{"id":216,"date":"2026-07-24T07:25:26","date_gmt":"2026-07-24T07:25:26","guid":{"rendered":"https:\/\/5speedtransmission.com\/?post_type=product&p=216"},"modified":"2026-07-24T07:25:26","modified_gmt":"2026-07-24T07:25:26","slug":"heavy-duty-cranked-link-transmission-chains","status":"publish","type":"product","link":"https:\/\/5speedtransmission.com\/et\/toode\/heavy-duty-cranked-link-transmission-chains\/","title":{"rendered":"Tugevdatud v\u00e4ntl\u00fcliga \u00fclekandeketid"},"content":{"rendered":"
\n
\n
\n

30+ mudelit<\/p>\n

MXS \/ SS \/ 2512 \/ 2510<\/p>\n<\/div>\n

\n

42,01 kuni 78,10 mm<\/p>\n

K\u00f5rgusvahemik<\/p>\n<\/div>\n

\n

Kuni 562 kN<\/p>\n

Keskmine t\u00f5mbetugevus<\/p>\n<\/div>\n

\n

ISO 9001<\/p>\n

Sertifitseeritud kvaliteet<\/p>\n<\/div>\n<\/div>\n

Heavy Duty Cranked-Link Chain – Product Overview<\/h2>\n
\n
\n

Igavene j\u00f5ud tugevad v\u00e4ntl\u00fcliga \u00fclekandeketid<\/a> are a specialised family of roller chains designed for high-load, low-speed power transmission applications in heavy industrial equipment. The cranked-link design – also known as the offset-link or bent-link construction – uses link plates that are bent or cranked outward at the pin hole position rather than the conventional flat plate. This geometry allows the use of a larger-diameter pin and bush at the same pitch compared to a standard flat plate chain, resulting in a higher joint bearing area and significantly greater resistance to pin bending failure under the very high tensions encountered in these applications.<\/p>\n

V\u00e4ntl\u00fclidega konstruktsioonil on ka oluline praktiline eelis: kuna sisemine ja v\u00e4limine plaat on samast v\u00e4ntprofiilist, mitte kahest erinevast lameprofiilist, saab ketti kokku panna ja lahti v\u00f5tta standardsete \u00fchendusl\u00fclide abil, mis on identsed jooksvate l\u00fclidega. See lihtsustab hooldust ja v\u00e4hendab \u00fchendusl\u00fcli vale paigaldamise ohtu. Standardne rullketi \u00fchendusl\u00fcli (vedruklambri v\u00f5i splint-tihvti t\u00fc\u00fcpi) kasutab plaati, mis erineb jooksvast sisemisest plaadist, mis v\u00f5ib vale \u00fchendusl\u00fcli paigaldamisel probleeme tekitada. V\u00e4ntl\u00fclidega ketid k\u00f5rvaldavad selle probleemi t\u00e4ielikult.<\/p>\n

EP v\u00e4nt-hoovaga mudelivalikusse kuulub neli peamist seeriat. MXS-seeria<\/strong> (EP-MXS432, EP-MXS882, EP-MXS882F1, EP-MXS3011F1) katab kerge ja keskmise koormusega v\u00e4nt\u00fchendusega rakendusi sammuga 42 kuni 78 mm. SS-seeria<\/strong> (EP-SS2065, EP-SS588, EP-SS588F1, EP-SS588F2, EP-SS588F7, EP-SS568H, EP-SS568HF2, EP-SS568HF3, EP-SS568HF4) pakub standardset keskmise raskusega v\u00e4nt\u00fchendusega sidurit sammuga 50,8 kuni 77,9 mm, mida kasutatakse laialdaselt kahvelt\u00f5stukite pea\u00fclekannetes, t\u00f6\u00f6stuss\u00f5idukite ajamites ja p\u00f5llumajandusmasinate primaar\u00fclekannetes. 2512 seeria<\/strong> (EP-2512, EP-2512F2, EP-2512F3, EP-2512F4) katab k\u00f5ige raskemate kahvelt\u00f5stukite ja raskeveokite k\u00e4igukastide rakendused 77,9 mm sammuga. 2510 seeria<\/strong> (EP-2510, EP-2510F1, EP-2510F2, EP-2510H) 78,1 mm sammuga tagab v\u00e4nt\u00fchendusega konfiguratsiooni puhul selles valikus maksimaalse kandev\u00f5ime.<\/p>\n

