{"id":206,"date":"2026-07-24T06:13:54","date_gmt":"2026-07-24T06:13:54","guid":{"rendered":"https:\/\/5speedtransmission.com\/?post_type=product&p=206"},"modified":"2026-07-24T06:13:54","modified_gmt":"2026-07-24T06:13:54","slug":"heavy-duty-series-roller-chains","status":"publish","type":"product","link":"https:\/\/5speedtransmission.com\/et\/toode\/heavy-duty-series-roller-chains\/","title":{"rendered":"Raskeveokite seeria rullketid"},"content":{"rendered":"
\n
\n
\n

H-seeria<\/p>\n

ja BH \/ BHF mittestandardne<\/p>\n<\/div>\n

\n

9,525 kuni 76,2 mm<\/p>\n

K\u00f5rgusvahemik<\/p>\n<\/div>\n

\n

Kuni 1650 kN<\/p>\n

Kolmekordne purunemiskoormus<\/p>\n<\/div>\n

\n

ISO 9001<\/p>\n

Sertifitseeritud kvaliteet<\/p>\n<\/div>\n<\/div>\n

Heavy Duty Roller Chain – Product Overview<\/h2>\n
\n
\n

Korea Ever-Power raskeveokite seeria rullketid<\/a> are an uprated variant of the standard short pitch roller chain range, designed for applications where the operating load, shock loading severity, or duty cycle exceeds what the standard A series can comfortably handle at the same pitch. The heavy duty designation refers to thicker link plates – typically 25% to 40% heavier than the standard A series plate at the same pitch – combined with larger diameter pins and in some sizes an increased inner width, all while maintaining the same pitch so that the chain can run on standard pitch sprockets without any modification to the sprocket or drive configuration.<\/p>\n

EP H-seeria katab keti suurusi *35H kuni 240H lihtsas (\u00fcheahelaline, j\u00e4relliide -1), dupleks- (kaheahelaline, j\u00e4relliide -2) ja tripleks- (kolmeahelaline, j\u00e4relliide -3) konfiguratsioonis. H-j\u00e4relliide on t\u00f6\u00f6stusstandardne t\u00e4histus vastupidavale plaadigeomeetriale: 35H ketil on sama 9,525 mm samm ja sama rulli l\u00e4bim\u00f5\u00f5t kui tavalisel 35 ketil, kuid l\u00fcliplaadid on paksemad, mis annab sellele k\u00f5rgema t\u00f5mbetugevuse ja pikema v\u00e4simuse vastupidavuse korduva koormuse korral. See on oluline sellistes rakendustes nagu p\u00f5llumajanduslike kombainide peaajamid, palgiplatvormide ajamid, pakkemasinate peaajamid ja \u00fcldised t\u00f6\u00f6stuslikud ajamid, mis k\u00e4ivituvad ja seiskuvad koormuse all, kogevad \u00fchendatud masinate vibratsiooni v\u00f5i peavad taluma l\u00f6\u00f6ke, mis tekivad siis, kui ketist koormuse \u00fcmberp\u00f6\u00f6ramise ajal l\u00f5tk ootamatult v\u00e4lja tuleb.<\/p>\n

Beyond the standard H series, Korea Ever-Power manufactures a comprehensive range of non-standard heavy duty chains under the BH and BHF designations. These are chains developed for specific OEM applications where neither the standard A series nor the standard H series geometry exactly matches the sprocket tooth form or structural requirement of the original equipment. The BH range includes straight side plate variants (where the inner and outer plates are the same flat profile rather than the usual waisted figure-eight shape), flanged plate variants for guide track applications, and combination chains with mixed roller and bush positions for specific machine functions. Bush chains within both the H series and the BH range are marked with an asterisk (*) – for these chains the d1 dimension in the specification table refers to the external diameter of the bush rather than an outer roller diameter, because no separate outer roller is fitted.<\/p>\n

Korea Ever-Poweri raskeveokite kettide tootmisliin kasutab samu k\u00fclmvormimis- ja kuumt\u00f6\u00f6tlusprotsesse nagu A-seeria, kasutades l\u00e4bikarastatud legeerterasest tihvte, karastatud pukse ja kuumt\u00f6\u00f6deldud plaate. H-seeria raskemad plaadisektsioonid vajavad \u00fchtlaste s\u00fcdamiku omaduste saavutamiseks pikemaid kuumt\u00f6\u00f6tlusts\u00fckleid ja suuremad tihvtide l\u00e4bim\u00f5\u00f5dud vajavad lihvimisel t\u00e4psemat m\u00f5\u00f5tmete kontrolli, et s\u00e4ilitada \u00f5ige tihvtide ja pukside vaheline kaugus hea m\u00e4\u00e4rdefilmi p\u00fcsivuse tagamiseks. Igale kokkupandud H-seeria ketile rakendatakse enne sammu m\u00f5\u00f5tmist eelkoormust, et v\u00e4ltida paigaldusvenitust, samamoodi nagu standardse A-seeria valiku puhul. H-seeria \u00fchendusl\u00fclid kasutavad kergemates standardkettides kasutatava vedruklambri asemel splint- v\u00f5i splintkinnitust, mis peegeldab suuremat vuukide koormust raskeveokite kasutamisel.<\/p>\n<\/div>\n

