{"id":206,"date":"2026-07-24T06:13:54","date_gmt":"2026-07-24T06:13:54","guid":{"rendered":"https:\/\/5speedtransmission.com\/?post_type=product&p=206"},"modified":"2026-07-24T06:13:54","modified_gmt":"2026-07-24T06:13:54","slug":"heavy-duty-series-roller-chains","status":"publish","type":"product","link":"https:\/\/5speedtransmission.com\/da\/vare\/heavy-duty-series-roller-chains\/","title":{"rendered":"Kraftige rullek\u00e6der i serie"},"content":{"rendered":"
\n
\n
\n

H-serien<\/p>\n

og BH \/ BHF Ikke-standard<\/p>\n<\/div>\n

\n

9,525 til 76,2 mm<\/p>\n

Toneh\u00f8jdeomr\u00e5de<\/p>\n<\/div>\n

\n

Op til 1.650 kN<\/p>\n

Triplex-brudbelastning<\/p>\n<\/div>\n

\n

ISO 9001<\/p>\n

Certificeret kvalitet<\/p>\n<\/div>\n<\/div>\n

Heavy Duty Roller Chain – Product Overview<\/h2>\n
\n
\n

Koreas evige magt kraftige serie rullek\u00e6der<\/a> are an uprated variant of the standard short pitch roller chain range, designed for applications where the operating load, shock loading severity, or duty cycle exceeds what the standard A series can comfortably handle at the same pitch. The heavy duty designation refers to thicker link plates – typically 25% to 40% heavier than the standard A series plate at the same pitch – combined with larger diameter pins and in some sizes an increased inner width, all while maintaining the same pitch so that the chain can run on standard pitch sprockets without any modification to the sprocket or drive configuration.<\/p>\n

EP H-serien d\u00e6kker k\u00e6dest\u00f8rrelser fra *35H til 240H i simplex (enkeltstrenget, suffiks -1), duplex (tostrenget, suffiks -2) og triplex (trestrenget, suffiks -3) konfigurationer. H-suffikset er branchestandardbetegnelsen for den kraftige pladegeometri: en 35H-k\u00e6de har den samme 9,525 mm stigning og samme rullediameter som en standard 35-k\u00e6de, men ledpladerne er tykkere, hvilket giver den en h\u00f8jere tr\u00e6kstyrkeklassificering og en l\u00e6ngere udmattelseslevetid under gentagen belastning. Dette er vigtigt i applikationer som landbrugsmejet\u00e6rskeres hoveddrev, t\u00f8mmerd\u00e6ksdrev, pakkemaskinehoveddrev og generelle industrielle drev, der starter og stopper under belastning, oplever vibrationer fra tilkoblede maskiner eller skal h\u00e5ndtere de st\u00f8dtoppe, der genereres, n\u00e5r sl\u00e6k pludselig kommer ud af k\u00e6den under belastningsvending.<\/p>\n

Beyond the standard H series, Korea Ever-Power manufactures a comprehensive range of non-standard heavy duty chains under the BH and BHF designations. These are chains developed for specific OEM applications where neither the standard A series nor the standard H series geometry exactly matches the sprocket tooth form or structural requirement of the original equipment. The BH range includes straight side plate variants (where the inner and outer plates are the same flat profile rather than the usual waisted figure-eight shape), flanged plate variants for guide track applications, and combination chains with mixed roller and bush positions for specific machine functions. Bush chains within both the H series and the BH range are marked with an asterisk (*) – for these chains the d1 dimension in the specification table refers to the external diameter of the bush rather than an outer roller diameter, because no separate outer roller is fitted.<\/p>\n

Korea Ever-Powers produktionslinje til tunge k\u00e6der bruger de samme koldformnings- og varmebehandlingsprocesser som A-serien, med gennemh\u00e6rdede st\u00e5lstifter, h\u00e6rdede b\u00f8sninger og varmebehandlede plader. De tungere pladesektioner i H-serien kr\u00e6ver l\u00e6ngere varmebehandlingscyklusser for at opn\u00e5 ensartede kerneegenskaber, og de st\u00f8rre stiftdiametre kr\u00e6ver n\u00f8je dimensionskontrol ved slibning for at opretholde den korrekte stift-til-b\u00f8sningsafstand for god sm\u00f8refilmfastholdelse. Forsp\u00e6nding p\u00e5f\u00f8res hver samlet H-seriek\u00e6de f\u00f8r stigningsm\u00e5ling for at eliminere installationsforl\u00e6ngelse p\u00e5 samme m\u00e5de som standard A-serien. Forbindelsesled i H-serien bruger split eller splitstiftfastholdelse i stedet for den fjederklips, der bruges i lettere standardk\u00e6der, hvilket afspejler den h\u00f8jere samlingsbelastning i tung drift.<\/p>\n<\/div>\n

\"Korea<\/div>\n<\/div>\n
\n

Dimensionsn\u00f8gle:<\/strong> P = Stigning | d1 = Rullediameter maks. (b\u00f8sningsk\u00e6de: udvendig b\u00f8sningsdiameter) | b1 = Indvendig bredde mellem pladerne min. | d2 = Stiftdiameter maks. | L = Stiftl\u00e6ngde maks. | Lc = Stiftl\u00e6ngde forbindelsesled maks. | h2 = Indvendig pladedybde maks. | T = Pladetykkelse maks. | Pt = Tv\u00e6rg\u00e5ende stigning (duplex\/triplex) | Q = Min. tr\u00e6kstyrke kN\/lbf | Q0 = Gennemsnitlig tr\u00e6kstyrke kN | q = V\u00e6gt kg\/m | * = B\u00f8sningsk\u00e6de | F = Lige (flade) sideplader<\/p>\n<\/div>\n