Chains marked with an asterisk (*) in the EP model number are bush chains – the roller is replaced by a sleeve, and the d1 dimension in the specification table refers to the external diameter of the bush rather than an outer roller. The F suffix designations (F1, F2, F3, F4, F7) identify different plate geometry variants used by specific OEM manufacturers. The H suffix indicates a heavy plate variant with thicker link plates for higher fatigue life. The SH suffix indicates a super-heavy plate variant. All EP cranked-link chains are manufactured from alloy steel with heat-treated plates, case-hardened pins and bushes, and precision-ground pin diameters. Pre-loading is applied to all assembled chains before final pitch measurement and despatch.<\/p>\n<\/div>\n

\"Tugevdatud<\/p>\n<\/div>\n<\/div>\n
\n

M\u00f5\u00f5tmete v\u00f5ti:<\/strong> P = Samm | d1 = Rulli l\u00e4bim\u00f5\u00f5t max (pukskett: v\u00e4lispukskett) | b1 = Plaatide vaheline siselaius min | d2 = Tihvti l\u00e4bim\u00f5\u00f5t max | L = Tihvti pikkus max | h2 = Plaadi s\u00fcgavus | T = Plaadi paksus | Q = Min t\u00f5mbetugevus kN\/lbf | Q0 = Keskmine t\u00f5mbetugevus kN | q = Kaal kg\/m | * = Pukskett | F = Variantne plaadi geomeetria | H = Raske plaat | SH = \u00dcliraske plaat<\/p>\n<\/div>\n

V\u00e4nt-l\u00fcliga keti spetsifikatsioonid<\/h2>\n

K\u00f5ik m\u00f5\u00f5tmed on millimeetrites. T\u00e4rniga (*) t\u00e4histatud ketid on puksketid. F-, H- ja SH-sufiksid t\u00e4histavad plaadi geomeetriat v\u00f5i raskuse variante, nagu eespool kirjeldatud.<\/p>\n