\"Korea<\/div>\n<\/div>\n
\n

M\u00f5\u00f5tmete v\u00f5ti:<\/strong> P = Samm | d1 = Rulli l\u00e4bim\u00f5\u00f5t max (pukskett: v\u00e4lispukskett) | b1 = Sisemine laius plaatide vahel min | d2 = Tihvti l\u00e4bim\u00f5\u00f5t max | L = Tihvti pikkus max | Lc = Tihvti \u00fchendusl\u00fcli pikkus max | h2 = Sisemise plaadi s\u00fcgavus max | T = Plaadi paksus max | Pt = P\u00f5ikisamm (dupleks\/tripleks) | Q = Min t\u00f5mbetugevus kN\/lbf | Q0 = Keskmine t\u00f5mbetugevus kN | q = Kaal kg\/m | * = Pukskett | F = Sirged (lamedad) k\u00fclgplaadid<\/p>\n<\/div>\n

H Series Simplex – Single Strand (suffix -1)<\/h2>\n

Tugevdatud plaatide geomeetria. Sama samm kui ANSI A-seeria ekvivalentidel. Paksemad plaadid ja suuremad tihvtid annavad suurema t\u00f5mbetugevuse ja v\u00e4simuskindluse l\u00f6\u00f6kkoormuse korral. T\u00e4rniga (*) t\u00e4histatud ketid on puksketid.<\/p>\n

\"veoahela<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI nr.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nTmax<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
EP-*35H-1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n13.3<\/td>\n14.3<\/td>\n9.00<\/td>\n1.50<\/td>\n7.9\/1795<\/td>\n10.8<\/td>\n0.41<\/td>\n<\/tr>\n
40H-1<\/strong><\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.00<\/td>\n2.03<\/td>\n14.1\/3205<\/td>\n19.1<\/td>\n0.82<\/td>\n<\/tr>\n
50H-1<\/strong><\/td>\n15.875<\/td>\n10.16<\/td>\n9.40<\/td>\n5.08<\/td>\n22.1<\/td>\n23.4<\/td>\n15.09<\/td>\n2.42<\/td>\n22.2\/5045<\/td>\n30.2<\/td>\n1.25<\/td>\n<\/tr>\n
60H-1<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.00<\/td>\n3.25<\/td>\n31.8\/7227<\/td>\n42.7<\/td>\n1.87<\/td>\n<\/tr>\n
80H-1<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n36.2<\/td>\n37.7<\/td>\n24.00<\/td>\n4.00<\/td>\n56.7\/12886<\/td>\n71.4<\/td>\n3.10<\/td>\n<\/tr>\n
100H-1<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n43.6<\/td>\n46.9<\/td>\n30.00<\/td>\n4.80<\/td>\n88.5\/20114<\/td>\n112.4<\/td>\n4.52<\/td>\n<\/tr>\n
120H-1<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n53.5<\/td>\n57.5<\/td>\n35.70<\/td>\n5.60<\/td>\n127.0\/28864<\/td>\n160.9<\/td>\n6.60<\/td>\n<\/tr>\n
140H-1<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n57.6<\/td>\n62.2<\/td>\n41.00<\/td>\n6.40<\/td>\n172.4\/39182<\/td>\n217.3<\/td>\n8.30<\/td>\n<\/tr>\n
160H-1<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n68.2<\/td>\n73.0<\/td>\n47.80<\/td>\n7.20<\/td>\n226.8\/51545<\/td>\n285.8<\/td>\n10.30<\/td>\n<\/tr>\n
180H-1<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n75.9<\/td>\n81.6<\/td>\n53.60<\/td>\n8.00<\/td>\n281.0\/63863<\/td>\n341.8<\/td>\n14.83<\/td>\n<\/tr>\n
200H-1<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n86.6<\/td>\n93.5<\/td>\n60.00<\/td>\n9.50<\/td>\n353.8\/80409<\/td>\n444.5<\/td>\n19.16<\/td>\n<\/tr>\n
240H-1<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n109.6<\/td>\n115.9<\/td>\n72.30<\/td>\n12.70<\/td>\n510.3\/115977<\/td>\n622.5<\/td>\n30.40<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Duplex – Two Strand (suffix -2)<\/h2>\n