H Series Simplex – Single Strand (suffix -1)<\/h2>\n

Kraftig pladegeometri. Samme stigning som tilsvarende i ANSI A-serien. Tykkere plader og st\u00f8rre stifter giver h\u00f8jere tr\u00e6kstyrke og udmattelseslevetid under st\u00f8dbelastning. K\u00e6der markeret med * er b\u00f8sningsk\u00e6der.<\/p>\n

\"drivk\u00e6de-dimension-1\"<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI-nr.<\/th>\nP (mm)<\/th>\nd1 maks<\/th>\nb1 min<\/th>\nd2 maks<\/th>\nL maks.<\/th>\nLc maks.<\/th>\nh2 maks.<\/th>\nT maks.<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
EP-*35H-1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n13.3<\/td>\n14.3<\/td>\n9.00<\/td>\n1.50<\/td>\n7.9\/1795<\/td>\n10.8<\/td>\n0.41<\/td>\n<\/tr>\n
40H-1<\/strong><\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.00<\/td>\n2.03<\/td>\n14.1\/3205<\/td>\n19.1<\/td>\n0.82<\/td>\n<\/tr>\n
50H-1<\/strong><\/td>\n15.875<\/td>\n10.16<\/td>\n9.40<\/td>\n5.08<\/td>\n22.1<\/td>\n23.4<\/td>\n15.09<\/td>\n2.42<\/td>\n22.2\/5045<\/td>\n30.2<\/td>\n1.25<\/td>\n<\/tr>\n
60H-1<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.00<\/td>\n3.25<\/td>\n31.8\/7227<\/td>\n42.7<\/td>\n1.87<\/td>\n<\/tr>\n
80H-1<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n36.2<\/td>\n37.7<\/td>\n24.00<\/td>\n4.00<\/td>\n56.7\/12886<\/td>\n71.4<\/td>\n3.10<\/td>\n<\/tr>\n
100H-1<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n43.6<\/td>\n46.9<\/td>\n30.00<\/td>\n4.80<\/td>\n88.5\/20114<\/td>\n112.4<\/td>\n4.52<\/td>\n<\/tr>\n
120H-1<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n53.5<\/td>\n57.5<\/td>\n35.70<\/td>\n5.60<\/td>\n127.0\/28864<\/td>\n160.9<\/td>\n6.60<\/td>\n<\/tr>\n
140H-1<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n57.6<\/td>\n62.2<\/td>\n41.00<\/td>\n6.40<\/td>\n172.4\/39182<\/td>\n217.3<\/td>\n8.30<\/td>\n<\/tr>\n
160H-1<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n68.2<\/td>\n73.0<\/td>\n47.80<\/td>\n7.20<\/td>\n226.8\/51545<\/td>\n285.8<\/td>\n10.30<\/td>\n<\/tr>\n
180H-1<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n75.9<\/td>\n81.6<\/td>\n53.60<\/td>\n8.00<\/td>\n281.0\/63863<\/td>\n341.8<\/td>\n14.83<\/td>\n<\/tr>\n
200H-1<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n86.6<\/td>\n93.5<\/td>\n60.00<\/td>\n9.50<\/td>\n353.8\/80409<\/td>\n444.5<\/td>\n19.16<\/td>\n<\/tr>\n
240H-1<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n109.6<\/td>\n115.9<\/td>\n72.30<\/td>\n12.70<\/td>\n510.3\/115977<\/td>\n622.5<\/td>\n30.40<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Duplex – Two Strand (suffix -2)<\/h2>\n

Kraftige duplexk\u00e6der fordobler lasteevnen ved samme deling. Pt = tv\u00e6rg\u00e5ende deling mellem tr\u00e5dcentre. F\u00e5s i delingst\u00f8rrelser fra 60H til 240H.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI-nr.<\/th>\nP (mm)<\/th>\nd1 maks<\/th>\nb1 min<\/th>\nd2 maks<\/th>\nL maks.<\/th>\nLc maks.<\/th>\nh2 maks.<\/th>\nT maks.<\/th>\nPt (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
60H-2<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n55.3<\/td>\n57.1<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n63.6\/14455<\/td>\n84.5<\/td>\n3.71<\/td>\n<\/tr>\n
80H-2<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n68.8<\/td>\n70.3<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n113.4\/25773<\/td>\n145.3<\/td>\n6.15<\/td>\n<\/tr>\n
100H-2<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n82.7<\/td>\n86.0<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n177.0\/40227<\/td>\n225.9<\/td>\n9.03<\/td>\n<\/tr>\n
120H-2<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n102.4<\/td>\n106.4<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n254.0\/57727<\/td>\n322.7<\/td>\n13.13<\/td>\n<\/tr>\n
140H-2<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n109.8<\/td>\n114.4<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n344.8\/78364<\/td>\n437.7<\/td>\n16.60<\/td>\n<\/tr>\n
160H-2<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n130.1<\/td>\n134.9<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n453.6\/103091<\/td>\n571.6<\/td>\n20.20<\/td>\n<\/tr>\n
180H-2<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n146.5<\/td>\n155.6<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n562\/127726<\/td>\n680.0<\/td>\n29.20<\/td>\n<\/tr>\n
200H-2<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n164.9<\/td>\n171.8<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n707.6\/160818<\/td>\n894.9<\/td>\n38.11<\/td>\n<\/tr>\n
240H-2<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n212.6<\/td>\n223.1<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1000\/227270<\/td>\n1200.0<\/td>\n60.50<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

