3<\/td>\n28.1<\/td>\n18.0<\/td>\n3.25<\/td>\n53.00\/11914<\/td>\n1.81<\/td>\n<\/tr>\n
EP-12BHF5<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n6.10<\/td>\n25.2<\/td>\n26.8<\/td>\n17.9<\/td>\n2.42<\/td>\n40.00\/8992<\/td>\n1.60<\/td>\n<\/tr>\n
EP-*C12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.72<\/td>\n29.3<\/td>\n31.2<\/td>\n20.0<\/td>\n4.00\/3.00<\/td>\n31.40\/7059<\/td>\n2.38<\/td>\n<\/tr>\n
EP-16BH<\/td>\n25.400<\/td>\n15.88<\/td>\n17.02<\/td>\n8.90<\/td>\n35.7<\/td>\n38.9<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n3.11<\/td>\n<\/tr>\n
EP-16BHF3<\/td>\n25.400<\/td>\n15.88<\/td>\n12.70<\/td>\n8.90<\/td>\n31.6<\/td>\n35.0<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n2.90<\/td>\n<\/tr>\n
EP-*C20AHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.05<\/td>\n10.32<\/td>\n43.6<\/td>\n46.9<\/td>\n30.0<\/td>\n6.00\/4.80<\/td>\n146.00\/32821<\/td>\n5.40<\/td>\n<\/tr>\n
EP-20BH<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n26.4<\/td>\n6.00\/4.80<\/td>\n95.00\/21356<\/td>\n4.52<\/td>\n<\/tr>\n
EP-20BHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n29.2<\/td>\n6.00\/4.80<\/td>\n100.00\/33720<\/td>\n5.09<\/td>\n<\/tr>\n
EP-24BH<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n58.6<\/td>\n63.4<\/td>\n36.2<\/td>\n7.50\/6.00<\/td>\n225.00\/51136<\/td>\n9.00<\/td>\n<\/tr>\n
EP-24BHF2<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n57.8<\/td>\n62.2<\/td>\n37.0<\/td>\n7.20\/6.00<\/td>\n225.40\/51226<\/td>\n9.06<\/td>\n<\/tr>\n
EP-24BHF5<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n64.6<\/td>\n69.1<\/td>\n36.2<\/td>\n9.00\/7.50<\/td>\n270.00\/61344<\/td>\n10.60<\/td>\n<\/tr>\n
EP-28BH<\/td>\n44.450<\/td>\n27.94<\/td>\n30.99<\/td>\n15.90<\/td>\n69.6<\/td>\n75.0<\/td>\n36.7<\/td>\n8.50\/7.20<\/td>\n200.00\/44960<\/td>\n9.99<\/td>\n<\/tr>\n
EP-32AHF1<\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n15.90<\/td>\n75.4<\/td>\n80.3<\/td>\n47.8<\/td>\n9.00<\/td>\n222.40\/49996<\/td>\n13.36<\/td>\n<\/tr>\n
EP-32BH<\/td>\n50.800<\/td>\n29.21<\/td>\n30.99<\/td>\n17.81<\/td>\n72.0<\/td>\n77.2<\/td>\n42.0<\/td>\n8.00<\/td>\n250.00\/56200<\/td>\n11.26<\/td>\n<\/tr>\n
EP-32BHF1<\/td>\n50.800<\/td>\n29.21<\/td>\n31.55<\/td>\n17.81<\/td>\n69.9<\/td>\n74.7<\/td>\n48.2<\/td>\n8.00\/7.15<\/td>\n350.00\/78680<\/td>\n13.20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

\"\"<\/p>\n

\n

Quand choisir la s\u00e9rie Heavy Duty plut\u00f4t que la s\u00e9rie A standard<\/h2>\n
\n
\n