\"Tugevdatud<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
EP mudel<\/th>\nP (mm)<\/th>\nd1 maks (mm)<\/th>\nb1 min (mm)<\/th>\nd2 maks (mm)<\/th>\nMaksimaalne pikkus (mm)<\/th>\nk\u00f5rgus (mm)<\/th>\nT (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
MXS-seeria<\/td>\n<\/tr>\n
EP-MXS432<\/td>\n42.01<\/td>\n22.23<\/td>\n25.40<\/td>\n11.10<\/td>\n57.9<\/td>\n28.50<\/td>\n4.8<\/td>\n80.80\/18363<\/td>\n88.0<\/td>\n5.65<\/td>\n<\/tr>\n
EP-MXS882<\/td>\n66.27<\/td>\n22.23<\/td>\n28.58<\/td>\n11.10<\/td>\n68.5<\/td>\n28.50<\/td>\n6.4<\/td>\n115.60\/26272<\/td>\n124.8<\/td>\n5.30<\/td>\n<\/tr>\n
EP-MXS882F1<\/td>\n66.27<\/td>\n22.10<\/td>\n28.58<\/td>\n11.10<\/td>\n68.5<\/td>\n28.50<\/td>\n6.4<\/td>\n110.00\/24728<\/td>\n121.0<\/td>\n5.39<\/td>\n<\/tr>\n
EP-*MXS3011F1<\/td>\n77.90<\/td>\n31.75<\/td>\n39.60<\/td>\n19.05<\/td>\n100.0<\/td>\n57.00<\/td>\n9.7<\/td>\n407.50\/18363<\/td>\n468.0<\/td>\n17.68<\/td>\n<\/tr>\n
EP-*MXS882F2<\/td>\n66.27<\/td>\n22.23<\/td>\n28.58<\/td>\n11.10<\/td>\n66.6<\/td>\n28.50<\/td>\n6.4<\/td>\n115.60\/25987<\/td>\n124.8<\/td>\n5.39<\/td>\n<\/tr>\n
Eriseeria (1409F1, R3112, SS2065, 2010)<\/td>\n<\/tr>\n
EP-1409F1<\/td>\n44.45<\/td>\n25.40<\/td>\n25.40<\/td>\n13.97<\/td>\n65.9<\/td>\n43.20<\/td>\n6.3<\/td>\n217.00\/48782<\/td>\n238.7<\/td>\n9.65<\/td>\n<\/tr>\n
EP-R3112<\/td>\n50.80<\/td>\n28.70<\/td>\n31.00<\/td>\n14.20<\/td>\n73.9<\/td>\n41.40<\/td>\n6.4<\/td>\n168.90\/38385<\/td>\n185.0<\/td>\n10.70<\/td>\n<\/tr>\n
EP-R3112F1<\/td>\n50.80<\/td>\n28.70<\/td>\n31.00<\/td>\n15.06<\/td>\n79.5<\/td>\n41.40<\/td>\n7.9<\/td>\n195.60\/18363<\/td>\n225.0<\/td>\n12.23<\/td>\n<\/tr>\n
EP-SS2065<\/td>\n50.80<\/td>\n28.58<\/td>\n32.50<\/td>\n15.05<\/td>\n79.5<\/td>\n38.00<\/td>\n7.9<\/td>\n220.00\/49998<\/td>\n242.0<\/td>\n12.14<\/td>\n<\/tr>\n
EP-2010<\/td>\n63.50<\/td>\n31.75<\/td>\n38.10<\/td>\n15.90<\/td>\n89.0<\/td>\n47.80<\/td>\n7.9<\/td>\n250.00\/56818<\/td>\n275.0<\/td>\n13.53<\/td>\n<\/tr>\n
EP-2010H<\/td>\n63.50<\/td>\n31.75<\/td>\n31.75<\/td>\n15.88<\/td>\n97.0<\/td>\n41.50<\/td>\n9.5<\/td>\n250.00\/56818<\/td>\n275.0<\/td>\n11.91<\/td>\n<\/tr>\n
EP-2010SH<\/td>\n63.50<\/td>\n31.75<\/td>\n38.10<\/td>\n15.88<\/td>\n97.0<\/td>\n41.50<\/td>\n9.5<\/td>\n300.00\/68181<\/td>\n330.0<\/td>\n12.00<\/td>\n<\/tr>\n
SS588 seeria<\/td>\n<\/tr>\n
EP-*SS588F4<\/td>\n66.27<\/td>\n22.23<\/td>\n30.40<\/td>\n11.11<\/td>\n60.0<\/td>\n32.00<\/td>\n4.8<\/td>\n90.00\/20454<\/td>\n103.0<\/td>\n5.05<\/td>\n<\/tr>\n
EP-SS588<\/td>\n66.27<\/td>\n22.23<\/td>\n28.60<\/td>\n11.11<\/td>\n63.7<\/td>\n28.60<\/td>\n6.4<\/td>\n130.00\/29545<\/td>\n144.0<\/td>\n5.46<\/td>\n<\/tr>\n
EP-SS588F1<\/td>\n66.27<\/td>\n22.23<\/td>\n27.00<\/td>\n11.11<\/td>\n62.0<\/td>\n28.60<\/td>\n6.4<\/td>\n88.90\/20205<\/td>\n97.8<\/td>\n5.39<\/td>\n<\/tr>\n