H Series Triplex – Three Strand (suffix -3)<\/h2>\n

Kraftige triplexk\u00e6der med tredobbelt belastningskapacitet. Pt p\u00e5f\u00f8res mellem hvert tilst\u00f8dende tr\u00e5dpar. F\u00e5s i 60H til 240H stigningsst\u00f8rrelser.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO\/ANSI-nr.<\/th>\nP (mm)<\/th>\nd1 maks<\/th>\nb1 min<\/th>\nd2 maks<\/th>\nL maks.<\/th>\nLc maks.<\/th>\nh2 maks.<\/th>\nT maks.<\/th>\nPt (mm)<\/th>\nQ min (kN\/lbf)<\/th>\nQ0 (kN)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
60H-3<\/strong><\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n81.4<\/td>\n83.2<\/td>\n18.00<\/td>\n3.25<\/td>\n26.11<\/td>\n95.4\/21682<\/td>\n113.9<\/td>\n5.54<\/td>\n<\/tr>\n
80H-3<\/strong><\/td>\n25.400<\/td>\n15.88<\/td>\n15.75<\/td>\n7.92<\/td>\n101.4<\/td>\n102.9<\/td>\n24.00<\/td>\n4.00<\/td>\n32.59<\/td>\n170.1\/38659<\/td>\n203.5<\/td>\n9.42<\/td>\n<\/tr>\n
100H-3<\/strong><\/td>\n31.750<\/td>\n19.05<\/td>\n18.90<\/td>\n9.53<\/td>\n121.8<\/td>\n125.1<\/td>\n30.00<\/td>\n4.80<\/td>\n39.09<\/td>\n265.5\/60341<\/td>\n314.8<\/td>\n12.96<\/td>\n<\/tr>\n
120H-3<\/strong><\/td>\n38.100<\/td>\n22.23<\/td>\n25.22<\/td>\n11.10<\/td>\n151.2<\/td>\n155.2<\/td>\n35.70<\/td>\n5.60<\/td>\n48.87<\/td>\n381.0\/86591<\/td>\n444.7<\/td>\n19.64<\/td>\n<\/tr>\n
140H-3<\/strong><\/td>\n44.450<\/td>\n25.40<\/td>\n25.22<\/td>\n12.70<\/td>\n162.0<\/td>\n166.6<\/td>\n41.00<\/td>\n6.40<\/td>\n52.20<\/td>\n517.2\/117545<\/td>\n598.4<\/td>\n24.90<\/td>\n<\/tr>\n
160H-3<\/strong><\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n14.27<\/td>\n192.0<\/td>\n196.8<\/td>\n47.80<\/td>\n7.20<\/td>\n61.90<\/td>\n680.4\/154636<\/td>\n787.3<\/td>\n30.10<\/td>\n<\/tr>\n
180H-3<\/strong><\/td>\n57.150<\/td>\n35.71<\/td>\n35.48<\/td>\n17.46<\/td>\n215.7<\/td>\n224.8<\/td>\n53.60<\/td>\n8.00<\/td>\n69.16<\/td>\n843\/191589<\/td>\n1011.0<\/td>\n44.10<\/td>\n<\/tr>\n
200H-3<\/strong><\/td>\n63.500<\/td>\n39.68<\/td>\n37.85<\/td>\n19.85<\/td>\n243.2<\/td>\n250.1<\/td>\n60.00<\/td>\n9.50<\/td>\n78.31<\/td>\n1061.4\/241227<\/td>\n1228.2<\/td>\n57.06<\/td>\n<\/tr>\n
240H-3<\/strong><\/td>\n76.200<\/td>\n47.63<\/td>\n47.35<\/td>\n23.81<\/td>\n313.8<\/td>\n324.3<\/td>\n72.30<\/td>\n12.70<\/td>\n101.22<\/td>\n1500\/340905<\/td>\n1650.0<\/td>\n91.00<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Ikke-standardiserede kraftige k\u00e6der (BH\/BHF-serien)<\/h2>\n