Tugevdatud dupleksketid kahekordistavad kandev\u00f5imet sama sammu juures. Pt = p\u00f5ikisuunaline samm kiudude keskpunktide vahel. Saadaval sammuga 60H kuni 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI nr.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nTmax<\/th>\nPunkt (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
60H-2<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n55.3<\/td>\n57.1<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n63.6\/14455<\/td>\n84.5<\/td>\n3.71<\/td>\n<\/tr>\n
80H-2<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n68.8<\/td>\n70.3<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n113.4\/25773<\/td>\n145.3<\/td>\n6.15<\/td>\n<\/tr>\n
100H-2<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n82.7<\/td>\n86.0<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n177.0\/40227<\/td>\n225.9<\/td>\n9.03<\/td>\n<\/tr>\n
120H-2<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n102.4<\/td>\n106.4<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n254.0\/57727<\/td>\n322.7<\/td>\n13.13<\/td>\n<\/tr>\n
140H-2<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n109.8<\/td>\n114.4<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n344.8\/78364<\/td>\n437.7<\/td>\n16.60<\/td>\n<\/tr>\n
160H-2<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n130.1<\/td>\n134.9<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n453.6\/103091<\/td>\n571.6<\/td>\n20.20<\/td>\n<\/tr>\n
180H-2<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n146.5<\/td>\n155.6<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n562\/127726<\/td>\n680.0<\/td>\n29.20<\/td>\n<\/tr>\n
200H-2<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n164.9<\/td>\n171.8<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n707.6\/160818<\/td>\n894.9<\/td>\n38.11<\/td>\n<\/tr>\n
240H-2<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n212.6<\/td>\n223.1<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1000\/227270<\/td>\n1200.0<\/td>\n60.50<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Triplex – Three Strand (suffix -3)<\/h2>\n

Tugevad kolmekordse kandev\u00f5imega triplex-ketid. Pt kehtib iga k\u00fclgneva kiu paari vahel. Saadaval sammuga 60H kuni 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI nr.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nTmax<\/th>\nPunkt (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
60H-3<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n81.4<\/td>\n83.2<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n95.4\/21682<\/td>\n113.9<\/td>\n5.54<\/td>\n<\/tr>\n
80H-3<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n101.4<\/td>\n102.9<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n170.1\/38659<\/td>\n203.5<\/td>\n9.42<\/td>\n<\/tr>\n
100H-3<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n121.8<\/td>\n125.1<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n265.5\/60341<\/td>\n314.8<\/td>\n12.96<\/td>\n<\/tr>\n
120H-3<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n151.2<\/td>\n155.2<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n381.0\/86591<\/td>\n444.7<\/td>\n19.64<\/td>\n<\/tr>\n
140H-3<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n162.0<\/td>\n166.6<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n517.2\/117545<\/td>\n598.4<\/td>\n24.90<\/td>\n<\/tr>\n
160H-3<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n192.0<\/td>\n196.8<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n680.4\/154636<\/td>\n787.3<\/td>\n30.10<\/td>\n<\/tr>\n
180H-3<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n215.7<\/td>\n224.8<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n843\/191589<\/td>\n1011.0<\/td>\n44.10<\/td>\n<\/tr>\n
200H-3<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n243.2<\/td>\n250.1<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n1061.4\/241227<\/td>\n1228.2<\/td>\n57.06<\/td>\n<\/tr>\n
240H-3<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n313.8<\/td>\n324.3<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1500\/340905<\/td>\n1650.0<\/td>\n91.00<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Mittestandardsed raskeveokite ketid (BH \/ BHF seeria)<\/h2>\n