Arr\u00eats et red\u00e9marrages fr\u00e9quents sous charge<\/h3>\n

Chaque cycle d'arr\u00eat-d\u00e9marrage induit une impulsion de traction dans la cha\u00eene, le brin mou \u00e9tant brusquement tendu. Les plaques plus \u00e9paisses de la s\u00e9rie H pr\u00e9sentent une section transversale plus importante et, par cons\u00e9quent, une limite de fatigue sup\u00e9rieure sous des cycles de traction r\u00e9p\u00e9t\u00e9s. Pour les applications subissant plus de 20 d\u00e9marrages et arr\u00eats par heure en charge, il est recommand\u00e9 d'utiliser au minimum la s\u00e9rie H.<\/p>\n<\/div>\n

\n

Impact des machines coupl\u00e9es<\/h3>\n

Les presses alternatives, les presses \u00e0 poin\u00e7onner, les concasseurs \u00e0 m\u00e2choires et les broyeurs \u00e0 canne g\u00e9n\u00e8rent tous des chocs importants au niveau de leur cha\u00eene d'entra\u00eenement. Le facteur de service pour ces applications atteint g\u00e9n\u00e9ralement 1,5 \u00e0 2,0 sur la s\u00e9rie A standard, ce qui fait de la s\u00e9rie H le choix id\u00e9al sans n\u00e9cessiter un pas plus grand ni un plus grand nombre de brins.<\/p>\n<\/div>\n

\n

Entra\u00eenements agricoles lourds<\/h3>\n

Les transmissions principales des moissonneuses-batteuses, les secoueurs de paille et les entra\u00eenements des tambours de battage combinent des charges intermittentes \u00e9lev\u00e9es et des chocs dus \u00e0 l'ingestion de la r\u00e9colte. La s\u00e9rie H est largement choisie comme \u00e9quipement d'origine pour ces transmissions, car l'\u00e9paisseur accrue des plaques prolonge leur dur\u00e9e de vie en conditions r\u00e9elles d'utilisation, o\u00f9 le remplacement de la cha\u00eene est co\u00fbteux et contraignant.<\/p>\n<\/div>\n

\n

Environnement \u00e0 fortes vibrations<\/h3>\n

Les cribles vibrants, les alimentateurs vibrants, les convoyeurs vibrants et les concasseurs transmettent tous des vibrations \u00e0 haute fr\u00e9quence \u00e0 la cha\u00eene d'entra\u00eenement par l'interm\u00e9diaire du pignon et de l'arbre. Sous contrainte altern\u00e9e, les fissures de fatigue dans les plaques de liaison s'amorcent plus facilement au niveau du trou de goupille. La plaque plus \u00e9paisse de la s\u00e9rie H r\u00e9partit cette contrainte sur une plus grande surface, ce qui emp\u00eache l'amor\u00e7age des fissures.<\/p>\n<\/div>\n

\n

M\u00eames pignons, capacit\u00e9 sup\u00e9rieure<\/h3>\n

La s\u00e9rie H utilise le m\u00eame pas que la s\u00e9rie A \u00e9quivalente\u00a0; elle est donc compatible avec les m\u00eames pignons sans aucune modification de la transmission. Lorsqu'une cha\u00eene standard de la s\u00e9rie A pr\u00e9sente une dur\u00e9e de vie insuffisante, le passage \u00e0 la s\u00e9rie H ne n\u00e9cessite qu'un remplacement de la cha\u00eene, sans qu'il soit n\u00e9cessaire de repenser les centres de pignons, les arbres ou les protections.<\/p>\n<\/div>\n

\n

Exigences non standard des \u00e9quipementiers<\/h3>\n

Les s\u00e9ries non standard BH et BHF sont con\u00e7ues pour le remplacement de pi\u00e8ces d'origine, lorsque la machine a \u00e9t\u00e9 initialement con\u00e7ue selon des sp\u00e9cifications de cha\u00eene propri\u00e9taires non couvertes par la s\u00e9rie standard H. Diff\u00e9rentes configurations sont disponibles\u00a0: plaques lat\u00e9rales droites (BHF), plaques \u00e0 brides, largeurs int\u00e9rieures plus importantes, ou encore configurations combin\u00e9es de rouleaux et de bagues. Veuillez fournir un \u00e9chantillon de cha\u00eene ou un sch\u00e9ma pour obtenir un devis.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Applications<\/h2>\n
\n
\n