EP-SS588F2<\/td>\n66.27<\/td>\n22.23<\/td>\n27.00<\/td>\n9.53<\/td>\n59.0<\/td>\n25.40<\/td>\n5.6<\/td>\n84.46\/19195<\/td>\n91.2<\/td>\n4.26<\/td>\n<\/tr>\n
EP-SS588F7<\/td>\n66.27<\/td>\n22.35<\/td>\n26.90<\/td>\n11.20<\/td>\n60.0<\/td>\n28.70<\/td>\n4.8<\/td>\n80.00\/17984<\/td>\n88.0<\/td>\n4.52<\/td>\n<\/tr>\n
*MX603 seeria<\/td>\n<\/tr>\n
EP-*MX603<\/td>\n76.20<\/td>\n22.50<\/td>\n38.00<\/td>\n14.00<\/td>\n88.0<\/td>\n40.00<\/td>\n8.0<\/td>\n147.00\/33408<\/td>\n161.0<\/td>\n9.20<\/td>\n<\/tr>\n
2512 seeria (laius 77,90 mm)<\/td>\n<\/tr>\n
EP-2512(MXS3011)<\/td>\n77.90<\/td>\n41.28<\/td>\n39.60<\/td>\n19.05<\/td>\n100.0<\/td>\n57.00<\/td>\n9.7<\/td>\n340.00\/77272<\/td>\n489.3<\/td>\n18.40<\/td>\n<\/tr>\n
EP-2512F2<\/td>\n77.90<\/td>\n41.28<\/td>\n38.50<\/td>\n19.05<\/td>\n103.4<\/td>\n60.00<\/td>\n10.0<\/td>\n400.00\/90909<\/td>\n420.0<\/td>\n20.28<\/td>\n<\/tr>\n
EP-2512F3<\/td>\n77.90<\/td>\n41.28<\/td>\n40.00<\/td>\n18.60<\/td>\n104.2<\/td>\n46.70<\/td>\n11.0<\/td>\n340.00\/77271<\/td>\n391.0<\/td>\n18.15<\/td>\n<\/tr>\n
EP-2512F4<\/td>\n77.90<\/td>\n41.28<\/td>\n39.60<\/td>\n19.05<\/td>\n110.0<\/td>\n60.00<\/td>\n12.0<\/td>\n407.50\/92612<\/td>\n468.0<\/td>\n23.60<\/td>\n<\/tr>\n
SS568H seeria (laius 77,90 mm)<\/td>\n<\/tr>\n
EP-SS568H<\/td>\n77.90<\/td>\n41.30<\/td>\n39.70<\/td>\n19.05<\/td>\n97.6<\/td>\n57.00<\/td>\n9.5<\/td>\n460.00\/103408<\/td>\n515.0<\/td>\n19.80<\/td>\n<\/tr>\n
EP-SS568HF2<\/td>\n77.90<\/td>\n31.75<\/td>\n39.70<\/td>\n19.05<\/td>\n98.5<\/td>\n57.00<\/td>\n9.5<\/td>\n447.00\/101588<\/td>\n491.0<\/td>\n16.90<\/td>\n<\/tr>\n
EP-SS568HF3<\/td>\n77.90<\/td>\n41.30<\/td>\n39.70<\/td>\n19.05<\/td>\n104.1<\/td>\n57.00<\/td>\n11.0<\/td>\n489.30\/111203<\/td>\n562.0<\/td>\n20.85<\/td>\n<\/tr>\n
EP-SS568HF4<\/td>\n77.90<\/td>\n41.30<\/td>\n39.70<\/td>\n19.05<\/td>\n100.0<\/td>\n57.00<\/td>\n10.0<\/td>\n490.00\/110152<\/td>\n539.0<\/td>\n19.80<\/td>\n<\/tr>\n
2510 seeria (laius 78,10 mm)<\/td>\n<\/tr>\n
EP-2510<\/td>\n78.10<\/td>\n31.75<\/td>\n36.90<\/td>\n16.00<\/td>\n94.8<\/td>\n40.00<\/td>\n8.0<\/td>\n271.00\/61590<\/td>\n292.6<\/td>\n10.72<\/td>\n<\/tr>\n
EP-2510F1<\/td>\n78.10<\/td>\n31.75<\/td>\n36.60<\/td>\n16.00<\/td>\n88.9<\/td>\n38.10<\/td>\n8.0<\/td>\n124.50\/28295<\/td>\n137.0<\/td>\n9.93<\/td>\n<\/tr>\n
EP-2510F2<\/td>\n78.10<\/td>\n31.75<\/td>\n36.60<\/td>\n15.75<\/td>\n88.0<\/td>\n38.10<\/td>\n8.0<\/td>\n225.00\/51135<\/td>\n248.0<\/td>\n11.70<\/td>\n<\/tr>\n
EP-2510H<\/td>\n78.10<\/td>\n31.75<\/td>\n36.90<\/td>\n16.50<\/td>\n95.3<\/td>\n45.00<\/td>\n9.5<\/td>\n280.40\/63727<\/td>\n302.8<\/td>\n12.70<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