Mittestandardsed raskeveokite ketid, mis on toodetud EP-kettide numeratsiooni j\u00e4rgi spetsiifiliste OEM-rakenduste jaoks. H\u00f5lmab sirgete k\u00fclgplaatidega variante (t\u00e4histatud F-ga), \u00e4\u00e4risplaatidega variante ja kombineeritud konstruktsioone. * t\u00e4histab puksketti; d1 on nende puhul pukskettide v\u00e4lisl\u00e4bim\u00f5\u00f5t. F t\u00e4histab sirgeid (lamedat) k\u00fclgplaate.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
EP keti nr.<\/th>\nP (mm)<\/th>\nd1 max<\/th>\nb1 min<\/th>\nd2 max<\/th>\nL max<\/th>\nLc max<\/th>\nh2 max<\/th>\nt\/T<\/th>\nQ min (kN\/lbf)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
EP-04BH<\/td>\n6.000<\/td>\n4.00<\/td>\n2.80<\/td>\n1.85<\/td>\n8.4<\/td>\n9.4<\/td>\n5.0<\/td>\n0.90<\/td>\n5.00\/1136<\/td>\n0.14<\/td>\n<\/tr>\n
EP-*06BH<\/td>\n9.525<\/td>\n6.35<\/td>\n5.72<\/td>\n3.28<\/td>\n14.4<\/td>\n15.4<\/td>\n8.2<\/td>\n1.60<\/td>\n11.25\/2557<\/td>\n0.51<\/td>\n<\/tr>\n
*35HF1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n14.6<\/td>\n15.6<\/td>\n9.0<\/td>\n1.80<\/td>\n9.00\/2023<\/td>\n0.47<\/td>\n<\/tr>\n
EP-08AHF1<\/td>\n12.700<\/td>\n7.95<\/td>\n10.00<\/td>\n3.96<\/td>\n21.0<\/td>\n22.2<\/td>\n12.0<\/td>\n2.03<\/td>\n13.80\/3136<\/td>\n0.88<\/td>\n<\/tr>\n
EP-08BH<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n18.8<\/td>\n19.9<\/td>\n11.8<\/td>\n2.03<\/td>\n20.60\/4682<\/td>\n0.79<\/td>\n<\/tr>\n
41HF1<\/td>\n12.700<\/td>\n7.77<\/td>\n6.25<\/td>\n3.58<\/td>\n16.7<\/td>\n18.0<\/td>\n9.9<\/td>\n2.03<\/td>\n9.00\/2023<\/td>\n0.59<\/td>\n<\/tr>\n
EP-*C40HF3<\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.0<\/td>\n2.03<\/td>\n20.00\/4496<\/td>\n0.94<\/td>\n<\/tr>\n
EP-*C08BHF8<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n19.9<\/td>\n21.0<\/td>\n11.8<\/td>\n2.42\/2.03<\/td>\n25.00\/5620<\/td>\n1.04<\/td>\n<\/tr>\n
EP-10BH<\/td>\n15.875<\/td>\n10.16<\/td>\n9.65<\/td>\n5.08<\/td>\n20.2<\/td>\n21.6<\/td>\n14.7<\/td>\n1.85<\/td>\n25.00\/5681<\/td>\n1.03<\/td>\n<\/tr>\n
EP-10BHF1<\/td>\n15.875<\/td>\n10.16<\/td>\n6.45<\/td>\n5.08<\/td>\n18.0<\/td>\n19.8<\/td>\n14.7<\/td>\n2.10<\/td>\n23.60\/5305<\/td>\n1.05<\/td>\n<\/tr>\n
EP-12BH<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.2<\/td>\n26.8<\/td>\n16.0<\/td>\n2.42<\/td>\n40.00\/9091<\/td>\n1.45<\/td>\n<\/tr>\n
EP-12BHF1<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.0<\/td>\n27.2<\/td>\n16.5<\/td>\n2.50<\/td>\n44.00\/10000<\/td>\n1.46<\/td>\n<\/tr>\n
EP-12BHF2<\/td>\n19.050<\/td>\n12.07<\/td>\n13.30<\/td>\n6.10<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.72<\/td>\n<\/tr>\n
EP-12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n13.50<\/td>\n5.72<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.71<\/td>\n<\/tr>\n
EP-12BV<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n24.5<\/td>\n26.5<\/td>\n16.0<\/td>\n2.42<\/td>\n36.00\/8182<\/td>\n1.43<\/td>\n<\/tr>\n
EP-60HV<\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.0<\/td>\n3.25<\/td>\n40.00\/9090<\/td>\n2.00<\/td>\n<\/tr>\n
EP-12AHF7<\/td>\n19.050<\/td>\n11.91<\/td>\n9.50<\/td>\n5.94<\/td>\n25.9<\/td>\n27.7<\/td>\n18.0<\/td>\n3.25<\/td>\n49.00\/11015<\/td>\n1.78<\/td>\n<\/tr>\n
EP-12AHF101<\/td>\n19.050<\/td>\n11.91<\/td>\n9.40<\/td>\n5.94<\/td>\n26.3<\/td>\n28.1<\/td>\n18.0<\/td>\n3.25<\/td>\n53.00\/11914<\/td>\n1.81<\/td>\n<\/tr>\n
EP-12BHF5<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n6.10<\/td>\n25.2<\/td>\n26.8<\/td>\n17.9<\/td>\n2.42<\/td>\n40.00\/8992<\/td>\n1.60<\/td>\n<\/tr>\n
EP-*C12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.72<\/td>\n29.3<\/td>\n31.2<\/td>\n20.0<\/td>\n4.00\/3.00<\/td>\n31.40\/7059<\/td>\n2.38<\/td>\n<\/tr>\n
EP-16BH<\/td>\n25.400<\/td>\n15.88<\/td>\n17.02<\/td>\n8.90<\/td>\n35.7<\/td>\n38.9<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n3.11<\/td>\n<\/tr>\n
EP-16BHF3<\/td>\n25.400<\/td>\n15.88<\/td>\n12.70<\/td>\n8.90<\/td>\n31.6<\/td>\n35.0<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n2.90<\/td>\n<\/tr>\n
EP-*C20AHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.05<\/td>\n10.32<\/td>\n43.6<\/td>\n46.9<\/td>\n30.0<\/td>\n6.00\/4.80<\/td>\n146.00\/32821<\/td>\n5.40<\/td>\n<\/tr>\n
EP-20BH<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n26.4<\/td>\n6.00\/4.80<\/td>\n95.00\/21356<\/td>\n4.52<\/td>\n<\/tr>\n
EP-20BHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n29.2<\/td>\n6.00\/4.80<\/td>\n100.00\/33720<\/td>\n5.09<\/td>\n<\/tr>\n
EP-24BH<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n58.6<\/td>\n63.4<\/td>\n36.2<\/td>\n7.50\/6.00<\/td>\n225.00\/51136<\/td>\n9.00<\/td>\n<\/tr>\n
EP-24BHF2<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n57.8<\/td>\n62.2<\/td>\n37.0<\/td>\n7.20\/6.00<\/td>\n225.40\/51226<\/td>\n9.06<\/td>\n<\/tr>\n
EP-24BHF5<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n64.6<\/td>\n69.1<\/td>\n36.2<\/td>\n9.00\/7.50<\/td>\n270.00\/61344<\/td>\n10.60<\/td>\n<\/tr>\n
EP-28BH<\/td>\n44.450<\/td>\n27.94<\/td>\n30.99<\/td>\n15.90<\/td>\n69.6<\/td>\n75.0<\/td>\n36.7<\/td>\n8.50\/7.20<\/td>\n200.00\/44960<\/td>\n9.99<\/td>\n<\/tr>\n
EP-32AHF1<\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n15.90<\/td>\n75.4<\/td>\n80.3<\/td>\n47.8<\/td>\n9.00<\/td>\n222.40\/49996<\/td>\n13.36<\/td>\n<\/tr>\n
EP-32BH<\/td>\n50.800<\/td>\n29.21<\/td>\n30.99<\/td>\n17.81<\/td>\n72.0<\/td>\n77.2<\/td>\n42.0<\/td>\n8.00<\/td>\n250.00\/56200<\/td>\n11.26<\/td>\n<\/tr>\n
EP-32BHF1<\/td>\n50.800<\/td>\n29.21<\/td>\n31.55<\/td>\n17.81<\/td>\n69.9<\/td>\n74.7<\/td>\n48.2<\/td>\n8.00\/7.15<\/td>\n350.00\/78680<\/td>\n13.20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