Ikke-standardiserede kraftige k\u00e6der produceret med EP-k\u00e6denummerering til specifikke OEM-applikationer. Omfatter varianter med lige sideplader (markeret F), varianter med flangeplader og kombinationsdesign. * angiver b\u00f8sningsk\u00e6de; d1 for disse er b\u00f8sningens udvendige diameter. F angiver lige (flade) sideplader.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
EP-k\u00e6de nr.<\/th>\nP (mm)<\/th>\nd1 maks<\/th>\nb1 min<\/th>\nd2 maks<\/th>\nL maks.<\/th>\nLc maks.<\/th>\nh2 maks.<\/th>\nt\/T<\/th>\nQ min (kN\/lbf)<\/th>\nq (kg\/m\u00b2)<\/th>\n<\/tr>\n<\/thead>\n
EP-04BH<\/td>\n6.000<\/td>\n4.00<\/td>\n2.80<\/td>\n1.85<\/td>\n8.4<\/td>\n9.4<\/td>\n5.0<\/td>\n0.90<\/td>\n5.00\/1136<\/td>\n0.14<\/td>\n<\/tr>\n
EP-*06BH<\/td>\n9.525<\/td>\n6.35<\/td>\n5.72<\/td>\n3.28<\/td>\n14.4<\/td>\n15.4<\/td>\n8.2<\/td>\n1.60<\/td>\n11.25\/2557<\/td>\n0.51<\/td>\n<\/tr>\n
*35HF1<\/td>\n9.525<\/td>\n5.08<\/td>\n4.77<\/td>\n3.58<\/td>\n14.6<\/td>\n15.6<\/td>\n9.0<\/td>\n1.80<\/td>\n9.00\/2023<\/td>\n0.47<\/td>\n<\/tr>\n
EP-08AHF1<\/td>\n12.700<\/td>\n7.95<\/td>\n10.00<\/td>\n3.96<\/td>\n21.0<\/td>\n22.2<\/td>\n12.0<\/td>\n2.03<\/td>\n13.80\/3136<\/td>\n0.88<\/td>\n<\/tr>\n
EP-08BH<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n18.8<\/td>\n19.9<\/td>\n11.8<\/td>\n2.03<\/td>\n20.60\/4682<\/td>\n0.79<\/td>\n<\/tr>\n
41HF1<\/td>\n12.700<\/td>\n7.77<\/td>\n6.25<\/td>\n3.58<\/td>\n16.7<\/td>\n18.0<\/td>\n9.9<\/td>\n2.03<\/td>\n9.00\/2023<\/td>\n0.59<\/td>\n<\/tr>\n
EP-*C40HF3<\/td>\n12.700<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n18.8<\/td>\n19.9<\/td>\n12.0<\/td>\n2.03<\/td>\n20.00\/4496<\/td>\n0.94<\/td>\n<\/tr>\n
EP-*C08BHF8<\/td>\n12.700<\/td>\n8.51<\/td>\n7.85<\/td>\n4.45<\/td>\n19.9<\/td>\n21.0<\/td>\n11.8<\/td>\n2.42\/2.03<\/td>\n25.00\/5620<\/td>\n1.04<\/td>\n<\/tr>\n
EP-10BH<\/td>\n15.875<\/td>\n10.16<\/td>\n9.65<\/td>\n5.08<\/td>\n20.2<\/td>\n21.6<\/td>\n14.7<\/td>\n1.85<\/td>\n25.00\/5681<\/td>\n1.03<\/td>\n<\/tr>\n
EP-10BHF1<\/td>\n15.875<\/td>\n10.16<\/td>\n6.45<\/td>\n5.08<\/td>\n18.0<\/td>\n19.8<\/td>\n14.7<\/td>\n2.10<\/td>\n23.60\/5305<\/td>\n1.05<\/td>\n<\/tr>\n
EP-12BH<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.2<\/td>\n26.8<\/td>\n16.0<\/td>\n2.42<\/td>\n40.00\/9091<\/td>\n1.45<\/td>\n<\/tr>\n
EP-12BHF1<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n25.0<\/td>\n27.2<\/td>\n16.5<\/td>\n2.50<\/td>\n44.00\/10000<\/td>\n1.46<\/td>\n<\/tr>\n
EP-12BHF2<\/td>\n19.050<\/td>\n12.07<\/td>\n13.30<\/td>\n6.10<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.72<\/td>\n<\/tr>\n
EP-12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n13.50<\/td>\n5.72<\/td>\n28.8<\/td>\n30.3<\/td>\n16.5<\/td>\n2.80<\/td>\n35.00\/7954<\/td>\n1.71<\/td>\n<\/tr>\n
EP-12BV<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.94<\/td>\n24.5<\/td>\n26.5<\/td>\n16.0<\/td>\n2.42<\/td>\n36.00\/8182<\/td>\n1.43<\/td>\n<\/tr>\n
EP-60HV<\/td>\n19.050<\/td>\n11.91<\/td>\n12.57<\/td>\n5.94<\/td>\n29.2<\/td>\n31.0<\/td>\n18.0<\/td>\n3.25<\/td>\n40.00\/9090<\/td>\n2.00<\/td>\n<\/tr>\n
EP-12AHF7<\/td>\n19.050<\/td>\n11.91<\/td>\n9.50<\/td>\n5.94<\/td>\n25.9<\/td>\n27.7<\/td>\n18.0<\/td>\n3.25<\/td>\n49.00\/11015<\/td>\n1.78<\/td>\n<\/tr>\n
EP-12AHF101<\/td>\n19.050<\/td>\n11.91<\/td>\n9.40<\/td>\n5.94<\/td>\n26.3<\/td>\n28.1<\/td>\n18.0<\/td>\n3.25<\/td>\n53.00\/11914<\/td>\n1.81<\/td>\n<\/tr>\n
EP-12BHF5<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n6.10<\/td>\n25.2<\/td>\n26.8<\/td>\n17.9<\/td>\n2.42<\/td>\n40.00\/8992<\/td>\n1.60<\/td>\n<\/tr>\n
EP-*C12BHF3<\/td>\n19.050<\/td>\n12.07<\/td>\n11.68<\/td>\n5.72<\/td>\n29.3<\/td>\n31.2<\/td>\n20.0<\/td>\n4.00\/3.00<\/td>\n31.40\/7059<\/td>\n2.38<\/td>\n<\/tr>\n
EP-16BH<\/td>\n25.400<\/td>\n15.88<\/td>\n17.02<\/td>\n8.90<\/td>\n35.7<\/td>\n38.9<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n3.11<\/td>\n<\/tr>\n
EP-16BHF3<\/td>\n25.400<\/td>\n15.88<\/td>\n12.70<\/td>\n8.90<\/td>\n31.6<\/td>\n35.0<\/td>\n24.1<\/td>\n4.00\/3.10<\/td>\n80.00\/18182<\/td>\n2.90<\/td>\n<\/tr>\n
EP-*C20AHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.05<\/td>\n10.32<\/td>\n43.6<\/td>\n46.9<\/td>\n30.0<\/td>\n6.00\/4.80<\/td>\n146.00\/32821<\/td>\n5.40<\/td>\n<\/tr>\n
EP-20BH<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n26.4<\/td>\n6.00\/4.80<\/td>\n95.00\/21356<\/td>\n4.52<\/td>\n<\/tr>\n
EP-20BHF1<\/td>\n31.750<\/td>\n19.05<\/td>\n19.56<\/td>\n10.19<\/td>\n47.1<\/td>\n51.0<\/td>\n29.2<\/td>\n6.00\/4.80<\/td>\n100.00\/33720<\/td>\n5.09<\/td>\n<\/tr>\n
EP-24BH<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n58.6<\/td>\n63.4<\/td>\n36.2<\/td>\n7.50\/6.00<\/td>\n225.00\/51136<\/td>\n9.00<\/td>\n<\/tr>\n
EP-24BHF2<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n57.8<\/td>\n62.2<\/td>\n37.0<\/td>\n7.20\/6.00<\/td>\n225.40\/51226<\/td>\n9.06<\/td>\n<\/tr>\n
EP-24BHF5<\/td>\n38.100<\/td>\n25.40<\/td>\n25.40<\/td>\n14.63<\/td>\n64.6<\/td>\n69.1<\/td>\n36.2<\/td>\n9.00\/7.50<\/td>\n270.00\/61344<\/td>\n10.60<\/td>\n<\/tr>\n
EP-28BH<\/td>\n44.450<\/td>\n27.94<\/td>\n30.99<\/td>\n15.90<\/td>\n69.6<\/td>\n75.0<\/td>\n36.7<\/td>\n8.50\/7.20<\/td>\n200.00\/44960<\/td>\n9.99<\/td>\n<\/tr>\n
EP-32AHF1<\/td>\n50.800<\/td>\n28.58<\/td>\n31.55<\/td>\n15.90<\/td>\n75.4<\/td>\n80.3<\/td>\n47.8<\/td>\n9.00<\/td>\n222.40\/49996<\/td>\n13.36<\/td>\n<\/tr>\n
EP-32BH<\/td>\n50.800<\/td>\n29.21<\/td>\n30.99<\/td>\n17.81<\/td>\n72.0<\/td>\n77.2<\/td>\n42.0<\/td>\n8.00<\/td>\n250.00\/56200<\/td>\n11.26<\/td>\n<\/tr>\n
EP-32BHF1<\/td>\n50.800<\/td>\n29.21<\/td>\n31.55<\/td>\n17.81<\/td>\n69.9<\/td>\n74.7<\/td>\n48.2<\/td>\n8.00\/7.15<\/td>\n350.00\/78680<\/td>\n13.20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