\"\"<\/p>\n

\n

Cranked-Link Chain – Key Technical Features<\/h2>\n
\n
\n

V\u00e4nnitud plaadi geomeetria<\/h3>\n

L\u00fcliplaat on tihvtiaugu juures v\u00e4ljapoole painutatud (v\u00e4\u00e4natud), mis v\u00f5imaldab k\u00f5igil konstruktsiooni plaatidel olla sama v\u00e4\u00e4natud profiiliga. See v\u00f5imaldab suurema l\u00e4bim\u00f5\u00f5duga tihvti ja puksi sama sammuga v\u00f5rreldes lameda plaadiga ketiga, suurendades liigendi laagripinda ja v\u00e4simuskindlust ilma keti laiust v\u00f5i sammu suurendamata. See geomeetria on eriti efektiivne kahvelt\u00f5stukite ja s\u00f5idukite ajamites, kus paigaldus\u00fcmbrise piirangud takistavad \u00fcleminekut suurema sammuga standardketi kasutamisele.<\/p>\n<\/div>\n

\n

Lihtsustatud p\u00f5lluhooldus<\/h3>\n

All links in a cranked-link chain – running links and connecting links – use the same plate profile. This means there is no risk of fitting a standard inner plate connecting link in place of a cranked plate, as can happen with conventional roller chains. Field maintenance technicians can disconnect and rejoin the chain at any position without needing a different connecting link type, reducing both the risk of incorrect reassembly and the number of spare parts that need to be carried on site.<\/p>\n<\/div>\n

\n

Suur koormustihedus<\/h3>\n

At pitch for pitch, cranked-link chains carry higher loads than equivalent standard flat plate chains because the larger pin and bush diameter provides greater joint bearing area. The EP-SS568H series at 77.9 mm pitch reaches 515 kN average tensile strength and the EP-SS568HF3 reaches 562 kN – performance levels that would require a significantly larger pitch standard roller chain to match. This is why cranked-link chains are preferred in compact drive applications where pitch and sprocket size cannot be increased.<\/p>\n<\/div>\n

\n

Mitme plaadi variandid<\/h3>\n

F-sufiksiga variandid (F1, F2, F3, F4, F7) peegeldavad erinevaid plaatide geomeetriaid, mis on v\u00e4lja t\u00f6\u00f6tatud konkreetsete OEM-kahvelt\u00f5stukite ja t\u00f6\u00f6stuss\u00f5idukite platvormide jaoks. Erinevad tootjad m\u00e4\u00e4ravad erinevad plaatide m\u00f5\u00f5tmed, et need sobiksid nende ketiratta geomeetria ja raami vahedega. EP haldab tootmist\u00f6\u00f6riistu k\u00f5igi peamiste OEM-plaadiprofiilide jaoks ja saab toota asenduskette mis tahes variandile ilma t\u00f6\u00f6riistade minimaalset tellimust n\u00f5udmata, kui keti number on juba EP tootmisandmebaasis olemas.<\/p>\n<\/div>\n

\n

Kuumt\u00f6\u00f6deldud legeerterasest komponendid<\/h3>\n

K\u00f5ik EP v\u00e4ntl\u00fcliga ketiplaadid on p\u00e4rast vormimist kuumt\u00f6\u00f6deldud, et saavutada vajalik t\u00f5mbetugevuse ja venivuse kombinatsioon. Tihvtid on l\u00e4bi karastatud ja lihvitud legeerterasest. Puksid (t\u00e4hega (*) t\u00e4histatud puksketi variantide puhul) on pealiskarastatud ja lihvitud. Rullikud (rullketi variantide puhul) on t\u00e4ppis treitud ja l\u00e4bi karastatud. P\u00e4rast keti kokkupanekut eelpingutatakse s\u00f5lm, et see sobiks k\u00f5igi liigeste vahedega, v\u00e4listades esialgse pikenemise paigaldamise ajal.<\/p>\n<\/div>\n

\n

Puksiketi variandid<\/h3>\n

Models marked with an asterisk (*) – including EP-*SS588F4, EP-*MXS882F2, EP-*MXS3011F1, EP-*MX603, and EP-*MXS882F2 – are bush chain variants where no separate outer roller is fitted. The bush surface contacts the sprocket tooth directly. Bush chains have a slightly lighter weight than equivalent roller chains at the same pitch and are suitable for low-speed drives where the chordal impact that would cause roller fatigue under high-speed sprocket engagement is not present. The d1 dimension for these chains is the external diameter of the bush.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Rakendused<\/h2>\n
\n
\n