\"\"<\/p>\n

\n

Millal valida raskeveokite seeria tavalise A-seeria asemel<\/h2>\n
\n
\n

Sagedane k\u00e4ivitamine ja seiskamine koormuse all<\/h3>\n

Iga k\u00e4ivitusts\u00fckkel tekitab ketis t\u00f5mbel\u00f6\u00f6gi, kuna l\u00f5dvestunud k\u00fclg j\u00e4rsult pingule t\u00f5mmatakse. H-seeria paksematel plaatidel on suurem ristl\u00f5ikepind ja seega ka k\u00f5rgem v\u00e4simuspiir korduvate t\u00f5mbets\u00fcklite korral. Rakendused, mis k\u00e4ivituvad ja peatuvad koormuse all rohkem kui 20 korda tunnis, peaksid m\u00e4\u00e4rama v\u00e4hemalt H-seeria.<\/p>\n<\/div>\n

\n

Haagitud masinate m\u00f5ju<\/h3>\n

Kolbpressid, stantspressid, l\u00f5uapurustid ja suhkrurooveskid tekitavad k\u00f5ik oma ajamiahela kaudu teravaid l\u00f6\u00f6kimpulsse. Selliste rakenduste teenindustegur ulatub standardse A-seeria puhul tavaliselt 1,5\u20132,0-ni, mist\u00f5ttu on H-seeria \u00f5ige valik ilma suurema sammu v\u00f5i rohkemate kiudpinkide kasutamiseta.<\/p>\n<\/div>\n

\n

P\u00f5llumajanduslikud rasked ajamid<\/h3>\n

Kombaini peaajamid, p\u00f5hupuistajad ja peksutrumli ajamid \u00fchendavad k\u00f5ik suure vahelduva koormuse saagi s\u00f6\u00f6mise ajal tekkivate l\u00f6\u00f6kidega. H-seeria on laialdaselt valitud nende ajamite originaalvaruosade tootjate varustuseks, kuna paksemad plaadid pikendavad kasutusiga p\u00f5llutingimustes, kus keti vahetamine on kallis ja ebamugav.<\/p>\n<\/div>\n

\n

K\u00f5rge vibratsiooniga keskkond<\/h3>\n

Vibreerivad s\u00f5elad, vibreerivad s\u00f6\u00f6tjad, vibreerivad konveierid ja purustid edastavad k\u00f5ik k\u00f5rgsageduslikku vibratsiooni ajamiketti l\u00e4bi ketiratta ja v\u00f5lli. V\u00e4simuspraod l\u00fcliplaatides tekivad k\u00f5ige kergemini tihvtiaugu servas vahelduva pinge all. H-seeria paksem plaat jaotab selle pinge suuremale pinnale, takistades pragude teket.<\/p>\n<\/div>\n

\n

Samad ketirattad, suurem kandev\u00f5ime<\/h3>\n

H-seeria kasutab sama hammasrataste sammu kui A-seeria vaste, seega sobib see samadele ketiratastele ilma ajami paigutust muutmata. Kui tavalise A-seeria keti kasutusiga on osutunud ebapiisavaks, n\u00f5uab H-seeriale uuendamine ainult keti vahetamist, mitte ketirataste keskpunktide, v\u00f5llide v\u00f5i kaitsete \u00fcmberkujundamist.<\/p>\n<\/div>\n