\"\"<\/p>\n

\n

Hvorn\u00e5r skal man v\u00e6lge Heavy Duty-serien frem for Standard A-serien<\/h2>\n
\n
\n

Hyppig start-stop under belastning<\/h3>\n

Hver stop-start-cyklus introducerer en tr\u00e6kst\u00f8dimpuls i k\u00e6den, n\u00e5r den l\u00f8se side pludselig tr\u00e6kkes stramt. De tykkere plader i H-serien har et h\u00f8jere tv\u00e6rsnitsareal og dermed en h\u00f8jere udmattelsesgr\u00e6nse under gentagne tr\u00e6kcyklusser. Applikationer, der starter og stopper mere end 20 gange i timen under belastning, b\u00f8r som minimum specificere H-serien.<\/p>\n<\/div>\n

\n

P\u00e5virkning fra tilkoblede maskiner<\/h3>\n

Stempelpressere, stempelpressere, k\u00e6beknusere og r\u00f8rslibere genererer alle skarpe st\u00f8dimpulser gennem deres drivk\u00e6de. Servicefaktoren for s\u00e5danne applikationer n\u00e5r typisk 1,5 til 2,0 p\u00e5 standard A-serien, hvilket g\u00f8r H-serien til det rigtige valg uden at kr\u00e6ve en overgang til en st\u00f8rre stigning eller flere strenge.<\/p>\n<\/div>\n

\n

Landbrugsdrev med tunge maskiner<\/h3>\n

Mejet\u00e6rskernes hoveddrev, halmrystere og t\u00e6rskev\u00e6rksdrev kombinerer alle h\u00f8je, intermitterende belastninger med st\u00f8d fra afgr\u00f8deindtagelse. H-serien er bredt specificeret som OEM-udstyr til disse drev, fordi de tykkere plader forl\u00e6nger levetiden i markforhold, hvor k\u00e6deudskiftning er dyrt og ubelejligt.<\/p>\n<\/div>\n