Kahvelt\u00f5stuki peamised ajamid<\/h3>\n

EP-SS588, EP-SS568H, EP-2512, and EP-2510 series chains are the primary specification for forklift truck main drive and mast chain applications. Forklift drives are among the most demanding for chain – very high load at low speed, frequent reversals under full load, exposure to contamination, and the requirement for very long service life between replacements. The cranked-link geometry provides the high joint bearing area needed to achieve this service life in the compact drive configuration of a forklift transmission.<\/p>\n<\/div>\n

\n

P\u00f5llumajandustehnika<\/h3>\n

EP-MXS432, EP-1409F1, EP-R3112, and EP-SS2065 series cranked-link chains for combine harvester threshing drum drives, header auger drives, and grain tank unloading drives. These applications combine intermittent very high torque peaks – particularly when the drum processes a dense section of crop – with the need for compact drive geometry and long field service life. The cranked-link design handles the shock loading better than equivalent flat plate chains in these conditions.<\/p>\n<\/div>\n

\n

T\u00f6\u00f6stuss\u00f5idukid ja ehitusmasinad<\/h3>\n

EP-2010, EP-2010H, EP-2010SH, EP-2512 ja EP-SS568H seeriad t\u00f6\u00f6stuss\u00f5idukite l\u00f5pp\u00fclekanneteks, konteinerit\u00f5stukite peakettideks, konteinerik\u00e4itlusseadmete p\u00f6\u00f6rdajamiteks ja raskete ehitusmasinate keti\u00fclekanneteks. Need rakendused n\u00f5uavad ketilt v\u00e4ga suurt t\u00f5mbetugevust, mis peab sobima olemasoleva ketiratta geomeetriaga. EP-SS568HF3 keskmise t\u00f5mbetugevusega 562 kN sobib eriti h\u00e4sti selle kategooria k\u00f5ige raskemate rakenduste jaoks.<\/p>\n<\/div>\n<\/div>\n

\"Ever-Poweri<\/p>\n

Sobivad ketirattad ja muud ketit\u00fc\u00fcbid<\/h2>\n
\n
\n

\"Ever-Poweri<\/p>\n

Matching sprockets for EP cranked-link chain series – including forklift drive sprockets in C45 and alloy steel with OEM-matched tooth profiles – are available through our partner site sprocket-chain.net<\/a>.<\/p>\n

Vaata sobivaid ketirattaid \u2192<\/a><\/p>\n

\n
\n

Muud ketid<\/h3>\n
\n
\n

\"Korea<\/p>\n

Roostevabast terasest ketid<\/a><\/h3>\n

SUS304 ja SUS316L rullketid toidu-, farmaatsia- ja s\u00f6\u00f6vitavate keskkondade jaoks.<\/p>\n

Vaatevahemik<\/a><\/p>\n<\/div>\n

\n

\"Korea<\/p>\n

P\u00f5llumajandusketid<\/a><\/h3>\n

CA-, CC- ja S-seeria kombainidele, pressidele ja p\u00f5llukultuuride k\u00e4itlemise masinatele. Standard ISO 487.<\/p>\n

Vaatevahemik<\/a><\/p>\n<\/div>\n

\n

\"Korea<\/p>\n

Inseneriketid<\/a><\/h3>\n

WH-keevitatud terasest, valatud ja \u00fcmarl\u00fclidega ketid tsemendi, kaevandamise ja raskete seadmete transportimiseks.<\/p>\n