\n

Mittestandardsed OEM-n\u00f5uded<\/h3>\n

Mittestandardsed BH ja BHF seeriad on m\u00f5eldud originaalvaruosade tootjate (OEM) asendamiseks, kui masin oli algselt projekteeritud vastavalt patenteeritud keti spetsifikatsioonile, mida standardne H-seeria ei kata. Saadaval on sirged k\u00fclgplaadid (BHF), \u00e4\u00e4risplaadid, laiemad sisemised laiused v\u00f5i kombineeritud rulliku ja puksi asendid. Pakkumise saamiseks esitage n\u00e4idiskett v\u00f5i joonis.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Rakendused<\/h2>\n
\n
\n

P\u00f5llumajandustehnika<\/h3>\n

EP 40H kuni 100H simplex-ketid on kombainide peaajamite, p\u00f5hupuisturite ajamite ja teravilja tigude ajamite standardspetsifikatsioon. 40H-1 on kogu maailmas p\u00f5llumajandusmasinates enimkasutatav raskeveokite kett. Suurem plaadipaksus neelab saagi s\u00f6\u00f6tmisest ja etteandemehhanismi sattuvatest kividest tuleneva l\u00f6\u00f6gikoormuse, andes p\u00f5llule samades tingimustes ligikaudu 40% v\u00f5rra pikema kasutusea kui samav\u00e4\u00e4rsel standardsel 40-ketil.<\/p>\n<\/div>\n

\n

Pressi- ja stantsimisseadmed<\/h3>\n

Mehaanilised pressid, stantspressid ja stantsimismasinad edastavad stantsi kokkupuute ja l\u00e4bimurde hetkel terava l\u00f6\u00f6giimpulsi l\u00e4bi ajamiahela. EP 80H-1, 100H-1 ja 120H-1 simpleks- ja dupleksketid on tavaliselt ette n\u00e4htud pressi peaajamite ja hooratta ajamite jaoks. Raskem plaadiosa on vastupidavam v\u00e4simuspragunemisele, mis muidu tekiks tihvtiava servas korduvate suure amplituudiga pingets\u00fcklite all.<\/p>\n<\/div>\n

\n

Kaevandamine ja karj\u00e4\u00e4r<\/h3>\n

EP 120H kuni 240H ketid esmase purusti ajamikettidele, vibreerivate s\u00f5elte ajamitele ja \u00e4\u00e4riss\u00f6\u00f6turi ajamikettidele kaevandus- ja karj\u00e4\u00e4ritehastes. Duplex 120H-2 ja 160H-2 on l\u00f5ualuupurusti peaajamite standardsuuruste vahemik. H-seeria on ette n\u00e4htud ka s\u00f6e ettevalmistusjaamade ajamitele, kus vesi ja s\u00f6etolm saastavad m\u00e4\u00e4rdeainet ning ajam t\u00f6\u00f6tab muutuva koormuse all s\u00f6e etteandekiiruse k\u00f5ikumise t\u00f5ttu.<\/p>\n<\/div>\n

\n

Suhkrut\u00f6\u00f6stus<\/h3>\n

Sugar mill main drives and cane elevator drives use EP heavy duty chains in the 100H to 200H range. The juice environment is highly corrosive to steel chain, and the cane ingestion load is unpredictable – a stone or dense root clump entering the mill can momentarily spike the load to several times the rated running load. The H series provides the combination of corrosion resistance (through correct lubrication specification) and fatigue strength required for these demanding tropical mill conditions.<\/p>\n<\/div>\n<\/div>\n

\"Korea<\/p>\n

Sobivad ketirattad ja muud ketit\u00fc\u00fcbid<\/h2>\n
\n
\n

\"Ever-Poweri<\/p>\n

Igale EP keti suurusele sobivad ketirattad on saadaval meie partneri veebisaidilt. sprocket-chain.net<\/a>K\u00f5ik ANSI B29.1 ja ISO 606 hambavormid, simpleks kuni 8-kiuline, C45 s\u00fcsinikterasest ja legeerterasest, eelava ja viimistletud avaga rummu konstruktsioonid.<\/p>\n

Vaata sobivaid ketirattaid \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

\n

Muud ketid<\/h3>\n
\n
\n

\"Korea<\/p>\n

Roostevabast terasest ketid<\/a><\/h3>\n

SUS304 ja SUS316L rullketid toidu-, farmaatsia- ja s\u00f6\u00f6vitavate keskkondade jaoks.<\/p>\n

Vaatevahemik<\/a><\/p>\n<\/div>\n

\n

\"Korea<\/p>\n

P\u00f5llumajandusketid<\/a><\/h3>\n

CA-, CC- ja S-seeria kombainidele, pressidele ja p\u00f5llukultuuride k\u00e4itlemise masinatele. Standard ISO 487.<\/p>\n