Machines agricoles<\/h3>\n

Les cha\u00eenes simplex EP 40H \u00e0 100H constituent la norme pour les transmissions principales des moissonneuses-batteuses, les entra\u00eenements des secoueurs de paille et les entra\u00eenements des vis sans fin \u00e0 grains. La 40H-1 est la cha\u00eene renforc\u00e9e la plus utilis\u00e9e au monde dans le secteur des machines agricoles. Son \u00e9paisseur sup\u00e9rieure absorbe les chocs li\u00e9s \u00e0 l'ingestion de r\u00e9coltes et \u00e0 l'introduction de pierres dans le m\u00e9canisme d'alimentation, ce qui lui conf\u00e8re une dur\u00e9e de vie environ 40% sup\u00e9rieure \u00e0 celle d'une cha\u00eene standard 40 \u00e9quivalente dans les m\u00eames conditions.<\/p>\n<\/div>\n

\n

Entra\u00eenements de presse et de poin\u00e7onnage<\/h3>\n

Les presses m\u00e9caniques, les poin\u00e7onneuses et les machines \u00e0 emboutir transmettent une forte onde de choc \u00e0 travers la cha\u00eene d'entra\u00eenement lors du contact et de la perforation du poin\u00e7on. Les cha\u00eenes EP 80H-1, 100H-1 et 120H-1, simples et doubles, sont couramment utilis\u00e9es pour les entra\u00eenements principaux et les volants d'inertie des presses. L'\u00e9paisseur accrue de la t\u00f4le emp\u00eache la fissuration par fatigue qui se produirait autrement au niveau du trou de goupille sous l'effet de cycles de contraintes r\u00e9p\u00e9t\u00e9s de forte amplitude.<\/p>\n<\/div>\n

\n

Exploitation mini\u00e8re et carri\u00e8re<\/h3>\n

Les cha\u00eenes EP 120H \u00e0 240H sont destin\u00e9es aux entra\u00eenements de concasseurs primaires, de cribles vibrants et d'alimentateurs \u00e0 tablier dans les mines et les carri\u00e8res. Les mod\u00e8les Duplex 120H-2 et 160H-2 constituent la gamme standard pour les entra\u00eenements principaux des concasseurs \u00e0 m\u00e2choires. La s\u00e9rie H est \u00e9galement pr\u00e9conis\u00e9e pour les entra\u00eenements des installations de pr\u00e9paration du charbon, o\u00f9 l'eau et la poussi\u00e8re de charbon contaminent la lubrification et o\u00f9 l'entra\u00eenement fonctionne sous charge variable en raison des fluctuations du d\u00e9bit d'alimentation en charbon.<\/p>\n<\/div>\n

\n

Industrie sucri\u00e8re<\/h3>\n

Sugar mill main drives and cane elevator drives use EP heavy duty chains in the 100H to 200H range. The juice environment is highly corrosive to steel chain, and the cane ingestion load is unpredictable – a stone or dense root clump entering the mill can momentarily spike the load to several times the rated running load. The H series provides the combination of corrosion resistance (through correct lubrication specification) and fatigue strength required for these demanding tropical mill conditions.<\/p>\n<\/div>\n<\/div>\n

\"Tests<\/p>\n

Pignons compatibles et autres types de cha\u00eenes<\/h2>\n
\n
\n

\"Pignons<\/p>\n

Des pignons adapt\u00e9s \u00e0 chaque taille de cha\u00eene EP sont disponibles sur le site de notre partenaire. cha\u00eene-de-pignon.net<\/a>. Toutes les formes de dents ANSI B29.1 et ISO 606, simplex \u00e0 8 brins, acier au carbone C45 et acier alli\u00e9, conceptions de moyeux \u00e0 al\u00e9sage pilote et \u00e0 al\u00e9sage fini.<\/p>\n