Vaatevahemik<\/a><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Korduma kippuvad k\u00fcsimused<\/h2>\n
\n
\nMis on v\u00e4ntl\u00fcliga kett ja mille poolest see erineb tavalisest rullketist?<\/summary>\n
A standard roller chain uses two different plate profiles: flat inner plates with the bush pressed in, and flat outer plates with the pin pressed in. A cranked-link chain uses one plate profile for all links – the plate is bent (cranked) outward at the pin hole, so the pin diameter can be larger than the inner width would normally allow in a flat plate design. This means the chain can carry a larger pin and bush at the same pitch, giving higher joint bearing area and tensile strength without increasing chain width or pitch. The practical effect is that a cranked-link chain provides higher load capacity in the same mounting envelope as a standard chain.<\/div>\n<\/details>\n
\nMida t\u00e4hendavad F-sufiksiga numbrid (F1, F2, F3, F4, F7)?<\/summary>\n
F-sufiksinumbrid t\u00e4histavad erinevaid plaadi geomeetria variante, mis on v\u00e4lja t\u00f6\u00f6tatud konkreetsete OEM-seadmete tootjate jaoks. Erinevad kahvelt\u00f5stukite ja t\u00f6\u00f6stuss\u00f5idukite OEM-id m\u00e4\u00e4ravad sama nominaalse sammuga keti jaoks veidi erinevad plaadi laiused, plaadi k\u00f5rgused, sisemised laiused ja tihvti pikkused, et need vastaksid nende patenteeritud ketiratta geomeetriale, raami vahedele ja kinnituskonfiguratsioonidele. EP haldab tootmist\u00f6\u00f6riistu k\u00f5igi tootevaliku peamiste F-sufiksi variantide jaoks. Asendusketi tellimisel t\u00e4psustage alati t\u00e4ielik EP mudelinumber, sealhulgas F-sufiks, et tagada m\u00f5\u00f5tmete \u00fchilduvus olemasolevate ketirataste ja ajami konfiguratsiooniga.<\/div>\n<\/details>\n
\nKas ma saan kulunud keti n\u00e4idise p\u00f5hjal tuvastada asendusketi?<\/summary>\n
Jah. Saatke EP-le m\u00f5\u00f5tmete m\u00f5\u00f5tmiseks v\u00e4hemalt kolmest \u00fchendatud l\u00fclist koosnev n\u00e4idis. EP v\u00f5etavad peamised m\u00f5\u00f5tmised on: samm (3 tihvti keskpunkti vahel, jagatud 2-ga), rulli v\u00f5i puksi l\u00e4bim\u00f5\u00f5t, plaatide vaheline sisemine laius \u00fchenduskohas, tihvti l\u00e4bim\u00f5\u00f5t, plaadi kogus\u00fcgavus (h2) ja plaadi paksus. Nende m\u00f5\u00f5tmiste p\u00f5hjal tuvastab EP tootevalikust k\u00f5ige l\u00e4hedasema vaste ja kontrollib \u00f5iget EP mudelinumbrit. Kiireloomuliste asenduste korral m\u00f5\u00f5tke samm, asetades 10 tihvti tasasele pinnale aukude ritta ja m\u00f5\u00f5tes v\u00e4limiste tihvtide vahelt, jagades tulemuse 9-ga, et saada keskmine samm. M\u00f5\u00f5tke ka rulli l\u00e4bim\u00f5\u00f5tu ja sisemist laiust nihikuga ning lisage keti esi- ja k\u00fclgvaates tehtud fotod.<\/div>\n<\/details>\n
\nMis vahe on H- ja SH-variantidel (nt EP-2010, EP-2010H, EP-2010SH)?<\/summary>\n
The base designation (EP-2010) uses the standard plate thickness for that chain series. The H variant (EP-2010H) uses a heavier plate – typically 20% to 35% thicker – giving higher fatigue resistance and a higher tensile strength rating. The SH variant (EP-2010SH) uses a super-heavy plate – even thicker than the H variant – for the most demanding applications where the standard and H variants have been found to have insufficient plate life. The H and SH variants have the same pitch and roller diameter as the base chain, so they fit the same sprockets; the plate thickness change does not affect sprocket engagement.<\/div>\n<\/details>\n
\nKuidas m\u00e4\u00e4ritakse v\u00e4ntl\u00fcliga kette kahvelt\u00f5stukite ja s\u00f5idukite rakendustes?<\/summary>\n
Most forklift and industrial vehicle cranked-link chain drives use a combination of initial factory-applied grease and periodic field lubrication with chain oil applied by brush or spray at each maintenance interval. Unlike high-speed power transmission drives that can use drip oilers or bath lubrication, forklift drives typically operate at very low speed in contaminated environments where conventional lubrication systems are impractical. EP recommends using a penetrating chain lubricant that can reach the pin-bush interface rather than a heavy grease that stays on the outer surface. Apply lubricant to the chain as it is slowly rotated through the drive to reach all joint positions. Frequency depends on operating environment – at minimum, lubricate at each planned maintenance interval for the vehicle.<\/div>\n<\/details>\n
\nKas saate tarnida mittestandardseid variante, mida spetsifikatsioonitabelis pole n\u00e4idatud?<\/summary>\n
Yes. The specification table shows the standard EP production programme for cranked-link chains. For chain models not listed – whether from other manufacturers, or custom configurations with non-standard pitch, inner width, or plate geometry – EP can produce replacement chains from a dimensional survey of a sample chain or from a customer drawing. Minimum order for non-standard cranked-link chains is typically 5 metres or one complete circuit, whichever is greater. Lead time for non-standard variants is 15 to 25 working days depending on the tooling required. For very high volume requirements, EP can hold non-standard variants as managed stock.<\/div>\n<\/details>\n<\/div>\n