Vaatevahemik<\/a><\/p>\n<\/div>\n

\n

\"Korea<\/p>\n

Inseneriketid<\/a><\/h3>\n

WH-keevitatud terasest, valatud ja \u00fcmarl\u00fclidega ketid tsemendi, kaevandamise ja raskete seadmete transportimiseks.<\/p>\n

Vaatevahemik<\/a><\/p>\n<\/div>\n<\/div>\n

\"\"<\/div>\n<\/div>\n

Korduma kippuvad k\u00fcsimused<\/h2>\n
\n
\nMis vahe on H-seerial ja tavalisel A-seerial sama sammuga?<\/summary>\n
The H series uses thicker link plates than the standard A series at the same pitch. For example, a standard 60 (08A) chain has a plate thickness of 2.42 mm; the 60H chain has a plate thickness of 3.25 mm – approximately 34% thicker. The larger plate cross-section gives a higher minimum tensile strength (31.8 kN versus about 31.8 kN for the standard – the gain is primarily in fatigue life and plate thickness rather than tensile strength at the smaller sizes, becoming more pronounced at 80 and above where the H series clearly outperforms the standard chain). The pin diameter and roller diameter remain the same, so H series chains run on standard pitch sprockets without any modification.<\/div>\n<\/details>\n
\nKas ma saan oma olemasolevatel A-seeria ketiratastel kasutada H-seeria kette?<\/summary>\n
Jah, H-seeria ketid t\u00f6\u00f6tavad standardsetel ANSI A-seeria ketiratastel ilma igasuguste modifikatsioonideta. H-seeria samm, rulli l\u00e4bim\u00f5\u00f5t ja sisemine laius vastavad sama ketinumbriga A-seeria ekvivalentidele. Ainus erinevus on plaadi paksus ja see ei m\u00f5juta ketiratta haardumist, kuna ketiratta hammaste kuju haakub rulli ja sisemiste plaatide, mitte v\u00e4liste plaatidega. Paksemad v\u00e4lisplaadid ulatuvad lihtsalt veidi kaugemale ketiratta hambast, mis j\u00e4\u00e4b tavap\u00e4rase konstruktsioonil\u00f5tku piiresse.<\/div>\n<\/details>\n
\nMida t\u00e4hendavad BH-seeria kettide j\u00e4relliitekoodid (BH, BHF1, BHF2 jne)?<\/summary>\n
The BH designation identifies these as heavy duty variants of the ISO B series roller chain geometry, produced by Ever-Power for specific OEM applications. The F in BHF stands for flat side plate (also called straight side plate) – a plate shape where the inner and outer plates are the same rectangular profile rather than the usual waisted figure-eight shape used in standard roller chains. The number after F identifies the specific plate profile variant (F1, F2, F3, F5 etc. are different proprietary plate dimensions used by different OEM machine manufacturers). The V suffix (as in 12BV or 60HV) identifies a chain with a specific plate profile used in high-speed applications. When ordering BH or BHF chains as replacements, always provide the complete EP chain number from the specification table and verify against a sample of the original chain.<\/div>\n<\/details>\n
\nKas H-seeria kettide m\u00e4\u00e4rimine on standardsete kettide omast erinev?<\/summary>\n
The lubrication requirements for H series chains are the same as for standard A series chains at the same pitch and speed – mineral oil applied at the pin-bush joint by drip oiler, bath, or spray system depending on chain speed. The lubrication method does not need to change when upgrading from A series to H series. What does sometimes change is the lubrication interval in severe applications: because the H series is typically specified for shock-loaded drives with more demanding duty cycles, more frequent oil replenishment may be required to maintain the oil film under high joint-load conditions. For drives with service factors above 1.5, consider a continuous drip oiler even at speeds below 1 m\/s.<\/div>\n<\/details>\n
\nMilliseid \u00fchendusl\u00fclisid kasutatakse H-seeria kettide puhul?<\/summary>\n
H-seeria ketid kasutavad vedruklambrite asemel splint\u00fchendusi, mis peegeldab suuremat vuukide koormust rasketes rakendustes. Splint\u00fchendus on l\u00f6\u00f6gikoormuse korral kindlam kui vedruklamber, mis v\u00f5ib keti agressiivse vibratsiooni korral paigast nihkuda. Kettide puhul, mille suurus on 40H kuni 60H, on standardvarustuses kahe splindiga \u00fchendusl\u00fcli. 80H ja suuremate puhul on splint\u00fchenduse alternatiivina saadaval poltidega kinnitatud \u00fchendusl\u00fcli kuuskantpoltide ja lukustusmutritega rakenduste jaoks, kus \u00fchendusl\u00fcli tuleb sageli eemaldada ja uuesti paigaldada. Vahetage \u00fchendusl\u00fcli alati iga ketivahetuse ajal v\u00e4lja, olenemata selle n\u00e4htavast seisukorrast.<\/div>\n<\/details>\n
\nKas saate tarnida mittestandardseid BH- ja BHF-kette olemasolevate masinate asendamiseks?<\/summary>\n
Jah. BH ja BHF tootesari on spetsiaalselt m\u00f5eldud OEM-asenduseks masinatele, mis kasutavad mittestandardseid keti spetsifikatsioone. Kui teie keti number on \u00fclaltoodud BH v\u00f5i BHF tabelis, esitage EP keti number, kogus meetrites v\u00f5i l\u00fclide arv ja kas \u00fchendusl\u00fcli on vaja. Kui teie ketti tabelis ei ole, saatke m\u00f5\u00f5tmete uuringuks v\u00e4hemalt 5 \u00fchendatud l\u00fclist koosnev n\u00e4idis ja EP leiab l\u00e4hima vaste v\u00f5i valmistab teie n\u00e4idism\u00f5\u00f5tmetele vastava kohandatud keti, mille minimaalne tellimuse kogus on 10 meetrit. Kiireloomuliste asenduste korral esitage: samm (m\u00f5\u00f5detuna 10 j\u00e4rjestikuse tihvti keskpunkti vahel, jagatud 10-ga), rulli l\u00e4bim\u00f5\u00f5t v\u00f5i puksi v\u00e4lisl\u00e4bim\u00f5\u00f5t, plaatide vaheline sisemine laius, tihvti l\u00e4bim\u00f5\u00f5t ja plaadi paksus. Plaadi profiilit\u00fc\u00fcbi tuvastamiseks on kasulikud ka fotod nii esipinnalt kui ka servalt.<\/div>\n<\/details>\n<\/div>\n