\n

H\u00f8jvibrationsmilj\u00f8<\/h3>\n

Vibrationssigter, vibrerende f\u00f8dere, vibrationstransport\u00f8rer og knusere overf\u00f8rer alle h\u00f8jfrekvente vibrationer til drivk\u00e6den gennem tandhjulet og akslen. Udmattelsesrevner i ledplader starter lettest ved kanten af \u200b\u200b\u200b\u200bbolthullet under vekslende belastning. H-seriens tykkere plade fordeler denne belastning over et st\u00f8rre omr\u00e5de og modst\u00e5r revnedannelse.<\/p>\n<\/div>\n

\n

Samme tandhjul, h\u00f8jere kapacitet<\/h3>\n

H-serien bruger samme stigning som den tilsvarende A-serie, s\u00e5 den passer til de samme tandhjul uden nogen \u00e6ndringer af drivlinjen. Hvor en standard A-seriek\u00e6de har vist sig at have utilstr\u00e6kkelig levetid, kr\u00e6ver en opgradering til H-serien kun en udskiftning af k\u00e6den, ikke en ny design af tandhjulscentre, aksler eller beskyttelsessk\u00e6rme.<\/p>\n<\/div>\n

\n

Ikke-standard OEM-krav<\/h3>\n

BH- og BHF-serien, der ikke er standard, produceres til OEM-udskiftning, hvor maskinen oprindeligt blev designet til en propriet\u00e6r k\u00e6despecifikation, der ikke er d\u00e6kket af standard H-serien. Lige sideplader (BHF), flangeplader, bredere indvendige bredder eller kombinerede rulle- og b\u00f8sningspositioner er alle tilg\u00e6ngelige. Medsend en pr\u00f8vek\u00e6de eller tegning for et tilbud.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Applikationer<\/h2>\n
\n
\n

Landbrugsmaskiner<\/h3>\n

EP 40H til 100H simplexk\u00e6der er standardspecifikationen for mejet\u00e6rskernes hoveddrev, halmrysterdrev og kornsnegledrev. 40H-1 er den mest anvendte kraftige k\u00e6de i landbrugsmaskiner p\u00e5 verdensplan. Den h\u00f8jere pladetykkelse absorberer st\u00f8dbelastningen fra afgr\u00f8deindtagelse og sten, der tr\u00e6nger ind i indf\u00f8ringsmekanismen, hvilket giver en levetid p\u00e5 cirka 40% l\u00e6ngere end den tilsvarende standard 40-k\u00e6de under de samme forhold.<\/p>\n<\/div>\n

\n

Presse- og stansedrev<\/h3>\n

Mekaniske presser, stansepresser og stemplemaskiner sender en skarp st\u00f8dimpuls gennem drivk\u00e6den i det \u00f8jeblik, stemplet ber\u00f8rer og gennembrydes. EP 80H-1, 100H-1 og 120H-1 simplex- og duplexk\u00e6der er almindeligvis specificeret til pressehoveddrev og svinghjulsdrev. Den tungere pladesektion modst\u00e5r den udmattelsesrevnedannelse, der ellers ville udvikle sig ved kanten af \u200b\u200bstifthullet under gentagne belastningscyklusser med h\u00f8j amplitude.<\/p>\n<\/div>\n

\n

Minedrift og stenbrud<\/h3>\n

EP 120H til 240H k\u00e6der til drivk\u00e6der til prim\u00e6re knusere, vibrationssigter og forpladsf\u00f8dere i minedrift og stenbrud. Duplex 120H-2 og 160H-2 er standardst\u00f8rrelsesomr\u00e5det for hoveddrev til k\u00e6beknusere. H-serien er ogs\u00e5 specificeret til drev i kulforberedelsesanl\u00e6g, hvor vand og kulst\u00f8v forurener sm\u00f8remidlet, og drevet fungerer under variabel belastning fra udsving i kulf\u00f8dehastigheden.<\/p>\n<\/div>\n

\n

Sukkerindustrien<\/h3>\n

Sugar mill main drives and cane elevator drives use EP heavy duty chains in the 100H to 200H range. The juice environment is highly corrosive to steel chain, and the cane ingestion load is unpredictable – a stone or dense root clump entering the mill can momentarily spike the load to several times the rated running load. The H series provides the combination of corrosion resistance (through correct lubrication specification) and fatigue strength required for these demanding tropical mill conditions.<\/p>\n<\/div>\n<\/div>\n

\"Kvalitetstest<\/p>\n

Matchende tandhjul og andre k\u00e6detyper<\/h2>\n
\n
\n

\"Ever-Power<\/p>\n

Matchende tandhjul til alle EP-k\u00e6dest\u00f8rrelser er tilg\u00e6ngelige via vores partners hjemmeside. tandhjulsk\u00e6de.net<\/a>Alle ANSI B29.1 og ISO 606 tandformer, simplex til 8-strenget, C45 kulstofst\u00e5l og legeret st\u00e5l, pilotboring og navdesign med f\u00e6rdig boring.<\/p>\n