Voir les pignons compatibles \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

\n

Autres cha\u00eenes<\/h3>\n
\n
\n

\"Cha\u00eenes<\/p>\n

Cha\u00eenes en acier inoxydable<\/a><\/h3>\n

Cha\u00eenes \u00e0 rouleaux SUS304 et SUS316L pour les environnements alimentaires, pharmaceutiques et corrosifs.<\/p>\n

Champ de vision<\/a><\/p>\n<\/div>\n

\n

\"Cha\u00eenes<\/p>\n

Cha\u00eenes agricoles<\/a><\/h3>\n

S\u00e9ries CA, CC et S pour moissonneuses-batteuses, presses \u00e0 balles et machines de manutention des r\u00e9coltes. Norme ISO 487.<\/p>\n

Champ de vision<\/a><\/p>\n<\/div>\n

\n

\"Cha\u00eenes<\/p>\n

Cha\u00eenes d'ing\u00e9nierie<\/a><\/h3>\n

Cha\u00eenes en acier soud\u00e9 WH, en fonte et \u00e0 maillons ronds pour le transport dans les secteurs du ciment, des mines et des installations lourdes.<\/p>\n

Champ de vision<\/a><\/p>\n<\/div>\n<\/div>\n

\"\"<\/div>\n<\/div>\n

Foire aux questions<\/h2>\n
\n
\nQuelle est la diff\u00e9rence entre la s\u00e9rie H et la s\u00e9rie A standard \u00e0 pas \u00e9gal ?<\/summary>\n
The H series uses thicker link plates than the standard A series at the same pitch. For example, a standard 60 (08A) chain has a plate thickness of 2.42 mm; the 60H chain has a plate thickness of 3.25 mm – approximately 34% thicker. The larger plate cross-section gives a higher minimum tensile strength (31.8 kN versus about 31.8 kN for the standard – the gain is primarily in fatigue life and plate thickness rather than tensile strength at the smaller sizes, becoming more pronounced at 80 and above where the H series clearly outperforms the standard chain). The pin diameter and roller diameter remain the same, so H series chains run on standard pitch sprockets without any modification.<\/div>\n<\/details>\n
\nPuis-je utiliser des cha\u00eenes de la s\u00e9rie H sur mes pignons de la s\u00e9rie A existants\u00a0?<\/summary>\n
Oui, les cha\u00eenes de la s\u00e9rie H sont compatibles avec les pignons standard ANSI de la s\u00e9rie A sans aucune modification. Le pas, le diam\u00e8tre des rouleaux et la largeur int\u00e9rieure des cha\u00eenes de la s\u00e9rie H correspondent \u00e0 ceux des cha\u00eenes de la s\u00e9rie A pour un m\u00eame num\u00e9ro de cha\u00eene. Seule l'\u00e9paisseur des plaques diff\u00e8re, ce qui n'a aucune incidence sur l'engr\u00e8nement, car la denture du pignon s'engage avec les rouleaux et les plaques int\u00e9rieures plut\u00f4t qu'avec les plaques ext\u00e9rieures. Ces derni\u00e8res, plus \u00e9paisses, d\u00e9passent l\u00e9g\u00e8rement de la dent du pignon, ce qui reste dans les limites du jeu normal.<\/div>\n<\/details>\n
\nQue signifient les codes de suffixe des cha\u00eenes de la s\u00e9rie BH (BH, BHF1, BHF2, etc.)\u00a0?<\/summary>\n
The BH designation identifies these as heavy duty variants of the ISO B series roller chain geometry, produced by Ever-Power for specific OEM applications. The F in BHF stands for flat side plate (also called straight side plate) – a plate shape where the inner and outer plates are the same rectangular profile rather than the usual waisted figure-eight shape used in standard roller chains. The number after F identifies the specific plate profile variant (F1, F2, F3, F5 etc. are different proprietary plate dimensions used by different OEM machine manufacturers). The V suffix (as in 12BV or 60HV) identifies a chain with a specific plate profile used in high-speed applications. When ordering BH or BHF chains as replacements, always provide the complete EP chain number from the specification table and verify against a sample of the original chain.<\/div>\n<\/details>\n