Mida meie kliendid \u00fctlevad<\/h2>\n
\n
\n

\u2605\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We upgraded our combine harvester main drive from standard 80 chain to EP 80H-1. The previous standard chains were needing replacement every harvest season. The 80H chains have now run for three full harvests with elongation at 1.6% – well within the 3% replacement threshold. The cost per season is significantly lower even though the EP 80H chain has a higher purchase price.”<\/p>\n

BK, autopargi insener<\/strong>
\nUkraine – Large Grain Farm<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our jaw crusher main drive uses 120H-2 duplex chains. We had a history of fatigue plate fractures with previous supplier chains approximately every 8 months. EP 120H-2 chains have been running for 19 months without any plate fracture or connecting link failure. The improvement is directly attributable to the consistent plate hardness across the batch – no soft spots.”<\/p>\n

AO, hooldusjuht<\/strong>
\nSouth Africa – Aggregate Quarry<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We needed a 12BHF2 non-standard chain to replace the original OEM specification on our packaging machine elevator drive. EP confirmed the chain from our EP chain number, delivered 5 complete circuit lengths cut and fitted with connecting links within 9 working days. The chains matched the original dimensions exactly and fitted without adjustment.”<\/p>\n

PW, insenerijuht<\/strong>
\nGermany – Food Packaging Plant<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our sugar mill drive specifies 160H-1 simplex chains for the cane elevator. The EP chains have been running through two grinding seasons in a highly corrosive juice environment with correct lubrication. Service life has exceeded our planned replacement interval and our maintenance team now standardises on EP H series across all mill drives.”<\/p>\n

RF, peainsener<\/strong>
\nThailand – Sugar Mill<\/p>\n<\/div>\n<\/div>\n

\n
\n

Taotle hinnapakkumist EP raskeveokite rullkettidele<\/h3>\n

Esitage keti t\u00e4histus (H-seeria ANSI number koos keerme j\u00e4relliitega v\u00f5i EP-BH\/BHF keti number), kogus meetrites v\u00f5i l\u00fclide arv ning kas on vaja kinnitus- v\u00f5i \u00fchendusl\u00fcli spetsifikatsiooni. Mittestandardsete BH\/BHF kettide puhul piisab hinnapakkumise saamiseks \u00fclaltoodud tabeli EP keti numbrist v\u00f5i m\u00f5\u00f5tude n\u00e4idisest. Meie meeskond vastab \u00fche t\u00f6\u00f6p\u00e4eva jooksul.<\/p>\n

K\u00fcsi pakkumist kohe<\/a>
\nK\u00f5ik veoahela tooted<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

H-seeria tugevamad ketid, mittestandardsed tugevad ketid, simpleks-, dupleks- ja tripleksketid. Paksemad plaadid ja suuremad tihvtid kui standardsel A-seerial sama sammuga. Samm 9,525 mm kuni 76,2 mm. Ever-Poweri tugevad seeriad *35H kuni 240H pluss mittestandardne BH\/BHF valik.<\/p>","protected":false},"featured_media":122,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-206","product","type-product","status-publish","has-post-thumbnail","product_cat-driving-chains","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product\/206","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/comments?post=206"}],"wp:attachment":[{"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/media?parent=206"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product_brand?post=206"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product_cat?post=206"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/5speedtransmission.com\/et\/wp-json\/wp\/v2\/product_tag?post=206"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}