Se matchende tandhjul \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

\n

Andre k\u00e6der<\/h3>\n
\n
\n

\"Korea<\/p>\n

K\u00e6der i rustfrit st\u00e5l<\/a><\/h3>\n

SUS304 og SUS316L rullek\u00e6der til f\u00f8devarer, farmaceutiske produkter og korrosive milj\u00f8er.<\/p>\n

Vis r\u00e6kkevidde<\/a><\/p>\n<\/div>\n

\n

\"Korea<\/p>\n

Landbrugsk\u00e6der<\/a><\/h3>\n

CA-, CC- og S-serien til mejet\u00e6rskere, ballepressere og afgr\u00f8deh\u00e5ndteringsmaskiner. ISO 487-standard.<\/p>\n

Vis r\u00e6kkevidde<\/a><\/p>\n<\/div>\n

\n

\"Korea<\/p>\n

Ingeni\u00f8rk\u00e6der<\/a><\/h3>\n

WH-svejsede st\u00e5l-, st\u00f8bte og runde ledk\u00e6der til cement, minedrift og transport af tunge anl\u00e6g.<\/p>\n

Vis r\u00e6kkevidde<\/a><\/p>\n<\/div>\n<\/div>\n

\"\"<\/div>\n<\/div>\n

Ofte stillede sp\u00f8rgsm\u00e5l<\/h2>\n
\n
\nHvad er forskellen mellem H-serien og standard A-serien ved samme toneh\u00f8jde?<\/summary>\n
The H series uses thicker link plates than the standard A series at the same pitch. For example, a standard 60 (08A) chain has a plate thickness of 2.42 mm; the 60H chain has a plate thickness of 3.25 mm – approximately 34% thicker. The larger plate cross-section gives a higher minimum tensile strength (31.8 kN versus about 31.8 kN for the standard – the gain is primarily in fatigue life and plate thickness rather than tensile strength at the smaller sizes, becoming more pronounced at 80 and above where the H series clearly outperforms the standard chain). The pin diameter and roller diameter remain the same, so H series chains run on standard pitch sprockets without any modification.<\/div>\n<\/details>\n
\nKan jeg bruge H-seriek\u00e6der p\u00e5 mine eksisterende A-serietandhjul?<\/summary>\n
Ja, H-seriens k\u00e6der k\u00f8rer p\u00e5 standard ANSI A-serie tandhjul uden nogen \u00e6ndringer. Stigningen, rullediameteren og den indre bredde p\u00e5 H-serien matcher A-seriens \u00e6kvivalenter med samme k\u00e6denummer. Den eneste dimension, der adskiller sig, er pladetykkelsen, og dette har ingen effekt p\u00e5 tandhjulets indgreb, fordi tandhjulets tandform griber ind i rullen og de indre plader i stedet for de ydre plader. De tykkere ydre plader rager simpelthen lidt l\u00e6ngere ud forbi tandhjulet, hvilket er inden for den normale designfrigang.<\/div>\n<\/details>\n
\nHvad betyder suffikskoderne p\u00e5 BH-seriek\u00e6der (BH, BHF1, BHF2 osv.)?<\/summary>\n
The BH designation identifies these as heavy duty variants of the ISO B series roller chain geometry, produced by Ever-Power for specific OEM applications. The F in BHF stands for flat side plate (also called straight side plate) – a plate shape where the inner and outer plates are the same rectangular profile rather than the usual waisted figure-eight shape used in standard roller chains. The number after F identifies the specific plate profile variant (F1, F2, F3, F5 etc. are different proprietary plate dimensions used by different OEM machine manufacturers). The V suffix (as in 12BV or 60HV) identifies a chain with a specific plate profile used in high-speed applications. When ordering BH or BHF chains as replacements, always provide the complete EP chain number from the specification table and verify against a sample of the original chain.<\/div>\n<\/details>\n
\nEr sm\u00f8ringen anderledes for H-serien sammenlignet med standardk\u00e6der?<\/summary>\n
The lubrication requirements for H series chains are the same as for standard A series chains at the same pitch and speed – mineral oil applied at the pin-bush joint by drip oiler, bath, or spray system depending on chain speed. The lubrication method does not need to change when upgrading from A series to H series. What does sometimes change is the lubrication interval in severe applications: because the H series is typically specified for shock-loaded drives with more demanding duty cycles, more frequent oil replenishment may be required to maintain the oil film under high joint-load conditions. For drives with service factors above 1.5, consider a continuous drip oiler even at speeds below 1 m\/s.<\/div>\n<\/details>\n
\nHvilke forbindelsesled bruges til H-seriek\u00e6der?<\/summary>\n
H-serie k\u00e6der bruger splitforbindelsesled (splitstift) i stedet for fjederclipsforbindelsesled, hvilket afspejler den h\u00f8jere ledbelastning i tunge applikationer. Splitstiftforbindelsen er mere sikker under st\u00f8dbelastning end fjederclipsen, som kan l\u00f8sne sig, hvis k\u00e6den vibrerer aggressivt. For k\u00e6der 40H til 60H er et dobbelt splitforbindelsesled standard. For 80H og derover f\u00e5s et boltet forbindelsesled med sekskantbolte og l\u00e5sem\u00f8trikker som et alternativ til splitstiften til applikationer, hvor forbindelsesleddet skal fjernes og monteres ofte. Udskift altid forbindelsesleddet ved hver k\u00e6deudskiftning, uanset dets synlige tilstand.<\/div>\n<\/details>\n
\nKan I levere ikke-standardiserede BH- og BHF-k\u00e6der som erstatning for eksisterende maskiner?<\/summary>\n
Ja. BH- og BHF-serien er specifikt beregnet som OEM-udskiftning til maskiner, der bruger ikke-standardiserede k\u00e6despecifikationer. Hvis dit k\u00e6denummer vises i BH- eller BHF-tabellen ovenfor, bedes du angive EP-k\u00e6denummeret, antal i meter eller antal led, og om der er behov for et forbindelsesled. Hvis din k\u00e6de ikke vises i tabellen, skal du sende en pr\u00f8ve p\u00e5 mindst 5 sammenh\u00e6ngende led til dimensionsopm\u00e5ling, og EP vil identificere det n\u00e6rmeste match eller producere en specialk\u00e6de efter dine pr\u00f8vedimensioner med en minimumsbestillingsm\u00e6ngde p\u00e5 10 meter. Ved hastende udskiftninger bedes du angive: deling (m\u00e5lt p\u00e5 tv\u00e6rs af 10 p\u00e5 hinanden f\u00f8lgende stiftcentre, divideret med 10), rullediameter eller b\u00f8snings udvendig diameter, indvendig bredde mellem pladerne, stiftdiameter og pladetykkelse. Fotografier fra b\u00e5de forside og kant er ogs\u00e5 nyttige til at identificere pladeprofiltypen.<\/div>\n<\/details>\n<\/div>\n