Mida meie kliendid \u00fctlevad<\/h2>\n
\n
\n

\u2605\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We operate a fleet of 140 counterbalance forklifts across three warehouses. We switched to EP-SS568H chains for our 7-tonne units two years ago. Average chain replacement interval has gone from 4,500 hours to 7,200 hours. The dimensional consistency is excellent – we have never needed to adjust sprocket centres after an EP chain installation.”<\/p>\n

DK, autopargi juht<\/strong>
\nSouth Korea – Logistics Centre<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We maintain combine harvesters for a large cooperative. The EP-SS2065 chains for threshing drum drives have given us two full harvests without replacement. The previous chains from another supplier needed replacement mid-season in year 1. The EP chains showed 1.4% elongation at the end of the second harvest, still within limit.”<\/p>\n

MT, teenindusjuht<\/strong>
\nFrance – Agricultural Machinery Dealer<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We needed EP-2512F4 chains as OEM replacement for a heavy reach stacker fleet. EP identified the chain from our sample within 3 working days, confirmed the dimensional match, and shipped 8 complete circuit lengths within 12 working days. The chains fitted without adjustment. We now hold EP-2512F4 on our approved vendor list for this application.”<\/p>\n

JL, hankejuht<\/strong>
\nNetherlands – Port Terminal Operator<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We distribute forklift parts across Southeast Asia. EP cranked-link chains cover over 85% of the models we encounter in the field. The batch-to-batch consistency is the key advantage – our technicians know that an EP chain will fit the first time without measuring every individual chain. That reliability is worth more than a small price difference.”<\/p>\n

CS, tehniline direktor<\/strong>
\nThailand – Forklift Parts Distributor<\/p>\n<\/div>\n<\/div>\n

\n

\"\"<\/p>\n

\n

K\u00fcsi hinnapakkumist EP v\u00e4ntl\u00fcliga kettidele<\/h3>\n

Esitage spetsifikatsioonitabelist t\u00e4ielik EP-mudeli number (sh k\u00f5ik F-, H- v\u00f5i SH-j\u00e4reliited), kogus meetrites v\u00f5i l\u00fclide arv ja kas on vaja \u00fchendusl\u00fclisid. Mittestandardsete kettide puhul, mida tabelis ei ole n\u00e4idatud, palun esitage n\u00e4idiskett v\u00f5i m\u00f5\u00f5tjoonis. Meie meeskond vastab \u00fche t\u00f6\u00f6p\u00e4eva jooksul.<\/p>\n

K\u00fcsi pakkumist kohe<\/a>
\nK\u00f5ik veoahela tooted<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-MXS, EP-SS, EP-2512, EP-2510, EP-R ja eriseeriate tugevad v\u00e4ntl\u00fclidega ketid n\u00f5udlikuks j\u00f5u\u00fclekandeks kahvelt\u00f5stukitel, t\u00f6\u00f6stuss\u00f5idukitel, p\u00f5llumajandusmasinatel ja rasketel seadmetel. Samm 42,01 mm kuni 78,10 mm. Keskmine t\u00f5mbetugevus kuni 560 kN.<\/p>","protected":false},"featured_media":215,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-216","product","type-product","status-publish","has-post-thumbnail","product_cat-driving-chains","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product\/216","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/comments?post=216"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/media\/215"}],"wp:attachment":[{"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/media?parent=216"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product_brand?post=216"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product_cat?post=216"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product_tag?post=216"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}