\nLa lubrification est-elle diff\u00e9rente pour les cha\u00eenes de la s\u00e9rie H par rapport aux cha\u00eenes standard\u00a0?<\/summary>\n
The lubrication requirements for H series chains are the same as for standard A series chains at the same pitch and speed – mineral oil applied at the pin-bush joint by drip oiler, bath, or spray system depending on chain speed. The lubrication method does not need to change when upgrading from A series to H series. What does sometimes change is the lubrication interval in severe applications: because the H series is typically specified for shock-loaded drives with more demanding duty cycles, more frequent oil replenishment may be required to maintain the oil film under high joint-load conditions. For drives with service factors above 1.5, consider a continuous drip oiler even at speeds below 1 m\/s.<\/div>\n<\/details>\n
\nQuels sont les maillons de liaison utilis\u00e9s pour les cha\u00eenes de la s\u00e9rie H\u00a0?<\/summary>\n
Les cha\u00eenes de la s\u00e9rie H utilisent des maillons de liaison \u00e0 goupille fendue plut\u00f4t qu'\u00e0 clip, ce qui refl\u00e8te les contraintes plus \u00e9lev\u00e9es exerc\u00e9es sur les articulations dans les applications intensives. La goupille fendue offre une meilleure r\u00e9sistance aux chocs que le clip, qui peut se desserrer en cas de fortes vibrations de la cha\u00eene. Pour les cha\u00eenes 40H \u00e0 60H, un maillon de liaison \u00e0 deux goupilles fendues est fourni de s\u00e9rie. Pour les cha\u00eenes 80H et sup\u00e9rieures, un maillon de liaison boulonn\u00e9 avec vis \u00e0 six pans creux et contre-\u00e9crous est disponible en alternative \u00e0 la goupille fendue pour les applications n\u00e9cessitant des d\u00e9montages et remontages fr\u00e9quents. Il est imp\u00e9ratif de remplacer le maillon de liaison \u00e0 chaque changement de cha\u00eene, quel que soit son \u00e9tat apparent.<\/div>\n<\/details>\n
\nPouvez-vous fournir des cha\u00eenes BH et BHF non standard en remplacement des machines existantes\u00a0?<\/summary>\n
Oui. Les gammes BH et BHF sont sp\u00e9cifiquement con\u00e7ues pour remplacer les cha\u00eenes d'origine des machines utilisant des sp\u00e9cifications non standard. Si votre r\u00e9f\u00e9rence de cha\u00eene figure dans le tableau BH ou BHF ci-dessus, veuillez indiquer la r\u00e9f\u00e9rence EP, la quantit\u00e9 en m\u00e8tres ou le nombre de maillons, et pr\u00e9ciser si un maillon de raccordement est n\u00e9cessaire. Si votre cha\u00eene ne figure pas dans le tableau, veuillez envoyer un \u00e9chantillon d'au moins 5 maillons connect\u00e9s pour une analyse dimensionnelle. EP identifiera la cha\u00eene la plus proche ou fabriquera une cha\u00eene sur mesure selon les dimensions de votre \u00e9chantillon, avec une quantit\u00e9 minimale de commande de 10 m\u00e8tres. Pour les remplacements urgents, veuillez fournir les informations suivantes\u00a0: le pas (mesur\u00e9 entre 10 axes cons\u00e9cutifs, divis\u00e9 par 10), le diam\u00e8tre du rouleau ou le diam\u00e8tre ext\u00e9rieur de la bague, la largeur int\u00e9rieure entre les plaques, le diam\u00e8tre de l'axe et l'\u00e9paisseur de la plaque. Des photos de la face et du chant sont \u00e9galement utiles pour identifier le profil de la plaque.<\/div>\n<\/details>\n<\/div>\n