Hvad vores kunder siger<\/h2>\n
\n
\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We upgraded our combine harvester main drive from standard 80 chain to EP 80H-1. The previous standard chains were needing replacement every harvest season. The 80H chains have now run for three full harvests with elongation at 1.6% – well within the 3% replacement threshold. The cost per season is significantly lower even though the EP 80H chain has a higher purchase price.”<\/p>\n

BK, fl\u00e5deingeni\u00f8r<\/strong>
\nUkraine – Large Grain Farm<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our jaw crusher main drive uses 120H-2 duplex chains. We had a history of fatigue plate fractures with previous supplier chains approximately every 8 months. EP 120H-2 chains have been running for 19 months without any plate fracture or connecting link failure. The improvement is directly attributable to the consistent plate hardness across the batch – no soft spots.”<\/p>\n

AO, Vedligeholdelsesinspekt\u00f8r<\/strong>
\nSouth Africa – Aggregate Quarry<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“We needed a 12BHF2 non-standard chain to replace the original OEM specification on our packaging machine elevator drive. EP confirmed the chain from our EP chain number, delivered 5 complete circuit lengths cut and fitted with connecting links within 9 working days. The chains matched the original dimensions exactly and fitted without adjustment.”<\/p>\n

PW, Teknisk Chef<\/strong>
\nGermany – Food Packaging Plant<\/p>\n<\/div>\n

\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Our sugar mill drive specifies 160H-1 simplex chains for the cane elevator. The EP chains have been running through two grinding seasons in a highly corrosive juice environment with correct lubrication. Service life has exceeded our planned replacement interval and our maintenance team now standardises on EP H series across all mill drives.”<\/p>\n

RF, chefingeni\u00f8r<\/strong>
\nThailand – Sugar Mill<\/p>\n<\/div>\n<\/div>\n

\n
\n

Anmod om et tilbud p\u00e5 kraftige EP-rullek\u00e6der<\/h3>\n

Angiv k\u00e6debetegnelsen (H-seriens ANSI-nummer med tr\u00e5dsuffiks eller EP-BH\/BHF-k\u00e6denummer), antal i meter eller ledantal, og om der er behov for specifikation for fastg\u00f8relses- eller forbindelsesled. For ikke-standardiserede BH\/BHF-k\u00e6der er EP-k\u00e6denummeret fra ovenst\u00e5ende tabel eller en dimensionspr\u00f8ve tilstr\u00e6kkeligt til tilbuddet. Vores team svarer inden for en hverdag.<\/p>\n

F\u00e5 et tilbud nu<\/a>
\nAlle produkter til drivk\u00e6der<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

H-seriens kraftige k\u00e6der, ikke-standardiserede kraftige k\u00e6der, simplex, duplex og triplex. Tykkere plader og st\u00f8rre stifter end standard A-serien ved samme stigning. Stigning 9,525 mm til 76,2 mm. Ever-Power kraftige serier *35H til 240H plus BH\/BHF ikke-standard serie.<\/p>","protected":false},"featured_media":122,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-206","product","type-product","status-publish","has-post-thumbnail","product_cat-driving-chains","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/5speedtransmission.com\/da\/wp-json\/wp\/v2\/product\/206","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/5speedtransmission.com\/da\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/5speedtransmission.com\/da\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/5speedtransmission.com\/da\/wp-json\/wp\/v2\/comments?post=206"}],"wp:attachment":[{"href":"https:\/\/5speedtransmission.com\/da\/wp-json\/wp\/v2\/media?parent=206"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/5speedtransmission.com\/da\/wp-json\/wp\/v2\/product_brand?post=206"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/5speedtransmission.com\/da\/wp-json\/wp\/v2\/product_cat?post=206"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/5speedtransmission.com\/da\/wp-json\/wp\/v2\/product_tag?post=206"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}