Ce que disent nos clients<\/h2>\n
\n
\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We upgraded our combine harvester main drive from standard 80 chain to EP 80H-1. The previous standard chains were needing replacement every harvest season. The 80H chains have now run for three full harvests with elongation at 1.6% – well within the 3% replacement threshold. The cost per season is significantly lower even though the EP 80H chain has a higher purchase price.”<\/p>\n

BK, ing\u00e9nieur de flotte<\/strong>
\nUkraine – Large Grain Farm<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our jaw crusher main drive uses 120H-2 duplex chains. We had a history of fatigue plate fractures with previous supplier chains approximately every 8 months. EP 120H-2 chains have been running for 19 months without any plate fracture or connecting link failure. The improvement is directly attributable to the consistent plate hardness across the batch – no soft spots.”<\/p>\n

AO, surintendant de la maintenance<\/strong>
\nSouth Africa – Aggregate Quarry<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We needed a 12BHF2 non-standard chain to replace the original OEM specification on our packaging machine elevator drive. EP confirmed the chain from our EP chain number, delivered 5 complete circuit lengths cut and fitted with connecting links within 9 working days. The chains matched the original dimensions exactly and fitted without adjustment.”<\/p>\n

PW, responsable de l'ing\u00e9nierie<\/strong>
\nGermany – Food Packaging Plant<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our sugar mill drive specifies 160H-1 simplex chains for the cane elevator. The EP chains have been running through two grinding seasons in a highly corrosive juice environment with correct lubrication. Service life has exceeded our planned replacement interval and our maintenance team now standardises on EP H series across all mill drives.”<\/p>\n

RF, ing\u00e9nieur en chef<\/strong>
\nThailand – Sugar Mill<\/p>\n<\/div>\n<\/div>\n

\n
\n

Demande de devis pour cha\u00eenes \u00e0 rouleaux renforc\u00e9es EP<\/h3>\n

Veuillez indiquer la d\u00e9signation de la cha\u00eene (num\u00e9ro ANSI s\u00e9rie H avec suffixe de toron, ou num\u00e9ro de cha\u00eene EP-BH\/BHF), la quantit\u00e9 en m\u00e8tres ou le nombre de maillons, et pr\u00e9ciser si des sp\u00e9cifications de fixation ou de connexion sont n\u00e9cessaires. Pour les cha\u00eenes BH\/BHF non standard, le num\u00e9ro de cha\u00eene EP figurant dans le tableau ci-dessus ou un \u00e9chantillon dimensionnel suffit pour obtenir un devis. Notre \u00e9quipe vous r\u00e9pondra sous 24 heures ouvrables.<\/p>\n

Obtenez un devis d\u00e8s maintenant<\/a>
\nTous les produits de cha\u00eene de transmission<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

Cha\u00eenes renforc\u00e9es s\u00e9rie H, cha\u00eenes renforc\u00e9es non standard, simplex, duplex et triplex. Plaques plus \u00e9paisses et axes plus larges que la s\u00e9rie A standard \u00e0 pas \u00e9gal. Pas de 9,525 mm \u00e0 76,2 mm. S\u00e9rie renforc\u00e9e Ever-Power *35H \u00e0 240H, plus gamme non standard BH\/BHF.<\/p>","protected":false},"featured_media":122,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-206","product","type-product","status-publish","has-post-thumbnail","product_cat-driving-chains","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/5speedtransmission.com\/fr\/wp-json\/wp\/v2\/product\/206","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/5speedtransmission.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/5speedtransmission.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/fr\/wp-json\/wp\/v2\/comments?post=206"}],"wp:attachment":[{"href":"https:\/\/5speedtransmission.com\/fr\/wp-json\/wp\/v2\/media?parent=206"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/5speedtransmission.com\/fr\/wp-json\/wp\/v2\/product_brand?post=206"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/5speedtransmission.com\/fr\/wp-json\/wp\/v2\/product_cat?post=206"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/5speedtransmission.com\/fr\/wp-json\/wp\/v2\/product_tag?post=206"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}